Make sure this part fits

GM 26055052 Front Wheel Drive Shaft Kit

1997-2005 GM

Customer Questions & Expert Answers (17)
GM 26055052 Front Wheel Drive Shaft Kit
  • Part Description
    Shaft Kit,Front Wheel Drive
  • Position
    Front
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number26055052
    Part DescriptionShaft Kit,Front Wheel Drive
    Other NamesAxle Assembly, Output Shaft
    Item Dimensions29.6 x 5.8 x 5.6 inches
    Item Weight19.40 Pounds
    PositionFront
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU26055052
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    1997-2005 Chevrolet Blazer6 Cyl 4.3L2 DOOR, 4 DOOR
    1997-2004 Chevrolet S104 Cyl 2.2L, 4 Cyl 2.2L Flex, 6 Cyl 4.3LCREW CAB, PICKUP, PICKUP EXTENDED CAB
    1997-2001 GMC Jimmy6 Cyl 4.3L2 DOOR, 4 DOOR
    1997-2004 GMC Sonoma4 Cyl 2.2L, 4 Cyl 2.2L Flex, 6 Cyl 4.3L4 DOOR, PICKUP, PICKUP EXTENDED CAB
    1997-2001 Oldsmobile Bravada6 Cyl 4.3LBRAVADA
  • Customer Questions & Expert Answers

    Q:
    I would like to confirm if this is the correct part number for my vehicle. Please advise. Thank you. Posted by GMPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 26055052 fits your vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    What are the steps for reinstalling the C-locks and pinion shaft for locking differentials for the 1997 Chevrolet Blazer? Posted by Customer
    A:
    For locking differentials, install the C-locks with the pinion shaft partially withdrawn, ensuring they are positioned correctly. Withdraw the axleshaft carefully until the C-lock clears the thrust block. Once the C-locks are installed, push the pinion shaft into place with the groove lined up with the lock bolt hole, then install the lock bolt.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How are the axle shafts connected to the differential in the rear axle assembly for the 2004 Chevrolet Blazer? Posted by Customer
    A:
    The axle shafts are splined to the differential side gears, causing the inner tire to turn more slowly than the outer tire during cornering. The differential pinion gears roll around the slower side gear, driving the outer side gear and tire more quickly.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should you do after breaking loose the driveaxle hub nut for the 1998 Chevrolet Blazer? Posted by Customer
    A:
    Remove the nut and washer.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should you do with the driveshaft for the 2002 Chevrolet Blazer? Posted by Customer
    A:
    Disconnect the driveshaft and secure it out of the way.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How are the driveaxles retained in the 1995 GMC Jimmy? Posted by Customer
    A:
    The driveaxles are retained by snap rings at the inner end of the tri-pot joints.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should be considered before assuming an axle problem, and why for the 1997 Chevrolet S10? Posted by Customer
    A:
    Before assuming the axle is the problem, it is important to check for other possible causes. Road noise, tire noise, and engine and transmission noise can be mistaken for axle issues.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should you do with the driveshaft for the 2002 Chevrolet S10? Posted by Customer
    A:
    Disconnect the driveshaft and secure it out of the way.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How are the axle shafts connected to the differential in the rear axle assembly for the 1997 GMC Jimmy? Posted by Customer
    A:
    The axle shafts are splined to the differential side gears, causing the inner tire to turn more slowly than the outer tire during cornering. The differential pinion gears roll around the slower side gear, driving the outer side gear and tire more quickly.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How should the axleshafts be installed back into the differential during reassembly for the 2000 GMC Jimmy? Posted by Customer
    A:
    Carefully insert the axleshaft into the housing and seat it securely in the differential.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How do you break loose the driveaxle hub nut for the 2001 Chevrolet S10? Posted by Customer
    A:
    Use a large breaker bar to break loose the driveaxle hub nut.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How do you remove the C-locks and axleshafts for locking differentials for the 2000 Chevrolet S10? Posted by Customer
    A:
    Rotate the differential until the pinion shaft touches the case, providing enough clearance for access to the C-locks. Use a screwdriver to rotate the C-lock until the open endpoints align, then push the axleshaft in and remove the C-lock. Repeat this process for the opposite axleshaft.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What additional steps should you take if applicable for the 1996 GMC Jimmy? Posted by Customer
    A:
    If applicable, disconnect the vent hose and brake hose.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How do you remove the pinion shaft for locking differentials for the 1998 GMC Sonoma? Posted by Customer
    A:
    For locking differentials, rotate the differential for access and support the pinion shaft to prevent it from falling into the case. Remove the lock bolt and withdraw the pinion shaft part-way.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should you remove before removing the driveaxle assembly for the 1994 GMC Sonoma? Posted by Customer
    A:
    Remove the steering knuckle.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What is the purpose of the optional locking limited-slip rear axle, and how does it work for the 1995 GMC Sonoma? Posted by Customer
    A:
    The optional locking limited-slip rear axle allows for normal operation until one wheel loses traction. This differential includes a pair of clutch "cones" that slow the rotation of the differential case when one wheel is on a firm surface and the other on a slippery one, equalizing the rotation speed of the axleshaft driving the wheel with traction.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How do you start removing the rear axle assembly for the 1997 GMC Sonoma? Posted by Customer
    A:
    Start by loosening the rear wheel lug nuts and raising the rear of the vehicle with jackstands placed under the frame.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 26055052, the Right Choice

To ensure reliability, purchase GM part # 26055052 Front Wheel Drive Shaft Kit. It is sometimes referred to as GM Axle Shaft. Directly from GM, genuine parts are superb with regards to quality, longevity, and fit. Every single part passed stringent quality testing, so you can be sure that it's safe, durable, and built to perform like your original parts. This part fits specific Chevrolet Blazer, S10 models. It fits GMC Jimmy, Sonoma. It also fits Oldsmobile Bravada.

GMPartsGiant.com is a leading supplier of genuine GM parts and accessories such as GM 26055052 Front Wheel Drive Shaft Kit. You're certainly in the right place if you're searching for the great cost-effective OEM GM parts. Look no further than our vast inventory of genuine GM parts offered at unbeatable online prices, all of which are backed by the manufacturer's warranty. Not to forget, our hassle-free return policy and quick delivery service ensure a smooth shopping experience for you. For detailed GMC parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly