Make sure this part fits

Hummer 11515767 Bolt,Trans Brace Bracket

2003-2010 Hummer

Customer Questions & Expert Answers (16)
GM 11515767 Bolt,Trans Brace Bracket
  • Part Description
    Standard Parts
  • Replaces
    11508556, 11518625, 11515826, 12557011
  • Manufacturer
    General Motors
Make sure this part fits
$0.79 MSRP: $1.22
You Save: $0.43 (36%)
Ships in 1-3 Business Days
10
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Hummer
    Manufacturer Part Number11515767
    Part DescriptionStandard Parts
    Item Dimensions6.0 x 4.5 x 1.1 inches
    Item Weight1.00 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces11508556, 11518625, 11515826, 12557011
    ManufacturerGeneral Motors
    SKU11515767
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2003-2009 Hummer H28 Cyl 6.0L, 8 Cyl 6.2L, 8 Cyl 6.2L FlexH2 HUMMER, PICKUP, SUV
    2006-2010 Hummer H35 Cyl 3.5L, 5 Cyl 3.7L, 8 Cyl 5.3LCREW CAB, SUV
    2009-2010 Hummer H3T5 Cyl 3.7L, 8 Cyl 5.3LCREW CAB, SUV
  • Customer Questions & Expert Answers

    Q:
    I am wonder if this is complete and correct part for my vehicle. Posted by GMPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 11515767 fits your vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    How do you replace front and rear wheel studs on Pontiac Grand Prix? Posted by Customer
    A:
    These procedures apply to both, the front and rear wheel studs. One should start by fitting a lug nut slightly on the stud that is to be replaced. There exist a special tool which one has to use to push the stud out of the hub flange. Subsequently, in the hub flange end, position the new stud from the back and subsequently place four flat washers in combination with lug nut and till it tightens to ease in the stud into the flute. On going, secure the nut further until the stud is flush with the flange. Last of all, remake the hub and the bearing assembly.
    Posted by GMPartsGiant Specialist
    Q:
    How do you remove a stud from the hub flange for the 2004 Cadillac DeVille? Posted by Customer
    A:
    Partially install a lug nut onto the stud that needs to be replaced. Then, use a press tool to push the stud out of the hub flange.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Wheel Hub Bolt
    Q:
    How do you remove the brake disc of the 2008 Cadillac DTS? Posted by Customer
    A:
    Start by removing it from the hub.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Wheel Hub Bolt
    Q:
    What steps should be taken after installing the new stud for the 2004 Buick Rainier? Posted by Customer
    A:
    Next, reinstall the brake disc and caliper, followed by the wheel and lug nuts.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Wheel Hub Bolt
    Q:
    What should you do to ensure the new stud is properly seated for the 2016 Cadillac Escalade? Posted by Customer
    A:
    Tighten the lug nut until the stud is seated in the flange.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Wheel Hub Bolt
    Q:
    How can the stud be removed from the hub flange for the 2008 Chevrolet Avalanche? Posted by Customer
    A:
    The stud can be pushed out of the hub flange using a press tool.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Wheel Hub Bolt
    Q:
    What is the first step in the procedure for the 1992 Chevrolet Beretta? Posted by Customer
    A:
    Begin by removing the hub and wheel bearing assembly.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Wheel Hub Bolt
    Q:
    How do you remove the old wheel stud for the 2012 Chevrolet Colorado? Posted by Customer
    A:
    Use a small press tool to push the stud out of the hub flange.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Wheel Hub Bolt
    Q:
    How should the lug nut be tightened during stud installation for the 2009 Chevrolet Silverado? Posted by Customer
    A:
    The lug nut should be tightened until the stud is seated in the flange.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Wheel Hub Bolt
    Q:
    What needs to be removed after raising for the 2013 Chevrolet Tahoe? Posted by Customer
    A:
    After raising the vehicle, the wheel and brake disc or drum need to be removed.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Wheel Hub Bolt
    Q:
    What is the final step in the process for the 2008 GMC Sierra? Posted by Customer
    A:
    The final step is to lower the vehicle and tighten the lug nuts to the torque specifications.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Wheel Hub Bolt
    Q:
    How can a new stud be installed for the 2010 Chevrolet Suburban? Posted by Customer
    A:
    To install a new stud, it should be inserted into the hub flange from the back side. Then, flat washers and a lug nut should be installed on the stud.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Wheel Hub Bolt
    Q:
    What should you do to ensure the new stud is properly seated for the 2004 GMC Canyon? Posted by Customer
    A:
    Tighten the lug nut until the stud is seated in the flange.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Wheel Hub Bolt
    Q:
    What is the process for installing a new stud for the 2006 Chevrolet Trailblazer? Posted by Customer
    A:
    For installation, insert the new stud into the hub flange from the back side and secure it in place by installing flat washers and a lug nut on the stud. Tighten the lug nut until the stud is seated in the flange.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Wheel Hub Bolt
    Q:
    How can a new stud be installed for the 2008 GMC Yukon? Posted by Customer
    A:
    To install a new stud, it should be inserted into the hub flange from the back side. Then, flat washers and a lug nut should be installed on the stud.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Wheel Hub Bolt
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 11515767, the Right Choice

To ensure reliability, purchase GM part # 11515767 Bolt,Trans Brace Bracket. It is sometimes referred to as Hummer Control Arm Bolt, Hummer Wheel Hub Bolt. Directly from GM, genuine parts are superb with regards to quality, longevity, and fit. Every single part passed stringent quality testing, so you can be sure that it's safe, durable, and built to perform like your original parts. This part fits specific Hummer H2, H3, H3T models.

GMPartsGiant.com is a leading supplier of genuine GM parts and accessories such as GM 11515767 Bolt,Trans Brace Bracket. You're certainly in the right place if you're searching for the great cost-effective OEM GM parts. Look no further than our vast inventory of genuine GM parts offered at unbeatable online prices, all of which are backed by the manufacturer's warranty. Not to forget, our hassle-free return policy and quick delivery service ensure a smooth shopping experience for you. For detailed Hummer parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly