Make sure this part fits

GM 26034185 Shaft Kit,Front Drive Axle Inner

1983-1999 GM

Customer Questions & Expert Answers (17)
GM 26034185 Shaft Kit,Front Drive Axle Inner
  • Part Description
    SHAFT KIT, Front Axle
  • Position
    Front Inner
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number26034185
    Part DescriptionSHAFT KIT, Front Axle
    Other NamesAxle Shaft, Inner Joint Assembly, Output Shaft
    Item Dimensions16.9 x 6.4 x 6.4 inches
    Item Weight7.00 Pounds
    PositionFront Inner
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU26034185
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    1995-1999 Chevrolet Blazer6 Cyl 4.3L2 DOOR, 4 DOOR
    1983-1999 Chevrolet S104 Cyl 1.9L, 4 Cyl 2.0L, 4 Cyl 2.2L, 4 Cyl 2.2L Diesel, 4 Cyl 2.5L, 6 Cyl 2.8L, 6 Cyl 4.3L2 DOOR, 4 DOOR, PICKUP
    1992-1999 GMC Jimmy6 Cyl 4.3L2 DOOR, 4 DOOR
    1983-1991 GMC S154 Cyl 1.9L, 4 Cyl 2.0L, 4 Cyl 2.2L Diesel, 4 Cyl 2.5L, 6 Cyl 2.8L, 6 Cyl 4.3L2 DOOR, 4 DOOR, PICKUP
    1991-1999 GMC Sonoma4 Cyl 2.2L, 4 Cyl 2.5L, 6 Cyl 2.8L, 6 Cyl 4.3LPICKUP
    1991 GMC Syclone6 Cyl 4.3LPICKUP
    1992-1993 GMC Typhoon6 Cyl 4.3L2 DOOR, 4 DOOR
  • Customer Questions & Expert Answers

    Q:
    I would like to confirm if this is the correct part number for my vehicle. Please advise. Thank you. Posted by GMPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 26034185 fits your vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    What are the initial steps for removing the rear differential for the 2004 Chevrolet Blazer? Posted by Customer
    A:
    The initial steps for removing the rear differential are as follows: Raise the rear of the vehicle and support it securely on jackstands. Remove the wheel and brake drum. For vehicles with a locking differential, remove both rear wheels and brake drums.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How do you start removing the rear axle assembly for the 2003 Chevrolet Blazer? Posted by Customer
    A:
    Start by loosening the rear wheel lug nuts and raising the rear of the vehicle with jackstands placed under the frame.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What is the housing of the differential called, and how are the axle tubes attached to it for the 2000 Chevrolet Blazer? Posted by Customer
    A:
    The differential is housed within a casting known as the "carrier," which has a pressed steel cover. The steel axle tubes are pressed into and welded to the carrier.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How do you install the driveaxle for the 1998 Chevrolet Blazer? Posted by Customer
    A:
    Simply reverse the removal steps, making sure to tighten the driveaxle hub nut and CV joint flange bolts to the specified torque.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What are the steps for reinstalling the C-locks and pinion shaft for locking differentials for the 2000 GMC Jimmy? Posted by Customer
    A:
    For locking differentials, install the C-locks with the pinion shaft partially withdrawn, ensuring they are positioned correctly. Withdraw the axleshaft carefully until the C-lock clears the thrust block. Once the C-locks are installed, push the pinion shaft into place with the groove lined up with the lock bolt hole, then install the lock bolt.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How do you remove the C-locks and axleshafts for locking differentials for the 1994 Chevrolet S10? Posted by Customer
    A:
    Rotate the differential until the pinion shaft touches the case, providing enough clearance for access to the C-locks. Use a screwdriver to rotate the C-lock until the open endpoints align, then push the axleshaft in and remove the C-lock. Repeat this process for the opposite axleshaft.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should be considered before assuming an axle problem, and why for the 1999 GMC Jimmy? Posted by Customer
    A:
    Before assuming the axle is the problem, it is important to check for other possible causes. Road noise, tire noise, and engine and transmission noise can be mistaken for axle issues.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How do you install the rear axle assembly for the 1994 Chevrolet S10? Posted by Customer
    A:
    Reverse the removal steps and make sure to lower the vehicle weight onto the wheels before tightening the U-bolt nuts completely.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How do you break loose the driveaxle hub nut for the 1995 Chevrolet S10? Posted by Customer
    A:
    Use a large breaker bar to break loose the driveaxle hub nut.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should you do with the driveshaft for the 1996 GMC Jimmy? Posted by Customer
    A:
    Disconnect the driveshaft and secure it out of the way.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How do you install the driveaxle for the 2000 GMC Jimmy? Posted by Customer
    A:
    Simply reverse the removal steps, making sure to tighten the driveaxle hub nut and CV joint flange bolts to the specified torque.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What may be required for overhauling the differential, and why may it not be cost-effective for a do-it-yourselfer for the 1997 Chevrolet S10? Posted by Customer
    A:
    Overhauling the differential may require special tools, and it is not typically cost-effective for a do-it-yourselfer. Professional expertise and equipment are often needed for this type of work.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How do you break loose the driveaxle hub nut for the 2000 GMC Sonoma? Posted by Customer
    A:
    Use a large breaker bar to break loose the driveaxle hub nut.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How are the axle shafts connected to the differential in the rear axle assembly for the 1994 GMC Sonoma? Posted by Customer
    A:
    The axle shafts are splined to the differential side gears, causing the inner tire to turn more slowly than the outer tire during cornering. The differential pinion gears roll around the slower side gear, driving the outer side gear and tire more quickly.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How do you remove the pinion shaft for locking differentials for the 1997 GMC Sonoma? Posted by Customer
    A:
    For locking differentials, rotate the differential for access and support the pinion shaft to prevent it from falling into the case. Remove the lock bolt and withdraw the pinion shaft part-way.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should you do with the driveshaft for the 1998 GMC Sonoma? Posted by Customer
    A:
    Disconnect the driveshaft and secure it out of the way.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 26034185, the Right Choice

To ensure reliability, purchase GM part # 26034185 Shaft Kit,Front Drive Axle Inner. It is sometimes referred to as GM Axle Shaft. Directly from GM, genuine parts are superb with regards to quality, longevity, and fit. Every single part passed stringent quality testing, so you can be sure that it's safe, durable, and built to perform like your original parts. This part fits specific Chevrolet Blazer, S10 models. It fits GMC Jimmy, S15, Sonoma.

GMPartsGiant.com is a leading supplier of genuine GM parts and accessories such as GM 26034185 Shaft Kit,Front Drive Axle Inner. You're certainly in the right place if you're searching for the great cost-effective OEM GM parts. Look no further than our vast inventory of genuine GM parts offered at unbeatable online prices, all of which are backed by the manufacturer's warranty. Not to forget, our hassle-free return policy and quick delivery service ensure a smooth shopping experience for you. For detailed GMC parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly