Make sure this part fits

GM 15981886 Shaft, Front Stabilizer

1995-2005 GM

Customer Questions & Expert Answers (9)
GM 15981886 Shaft, Front Stabilizer
  • Part Description
    SHAFT, Stabilizer
  • Position
    Front
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number15981886
    Part DescriptionSHAFT, Stabilizer
    Other NamesStabilizer Bar
    Item Dimensions41.4 x 14.7 x 4.2 inches
    Item Weight20.40 Pounds
    PositionFront
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU15981886
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    1995-2005 Chevrolet Blazer6 Cyl 4.3L2 DOOR, 4 DOOR
    1996-2003 Chevrolet S104 Cyl 2.2L, 4 Cyl 2.2L Flex, 6 Cyl 4.3LPICKUP
    1995-2001 GMC Jimmy6 Cyl 4.3L2 DOOR, 4 DOOR
    1996-2003 GMC Sonoma4 Cyl 2.2L, 4 Cyl 2.2L Flex, 6 Cyl 4.3LPICKUP
    1996-2001 Oldsmobile Bravada6 Cyl 4.3LBRAVADA
  • Customer Questions & Expert Answers

    Q:
    I am wonder if this is complete and correct part for my vehicle. Posted by GMPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 15981886 fits your vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    How do you remove the front stabilizer bar? Posted by Customer
    A:
    Raise the vehicle and support it securely on jackstands. Remove the nuts from the link bolts and remove the link bolts. Remove the sway bar kit. Remove the rubber bushings. Inspect all parts for wear and damage. When you install the rubber bushings on the sway bar kit, be sure to position them so the slits face toward the front of the vehicle. Installation is otherwise the reverse of removal. Be sure to tighten all fasteners.
    Posted by GMPartsGiant Specialist
    Q:
    What should you do after raising the 1996 Chevrolet Blazer and supporting it securely on jackstands? Posted by Customer
    A:
    After raising the vehicle and supporting it securely on jackstands, you should remove the nuts from the link bolts and take out the link bolts.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Sway Bar Kit
    Q:
    What should you do after raising and securing it on jackstands for the 1997 Chevrolet Blazer? Posted by Customer
    A:
    Remove the lower nuts, washers, and bolts from the stabilizer bar-to-frame bracket links.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Sway Bar Kit
    Q:
    What should you do after raising and securing it on jackstands for the 1994 Chevrolet S10? Posted by Customer
    A:
    Remove the lower nuts, washers, and bolts from the stabilizer bar-to-frame bracket links.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Sway Bar Kit
    Q:
    What should you do after removing the stabilizer bar assembly for the 1995 GMC Jimmy? Posted by Customer
    A:
    Inspect the stabilizer bar and link bushings for any cracks, tears, or deterioration, and replace them if necessary.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Sway Bar Kit
    Q:
    What should you do after removing the nuts and link bolts for the 2003 Chevrolet S10? Posted by Customer
    A:
    After removing the nuts and link bolts, you should remove the rubber bushings and inspect all parts for wear and damage.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Sway Bar Kit
    Q:
    What should you do after raising the 1994 GMC Sonoma and supporting it securely on jackstands? Posted by Customer
    A:
    After raising the vehicle and supporting it securely on jackstands, you should remove the nuts from the link bolts and take out the link bolts.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Sway Bar Kit
    Q:
    What is the next step after removing the lower nuts, washers, and bolts of the 1999 GMC Sonoma? Posted by Customer
    A:
    Remove the nuts from the U-bolts and take off the stabilizer bar clamps.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Sway Bar Kit
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 15981886, the Right Choice

To ensure reliability, purchase GM part # 15981886 Shaft, Front Stabilizer. It is sometimes referred to as GM Sway Bar Kit. Directly from GM, genuine parts are superb with regards to quality, longevity, and fit. Every single part passed stringent quality testing, so you can be sure that it's safe, durable, and built to perform like your original parts. This part fits specific Chevrolet Blazer, S10 models. It fits GMC Jimmy, Sonoma. It also fits Oldsmobile Bravada.

GMPartsGiant.com is a leading supplier of genuine GM parts and accessories such as GM 15981886 Shaft, Front Stabilizer. You're certainly in the right place if you're searching for the great cost-effective OEM GM parts. Look no further than our vast inventory of genuine GM parts offered at unbeatable online prices, all of which are backed by the manufacturer's warranty. Not to forget, our hassle-free return policy and quick delivery service ensure a smooth shopping experience for you. For detailed GMC parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly