Make sure this part fits

GMC 26034184 Front Drive Axle Inner Shaft Kit

1992-1999 GMC

Customer Questions & Expert Answers (17)
GM 26034184 Front Drive Axle Inner Shaft Kit
  • Part Description
    Shaft Kit,Front Drive Axle Inner
  • Position
    Front Inner
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GMC
    Manufacturer Part Number26034184
    Part DescriptionShaft Kit,Front Drive Axle Inner
    Other NamesStub Shaft
    Item Dimensions18.1 x 6.4 x 6.8 inches
    Item Weight7.80 Pounds
    PositionFront Inner
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU26034184
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    1992-1999 GMC Jimmy6 Cyl 4.3L2 DOOR, 4 DOOR
    1995-1999 GMC Sonoma4 Cyl 2.2L, 6 Cyl 4.3LPICKUP
    1992-1993 GMC Typhoon6 Cyl 4.3L4 DOOR
  • Customer Questions & Expert Answers

    Q:
    I would like to confirm if this is the correct part number for my vehicle. Please advise. Thank you. Posted by GMPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 26034184 fits your vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    How are the axle shafts connected to the differential in the rear axle assembly for the 2002 Chevrolet Blazer? Posted by Customer
    A:
    The axle shafts are splined to the differential side gears, causing the inner tire to turn more slowly than the outer tire during cornering. The differential pinion gears roll around the slower side gear, driving the outer side gear and tire more quickly.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How do you remove the pinion shaft for conventional differentials for the 1996 Chevrolet Blazer? Posted by Customer
    A:
    To remove the pinion shaft for conventional differentials, remove the lock bolt and pull out the pinion shaft.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should you do with the spring U-bolts for the 1999 Chevrolet Blazer? Posted by Customer
    A:
    Disconnect the spring U-bolts.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How can you release the driveaxles in the 1998 Chevrolet Blazer? Posted by Customer
    A:
    Hit the inner part of the tri-pot housing with a hammer and a piece of wood until the snap-ring releases.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What may be required for overhauling the differential, and why may it not be cost-effective for a do-it-yourselfer for the 1999 GMC Jimmy? Posted by Customer
    A:
    Overhauling the differential may require special tools, and it is not typically cost-effective for a do-it-yourselfer. Professional expertise and equipment are often needed for this type of work.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should you do before removing the driveaxle flange bolts for the 2001 GMC Jimmy? Posted by Customer
    A:
    Mark the relationship of the inner CV joint to the flange.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should you do with the spring U-bolts for the 2000 Chevrolet S10? Posted by Customer
    A:
    Disconnect the spring U-bolts.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How should the axleshafts be installed back into the differential during reassembly for the 2004 Chevrolet S10? Posted by Customer
    A:
    Carefully insert the axleshaft into the housing and seat it securely in the differential.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What tool can be used to hold the driveaxle while breaking loose the driveaxle hub nut for the 1999 Chevrolet S10? Posted by Customer
    A:
    A prybar or large screwdriver can be used to hold the driveaxle.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should you do after disconnecting the U-bolts for the 2001 GMC Jimmy? Posted by Customer
    A:
    Remove the spacers and clamp plates.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How do you remove the pinion shaft for conventional differentials for the 2000 GMC Jimmy? Posted by Customer
    A:
    To remove the pinion shaft for conventional differentials, remove the lock bolt and pull out the pinion shaft.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What is the housing of the differential called, and how are the axle tubes attached to it for the 1997 Chevrolet S10? Posted by Customer
    A:
    The differential is housed within a casting known as the "carrier," which has a pressed steel cover. The steel axle tubes are pressed into and welded to the carrier.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How do you remove the pinion shaft for locking differentials for the 1995 GMC Sonoma? Posted by Customer
    A:
    For locking differentials, rotate the differential for access and support the pinion shaft to prevent it from falling into the case. Remove the lock bolt and withdraw the pinion shaft part-way.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How are the axle shafts connected to the differential in the rear axle assembly for the 1996 GMC Sonoma? Posted by Customer
    A:
    The axle shafts are splined to the differential side gears, causing the inner tire to turn more slowly than the outer tire during cornering. The differential pinion gears roll around the slower side gear, driving the outer side gear and tire more quickly.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What final step should you take for the 2001 GMC Sonoma? Posted by Customer
    A:
    Bleed the brakes.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How do you break loose the driveaxle hub nut for the 1997 GMC Sonoma? Posted by Customer
    A:
    Use a large breaker bar to break loose the driveaxle hub nut.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 26034184, the Right Choice

To ensure reliability, purchase GM part # 26034184 Front Drive Axle Inner Shaft Kit. It is sometimes referred to as GMC Axle Shaft. Directly from GM, genuine parts are superb with regards to quality, longevity, and fit. Every single part passed stringent quality testing, so you can be sure that it's safe, durable, and built to perform like your original parts. This part fits specific GMC Jimmy, Sonoma, Typhoon models.

GMPartsGiant.com is a leading supplier of genuine GM parts and accessories such as GM 26034184 Front Drive Axle Inner Shaft Kit. You're certainly in the right place if you're searching for the great cost-effective OEM GM parts. Look no further than our vast inventory of genuine GM parts offered at unbeatable online prices, all of which are backed by the manufacturer's warranty. Not to forget, our hassle-free return policy and quick delivery service ensure a smooth shopping experience for you. For detailed GMC parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly