GM 21019659 Solenoid Asm,Automatic Transmission Shift Lock Control

You can Select Your Vehicle to check if 21019659 fits your vehicle.

To remove the shift lever assembly, it is necessary to remove the center console, and then to separate the end of the shift cable from the pin of the assembly and to disconnect the electric wires if any. Next, the four mounting bolts are to be undone and the assembly pulled out, only in case of a replacement, some parts from the assembly may be transferred, the process of installation is vice versa of its removal. In the case of shift interlock solenoid, one may find it easier to take out the shift lever assembly out of the way first. One should firstly cut off the cable on the negative terminal of the battery next, remove the center console and then remove the electrical connector on the shift lever assembly. To remove the solenoid categorically employ a fine pick to cut off the solenoid wire terminal using pliers from the connector, and then eliminate the rivet of the solenoid with the help of the 5/32-inch drill. After the solenoid is loose, disconnect the linkage and push it as far up as the assembling towards the dash for it to be taken off. Restalls also works in the same way as before to reinstall, should be guide the solenoid wire and terminal through the assembly, reattach the solenoid using the rivet gun and finally reconnect the battery.

After removing the center console, detach the shift cable end from the pin on the assembly and disconnect any electrical connectors.