Make sure this part fits

Oldsmobile 12462265 Engine Coolant Pump Kit

1987-1996 Oldsmobile

Customer Questions & Expert Answers (7)
GM 12462265 Engine Coolant Pump Kit
  • Part Description
    Pump Kit,Water
  • Replaces
    12363169, 12518443
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Oldsmobile
    Manufacturer Part Number12462265
    Part DescriptionPump Kit,Water
    Other NamesWater Pump, Water Pump Assembly
    Item Dimensions6.8 x 6.4 x 5.4 inches
    Item Weight2.40 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces12363169, 12518443
    ManufacturerGeneral Motors
    SKU12462265
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    1993-1996 Oldsmobile Cutlass4 Cyl 2.2LS 4 DOOR, S STATION WAGON, SL 4 DOOR, SL STATION WAGON
    1987-1988 Oldsmobile Firenza4 Cyl 2.0L2 DOOR, 2 DOOR NOTCHBACK, 2 DOOR PLAIN BACK HATCHBACK, 4 DOOR, BROUGHAM 2 DOOR NOTCHBACK, BROUGHAM 2 DOOR PLAIN BACK, BROUGHAM 4 DOOR, STATION WAGON
  • Customer Questions & Expert Answers

    Q:
    I am wonder if this is complete and correct part for my vehicle. Posted by GMPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 12462265 fits your vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    How do I remove the water pump on Chevrolet Blazer,S10,GMC Jimmy and Sonoma? Posted by Customer
    A:
    To remove the water pump, start by disconnecting the battery cable from the negative battery terminal. Then, drain the coolant and remove the upper radiator shroud and fan/clutch assembly. Next, take off the serpentine belt and water pump pulley. Disconnect the radiator hose and heater hose from the water pump. Unbolt the water pump, tapping it with a soft-lace hammer if necessary to break the gasket seal. Inspect the pump's impeller blades for corrosion and replace the pump if needed. To install the new water pump, clean the sealing surfaces of all gasket material on both the pump and block. Apply a thin layer of RTV sealant to both sides of the new gasket and install it on the water pump. Place the water pump in position and tighten the bolts to the specified torque. The rest of the installation procedure is the reverse of the removal. Finally, add coolant to the specified level, start the engine, and check for leaks in the water pump and hoses. Bleed the cooling system of any air.
    Posted by GMPartsGiant Specialist
    Q:
    How can you determine if the water pump is functioning properly while it is still installed on the engine of the 1994 Chevrolet S10? Posted by Customer
    A:
    There are three quick-checks to determine if the water pump is functioning properly while it is still installed on the engine.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Water Pump
    Q:
    How can you remove the water pump of the 1997 Chevrolet S10? Posted by Customer
    A:
    To remove the water pump, you need to unbolt it, tapping it with a soft-lace hammer if necessary to break the gasket seal.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Water Pump
    Q:
    What is the first quick-check to determine water pump problems for the 2000 GMC Sonoma? Posted by Customer
    A:
    One way to check is to inspect the weep hole in the water pump snout for coolant leakage, indicating a failed seal.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Water Pump
    Q:
    What hoses need to be disconnected from the water pump for the 1983 Oldsmobile Cutlass? Posted by Customer
    A:
    Disconnect the lower radiator hose, heater hose, and bypass hose at the water pump.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Water Pump
    Q:
    What can happen if there is a failure in the water pump for the 1987 Oldsmobile Cutlass? Posted by Customer
    A:
    A failure in the water pump can cause serious engine damage due to overheating as the pump will not be able to circulate cooled water through the engine.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Water Pump
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 12462265, the Right Choice

To ensure reliability, purchase GM part # 12462265 Engine Coolant Pump Kit. It is sometimes referred to as Oldsmobile Water Pump. Directly from GM, genuine parts are superb with regards to quality, longevity, and fit. Every single part passed stringent quality testing, so you can be sure that it's safe, durable, and built to perform like your original parts. This part fits specific Oldsmobile Cutlass, Firenza models.

GMPartsGiant.com is a leading supplier of genuine GM parts and accessories such as GM 12462265 Engine Coolant Pump Kit. You're certainly in the right place if you're searching for the great cost-effective OEM GM parts. Look no further than our vast inventory of genuine GM parts offered at unbeatable online prices, all of which are backed by the manufacturer's warranty. Not to forget, our hassle-free return policy and quick delivery service ensure a smooth shopping experience for you. For detailed Oldsmobile parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly