Make sure this part fits

Oldsmobile 20151254 Arm Asm * Black Finish

1982-1988 Oldsmobile Cutlass

Customer Questions & Expert Answers (8)
GM 20151254 Arm Asm * Black Finish
  • Part Description
    ARM, Windshield Wiper Arm
  • Replaces
    20009417
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Oldsmobile
    Manufacturer Part Number20151254
    Part DescriptionARM, Windshield Wiper Arm
    Other NamesWiper Arm
    Item Dimensions23.4 x 2.2 x 1.0 inches
    Item Weight0.70 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces20009417
    ManufacturerGeneral Motors
    SKU20151254
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    1982-1988 Oldsmobile Cutlass4 Cyl 2.5L, 6 Cyl 2.8L, 6 Cyl 3.0L, 6 Cyl 3.8L, 6 Cyl 4.3L Diesel, 8 Cyl 4.3L, 8 Cyl 5.0L, 8 Cyl 5.7L Diesel2 DOOR, 4 DOOR, BROUGHAM 2 DOOR, BROUGHAM 4 DOOR, CUTLASS CALAIS, CUTLASS CRUISER
  • Customer Questions & Expert Answers

    Q:
    I would like to confirm if this is the correct part number for my vehicle. Please advise. Thank you. Posted by GMPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 20151254 fits your vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    How to remove and install rear wiper arms? Posted by Customer
    A:
    Removal of the wiper arms requires the use of special tool, GM J-8966 or equivalent pry tool. Lift the wiper arm from the window, then insert the tool under the wiper arm. Lever the arm off the transmission drive shaft. Use care not to damage the paint on the vehicle. Remove the wiper blade from the arm. To install, install the wiper blade onto the arm, position the wiper arm on the wiper motor drive shaft so that the blade assembly rests in the proper park position, and press down on the wiper arm until it is fully seated on the drive shaft. The same special tool for removal can be used for installation.
    Posted by GMPartsGiant Specialist
    Q:
    What are some examples of different types of wiper refills and how can they be removed for the 1985 Buick Regal? Posted by Customer
    A:
    Anco® refills have a release button, Trico® refills can be removed by pressing down on the metal backing strip, other Trico® refills have two metal tabs that need to be squeezed together, polycarbonate refills have a locking device, and Tridon® refills require removing the wiper blade by twisting counterclockwise.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Windshield Wiper
    Q:
    How do you remove the wiper arms of the 1983 Buick Regal? Posted by Customer
    A:
    Insert the tool or a screwdriver under the wiper arm and pry the arm off the shaft, being careful not to scratch the paint. Disconnect the washer hose from the arm (if so equipped) and remove the arm.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Windshield Wiper
    Q:
    How do you install the wiper arms of the 1990 Buick Regal? Posted by Customer
    A:
    Position the arm over the shaft and press down, making sure to install the arms in the same position on the windshield as they were when they were removed.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Wiper Arm
    Q:
    How do you remove the left-hand control panel from the 1997 Oldsmobile Cutlass? Posted by Customer
    A:
    Start by disconnecting the negative battery cable and removing the instrument cluster trim panel. Then, remove the switch from the rear by taking out the 2 mounting screws.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Windshield Wiper
    Q:
    How many types of windshield wiper assemblies are there of the 1997 Oldsmobile Cutlass? Posted by Customer
    A:
    There are two types of windshield wiper assemblies depending on the vehicle model.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Windshield Wiper
    Q:
    What tool can be used to remove the wiper arm from the shaft of the 1983 Oldsmobile Cutlass? Posted by Customer
    A:
    A suitable hooked tool or a small screwdriver can be used.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Wiper Arm
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 20151254, the Right Choice

To ensure reliability, purchase GM part # 20151254 Arm Asm * Black Finish. It is sometimes referred to as Oldsmobile Windshield Wiper, Oldsmobile Wiper Arm. Directly from GM, genuine parts are superb with regards to quality, longevity, and fit. Every single part passed stringent quality testing, so you can be sure that it's safe, durable, and built to perform like your original parts. This part fits specific Oldsmobile Cutlass models.

GMPartsGiant.com is a leading supplier of genuine GM parts and accessories such as GM 20151254 Arm Asm * Black Finish. You're certainly in the right place if you're searching for the great cost-effective OEM GM parts. Look no further than our vast inventory of genuine GM parts offered at unbeatable online prices, all of which are backed by the manufacturer's warranty. Not to forget, our hassle-free return policy and quick delivery service ensure a smooth shopping experience for you. For detailed Oldsmobile parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly