Make sure this part fits

GMC 26032311 Front Wheel Drive Shaft Kit

1992-1995 GMC

Customer Questions & Expert Answers (17)
GM 26032311 Front Wheel Drive Shaft Kit
  • Part Description
    Shaft Kit,Front Wheel Drive ; Shaft Kit, Front Axle
  • Position
    Front
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GMC
    Manufacturer Part Number26032311
    Part DescriptionShaft Kit,Front Wheel Drive ; Shaft Kit, Front Axle
    Item Dimensions26.5 x 6.9 x 7.6 inches
    Item Weight20.00 Pounds
    PositionFront
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU26032311
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    1992-1995 GMC Jimmy6 Cyl 4.3L2 DOOR, 4 DOOR
    1995 GMC Sonoma4 Cyl 2.2L, 6 Cyl 4.3LPICKUP
    1992-1993 GMC Typhoon6 Cyl 4.3L4 DOOR
  • Customer Questions & Expert Answers

    Q:
    I would like to confirm if this is the correct part number for my vehicle. Please advise. Thank you. Posted by GMPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 26032311 fits your vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    How do you remove the pinion shaft for locking differentials for the 1995 Chevrolet Blazer? Posted by Customer
    A:
    For locking differentials, rotate the differential for access and support the pinion shaft to prevent it from falling into the case. Remove the lock bolt and withdraw the pinion shaft part-way.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should you do before removing the driveaxle flange bolts for the 2002 Chevrolet Blazer? Posted by Customer
    A:
    Mark the relationship of the inner CV joint to the flange.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What additional steps should you take if applicable for the 2004 Chevrolet Blazer? Posted by Customer
    A:
    If applicable, disconnect the vent hose and brake hose.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should be considered before assuming an axle problem, and why for the 1997 Chevrolet Blazer? Posted by Customer
    A:
    Before assuming the axle is the problem, it is important to check for other possible causes. Road noise, tire noise, and engine and transmission noise can be mistaken for axle issues.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What is the housing of the differential called, and how are the axle tubes attached to it for the 1997 GMC Jimmy? Posted by Customer
    A:
    The differential is housed within a casting known as the "carrier," which has a pressed steel cover. The steel axle tubes are pressed into and welded to the carrier.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How do you break loose the driveaxle hub nut for the 1994 Chevrolet S10? Posted by Customer
    A:
    Use a large breaker bar to break loose the driveaxle hub nut.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What are the final steps for reassembling the rear differential after installing the axleshafts and pinion shaft for the 2000 GMC Jimmy? Posted by Customer
    A:
    Finally, install the differential cover and fill it with the specified lubricant. Install the brake drums and wheels, and lower the vehicle.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How can you release the driveaxles in the 1995 GMC Jimmy? Posted by Customer
    A:
    Hit the inner part of the tri-pot housing with a hammer and a piece of wood until the snap-ring releases.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How do you install the rear axle assembly for the 2001 Chevrolet S10? Posted by Customer
    A:
    Reverse the removal steps and make sure to lower the vehicle weight onto the wheels before tightening the U-bolt nuts completely.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What are the initial steps for removing the rear differential for the 2000 Chevrolet S10? Posted by Customer
    A:
    The initial steps for removing the rear differential are as follows: Raise the rear of the vehicle and support it securely on jackstands. Remove the wheel and brake drum. For vehicles with a locking differential, remove both rear wheels and brake drums.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What may be required for overhauling the differential, and why may it not be cost-effective for a do-it-yourselfer for the 1996 Chevrolet S10? Posted by Customer
    A:
    Overhauling the differential may require special tools, and it is not typically cost-effective for a do-it-yourselfer. Professional expertise and equipment are often needed for this type of work.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should you do after disconnecting the U-bolts for the 1999 GMC Jimmy? Posted by Customer
    A:
    Remove the spacers and clamp plates.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How can you release the driveaxles in the 1997 GMC Sonoma? Posted by Customer
    A:
    Hit the inner part of the tri-pot housing with a hammer and a piece of wood until the snap-ring releases.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How do you remove the C-locks and axleshafts for locking differentials for the 2000 GMC Sonoma? Posted by Customer
    A:
    Rotate the differential until the pinion shaft touches the case, providing enough clearance for access to the C-locks. Use a screwdriver to rotate the C-lock until the open endpoints align, then push the axleshaft in and remove the C-lock. Repeat this process for the opposite axleshaft.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What type of front axle assembly is used in the 1997 GMC Sonoma, and how does it function? Posted by Customer
    A:
    4WD models use a fully independent front axle assembly consisting of a differential and a pair of drive axles with inner and outer constant velocity (CV) joints. An extension axleshaft is employed on the right side to compensate for the distance difference between the differential and the right front wheel.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should you do after raising the 1999 GMC Sonoma? Posted by Customer
    A:
    Remove the rear wheels and position a jack under the rear axle differential case.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 26032311, the Right Choice

To ensure reliability, purchase GM part # 26032311 Front Wheel Drive Shaft Kit. It is sometimes referred to as GMC Axle Shaft. Directly from GM, genuine parts are superb with regards to quality, longevity, and fit. Every single part passed stringent quality testing, so you can be sure that it's safe, durable, and built to perform like your original parts. This part fits specific GMC Jimmy, Sonoma, Typhoon models.

GMPartsGiant.com is a leading supplier of genuine GM parts and accessories such as GM 26032311 Front Wheel Drive Shaft Kit. You're certainly in the right place if you're searching for the great cost-effective OEM GM parts. Look no further than our vast inventory of genuine GM parts offered at unbeatable online prices, all of which are backed by the manufacturer's warranty. Not to forget, our hassle-free return policy and quick delivery service ensure a smooth shopping experience for you. For detailed GMC parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly