Make sure this part fits

Oldsmobile 14041986 Differential Shaft Assembly

1991-1996 Oldsmobile Bravada

Customer Questions & Expert Answers (17)
GM 14041986 Differential Shaft Assembly
  • Part Description
    Shaft Assembly, Differential
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Oldsmobile
    Manufacturer Part Number14041986
    Part DescriptionShaft Assembly, Differential
    Item Dimensions7.9 x 7.5 x 7.7 inches
    Item Weight4.20 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU14041986
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    1996, 1991-1994 Oldsmobile Bravada6 Cyl 4.3LBRAVADA
  • Customer Questions & Expert Answers

    Q:
    I am wonder if this is complete and correct part for my vehicle. Posted by GMPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 14041986 fits your vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    What are the steps for reinstalling the C-locks and pinion shaft for conventional differentials for the 2002 Chevrolet Blazer? Posted by Customer
    A:
    For conventional differentials, install the C-lock in the axleshaft groove and pull out on the flange to lock it. Insert the pinion shaft, align the hole in the shaft with the lock bolt hole, and install the lock bolt.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should you do with the brake drums for the 2000 Chevrolet Blazer? Posted by Customer
    A:
    Remove the brake drums.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How can you release the driveaxles in the 1998 Chevrolet Blazer? Posted by Customer
    A:
    Hit the inner part of the tri-pot housing with a hammer and a piece of wood until the snap-ring releases.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How are the axle shafts connected to the differential in the rear axle assembly for the 2001 Chevrolet Blazer? Posted by Customer
    A:
    The axle shafts are splined to the differential side gears, causing the inner tire to turn more slowly than the outer tire during cornering. The differential pinion gears roll around the slower side gear, driving the outer side gear and tire more quickly.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How do you install the driveaxle for the 1998 GMC Jimmy? Posted by Customer
    A:
    Simply reverse the removal steps, making sure to tighten the driveaxle hub nut and CV joint flange bolts to the specified torque.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What may be required for overhauling the differential, and why may it not be cost-effective for a do-it-yourselfer for the 1998 GMC Jimmy? Posted by Customer
    A:
    Overhauling the differential may require special tools, and it is not typically cost-effective for a do-it-yourselfer. Professional expertise and equipment are often needed for this type of work.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should be done after removing the brake drum for conventional differentials for the 1997 GMC Jimmy? Posted by Customer
    A:
    After removing the brake drum for conventional differentials, the differential cover should be removed, and the lubricant should be allowed to drain into a container.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How do you remove the C-locks and axleshafts for locking differentials for the 1998 Chevrolet S10? Posted by Customer
    A:
    Rotate the differential until the pinion shaft touches the case, providing enough clearance for access to the C-locks. Use a screwdriver to rotate the C-lock until the open endpoints align, then push the axleshaft in and remove the C-lock. Repeat this process for the opposite axleshaft.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How are the driveaxles retained in the 2004 Chevrolet S10? Posted by Customer
    A:
    The driveaxles are retained by snap rings at the inner end of the tri-pot joints.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How do you install the rear axle assembly for the 1994 Chevrolet S10? Posted by Customer
    A:
    Reverse the removal steps and make sure to lower the vehicle weight onto the wheels before tightening the U-bolt nuts completely.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should be considered before assuming an axle problem, and why for the 1994 Chevrolet S10? Posted by Customer
    A:
    Before assuming the axle is the problem, it is important to check for other possible causes. Road noise, tire noise, and engine and transmission noise can be mistaken for axle issues.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should you do with the driveshaft for the 1995 GMC Jimmy? Posted by Customer
    A:
    Disconnect the driveshaft and secure it out of the way.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What type of front axle assembly is used in the 1999 GMC Sonoma, and how does it function? Posted by Customer
    A:
    4WD models use a fully independent front axle assembly consisting of a differential and a pair of drive axles with inner and outer constant velocity (CV) joints. An extension axleshaft is employed on the right side to compensate for the distance difference between the differential and the right front wheel.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should you do after disconnecting the U-bolts for the 1994 GMC Sonoma? Posted by Customer
    A:
    Remove the spacers and clamp plates.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What are the final steps for reassembling the rear differential after installing the axleshafts and pinion shaft for the 1994 GMC Sonoma? Posted by Customer
    A:
    Finally, install the differential cover and fill it with the specified lubricant. Install the brake drums and wheels, and lower the vehicle.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How do you remove the driveaxle for the 2002 GMC Sonoma? Posted by Customer
    A:
    Start by loosening the wheel lug nuts and raising the vehicle on jackstands. Remove the wheel.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 14041986, the Right Choice

To ensure reliability, purchase GM part # 14041986 Differential Shaft Assembly. It is sometimes referred to as Oldsmobile Axle Shaft. Directly from GM, genuine parts are superb with regards to quality, longevity, and fit. Every single part passed stringent quality testing, so you can be sure that it's safe, durable, and built to perform like your original parts. This part fits specific Oldsmobile Bravada models.

GMPartsGiant.com is a leading supplier of genuine GM parts and accessories such as GM 14041986 Differential Shaft Assembly. You're certainly in the right place if you're searching for the great cost-effective OEM GM parts. Look no further than our vast inventory of genuine GM parts offered at unbeatable online prices, all of which are backed by the manufacturer's warranty. Not to forget, our hassle-free return policy and quick delivery service ensure a smooth shopping experience for you. For detailed Oldsmobile parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly