Make sure this part fits

Oldsmobile 26055390 Front Wheel Drive Shaft Kit

1991-1996 Oldsmobile Bravada

Customer Questions & Expert Answers (17)
GM 26055390 Front Wheel Drive Shaft Kit
  • Part Description
    Shaft Kit,Front Wheel Drive
  • Position
    Front
  • Replaces
    26027966, 7844070, 07844070
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Oldsmobile
    Manufacturer Part Number26055390
    Part DescriptionShaft Kit,Front Wheel Drive
    Other NamesAxle Assembly
    Item Dimensions26.5 x 6.9 x 7.5 inches
    Item Weight21.30 Pounds
    PositionFront
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces26027966, 7844070, 07844070
    ManufacturerGeneral Motors
    SKU26055390
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    1996, 1991-1994 Oldsmobile Bravada6 Cyl 4.3LBRAVADA
  • Customer Questions & Expert Answers

    Q:
    I would like to confirm if this is the correct part number for my vehicle. Please advise. Thank you. Posted by GMPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 26055390 fits your vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    What should you do with the shock absorbers for the 2000 Chevrolet Blazer? Posted by Customer
    A:
    Disconnect and compress the shock absorbers.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What are the steps for reinstalling the C-locks and pinion shaft for locking differentials for the 2001 Chevrolet Blazer? Posted by Customer
    A:
    For locking differentials, install the C-locks with the pinion shaft partially withdrawn, ensuring they are positioned correctly. Withdraw the axleshaft carefully until the C-lock clears the thrust block. Once the C-locks are installed, push the pinion shaft into place with the groove lined up with the lock bolt hole, then install the lock bolt.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What may be required for overhauling the differential, and why may it not be cost-effective for a do-it-yourselfer for the 1999 Chevrolet Blazer? Posted by Customer
    A:
    Overhauling the differential may require special tools, and it is not typically cost-effective for a do-it-yourselfer. Professional expertise and equipment are often needed for this type of work.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should you remove before removing the driveaxle assembly for the 2000 Chevrolet Blazer? Posted by Customer
    A:
    Remove the steering knuckle.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should you do with the brake drums for the 1994 Chevrolet S10? Posted by Customer
    A:
    Remove the brake drums.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should be done after removing the brake drum for conventional differentials for the 2003 Chevrolet S10? Posted by Customer
    A:
    After removing the brake drum for conventional differentials, the differential cover should be removed, and the lubricant should be allowed to drain into a container.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What are the initial steps for removing the rear differential for the 1996 GMC Jimmy? Posted by Customer
    A:
    The initial steps for removing the rear differential are as follows: Raise the rear of the vehicle and support it securely on jackstands. Remove the wheel and brake drum. For vehicles with a locking differential, remove both rear wheels and brake drums.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How do you start removing the rear axle assembly for the 1995 GMC Jimmy? Posted by Customer
    A:
    Start by loosening the rear wheel lug nuts and raising the rear of the vehicle with jackstands placed under the frame.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How are the driveaxles retained in the 1997 GMC Jimmy? Posted by Customer
    A:
    The driveaxles are retained by snap rings at the inner end of the tri-pot joints.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should be considered before assuming an axle problem, and why for the 2001 GMC Jimmy? Posted by Customer
    A:
    Before assuming the axle is the problem, it is important to check for other possible causes. Road noise, tire noise, and engine and transmission noise can be mistaken for axle issues.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What type of rear axle assembly is used in the 2000 Chevrolet S10, and what is its purpose? Posted by Customer
    A:
    The rear axle assembly is a hypoid, semi-floating type with a differential. Its purpose is to allow the outer rear tire to turn more quickly than the inner tire when the vehicle goes around a corner, ensuring smooth handling.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How do you remove the driveaxle for the 1996 Chevrolet S10? Posted by Customer
    A:
    Start by loosening the wheel lug nuts and raising the vehicle on jackstands. Remove the wheel.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How do you remove the C-lock and axleshaft for conventional differentials for the 1996 GMC Sonoma? Posted by Customer
    A:
    Have an assistant push in on the outer flanged end of the axle shaft while you remove the C-lock from the groove in the inner end of the shaft.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should you do with the brake drums for the 1995 GMC Sonoma? Posted by Customer
    A:
    Remove the brake drums.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What is the purpose of the optional locking limited-slip rear axle, and how does it work for the 1995 GMC Sonoma? Posted by Customer
    A:
    The optional locking limited-slip rear axle allows for normal operation until one wheel loses traction. This differential includes a pair of clutch "cones" that slow the rotation of the differential case when one wheel is on a firm surface and the other on a slippery one, equalizing the rotation speed of the axleshaft driving the wheel with traction.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should you do before removing the driveaxle flange bolts for the 2002 GMC Sonoma? Posted by Customer
    A:
    Mark the relationship of the inner CV joint to the flange.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 26055390, the Right Choice

To ensure reliability, purchase GM part # 26055390 Front Wheel Drive Shaft Kit. It is sometimes referred to as Oldsmobile Axle Shaft. Directly from GM, genuine parts are superb with regards to quality, longevity, and fit. Every single part passed stringent quality testing, so you can be sure that it's safe, durable, and built to perform like your original parts. This part fits specific Oldsmobile Bravada models.

GMPartsGiant.com is a leading supplier of genuine GM parts and accessories such as GM 26055390 Front Wheel Drive Shaft Kit. You're certainly in the right place if you're searching for the great cost-effective OEM GM parts. Look no further than our vast inventory of genuine GM parts offered at unbeatable online prices, all of which are backed by the manufacturer's warranty. Not to forget, our hassle-free return policy and quick delivery service ensure a smooth shopping experience for you. For detailed Oldsmobile parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly