Make sure this part fits

Oldsmobile 19303838 Knuckle Steering

1997-2001 Oldsmobile Bravada

Customer Questions & Expert Answers (9)
GM 19303838 Knuckle Steering
  • Part Description
    Knuckle,Steering
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Oldsmobile
    Manufacturer Part Number19303838
    Part DescriptionKnuckle,Steering
    Item Dimensions13.4 x 12.9 x 5.6 inches
    Item Weight12.30 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU19303838
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    1997-2001 Oldsmobile Bravada6 Cyl 4.3LBRAVADA
  • Customer Questions & Expert Answers

    Q:
    I am wonder if this is complete and correct part for my vehicle. Posted by GMPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 19303838 fits your vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    How do you remove the Steering Knuckle of 2WD Chevrolet Blazer,S10,GMC Jimmy and Sonoma? Posted by Customer
    A:
    To remove the front suspension of a vehicle, start by raising the front of the vehicle and supporting it securely on jack stands. Apply the parking brake for safety. Then, support the lower control arm with a jack to compress the coil spring to its normal ride height. Remove the wheel and disconnect the ABS wheel speed sensor. Next, remove the brake caliper and the brake disc/hub assembly. If equipped, remove the disc splash shield. Disconnect the tie-rod end from the knuckle and disconnect the ball joints from the steering knuckle. Finally, remove the steering knuckle. To install the front suspension, simply reverse the removal steps. Make sure to adjust the front wheel bearings and have the front wheel alignment checked afterwards.
    Posted by GMPartsGiant Specialist
    Q:
    How do you remove the front suspension of the 2000 Chevrolet Blazer? Posted by Customer
    A:
    Start by raising the front of the vehicle and supporting it securely on jack stands. Apply the parking brake for safety.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Steering Knuckle
    Q:
    How can you remove the driveaxle from the hub for the 1995 Chevrolet Blazer? Posted by Customer
    A:
    Use a puller to push the driveaxle out of the hub while withdrawing the steering knuckle and hub assembly.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Steering Knuckle
    Q:
    How do you start the process of removing 2000 Chevrolet S10 driveaxle/hub? Posted by Customer
    A:
    Put the vehicle in gear, apply the parking brake, and break loose the driveaxle/hub nut with a socket and large breaker bar.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Steering Knuckle
    Q:
    What should you inspect and potentially replace during the process for the 2001 GMC Jimmy? Posted by Customer
    A:
    Inspect the seal on the rear side of the knuckle and replace it if necessary by driving in a new seal with a socket that has a slightly smaller outside diameter.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Steering Knuckle
    Q:
    What should you do after removing the brake caliper, brake disc/hub assembly, and disc splash shield for the 1999 GMC Jimmy? Posted by Customer
    A:
    Disconnect the tie-rod end from the knuckle and disconnect the ball joints from the steering knuckle.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Steering Knuckle
    Q:
    What should you inspect and potentially replace during the process of the 1996 GMC Sonoma? Posted by Customer
    A:
    Inspect the seal on the rear side of the knuckle and replace it if necessary by driving in a new seal with a socket that has a slightly smaller outside diameter.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Steering Knuckle
    Q:
    How do you install the front suspension of the 1994 GMC Sonoma? Posted by Customer
    A:
    To install the front suspension, simply reverse the removal steps. Make sure to adjust the front wheel bearings and have the front wheel alignment checked afterwards.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Steering Knuckle
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 19303838, the Right Choice

To ensure reliability, purchase GM part # 19303838 Knuckle Steering. It is sometimes referred to as Oldsmobile Steering Knuckle. Directly from GM, genuine parts are superb with regards to quality, longevity, and fit. Every single part passed stringent quality testing, so you can be sure that it's safe, durable, and built to perform like your original parts. This part fits specific Oldsmobile Bravada models.

GMPartsGiant.com is a leading supplier of genuine GM parts and accessories such as GM 19303838 Knuckle Steering. You're certainly in the right place if you're searching for the great cost-effective OEM GM parts. Look no further than our vast inventory of genuine GM parts offered at unbeatable online prices, all of which are backed by the manufacturer's warranty. Not to forget, our hassle-free return policy and quick delivery service ensure a smooth shopping experience for you. For detailed Oldsmobile parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly