Make sure this part fits

Chevrolet 26061505 Shaft Kit,Front Drive Axle Clutch

1995-1996 Chevrolet

Customer Questions & Expert Answers (17)
GM 26061505 Shaft Kit,Front Drive Axle Clutch
  • Part Description
    SHAFT KIT, Front Axle
  • Position
    Front
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Chevrolet
    Manufacturer Part Number26061505
    Part DescriptionSHAFT KIT, Front Axle
    Item Dimensions8.7 x 3.3 x 3.4 inches
    Item Weight2.20 Pounds
    PositionFront
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU26061505
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    1995-1996 Chevrolet Blazer6 Cyl 4.3L2 DOOR, 4 DOOR
    1995-1996 Chevrolet S104 Cyl 2.2L, 6 Cyl 4.3LPICKUP
  • Customer Questions & Expert Answers

    Q:
    I would like to confirm if this is the correct part number for my vehicle. Please advise. Thank you. Posted by GMPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 26061505 fits your vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    What are the final steps for reassembling the rear differential after installing the axleshafts and pinion shaft for the 2002 Chevrolet Blazer? Posted by Customer
    A:
    Finally, install the differential cover and fill it with the specified lubricant. Install the brake drums and wheels, and lower the vehicle.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What is the housing of the differential called, and how are the axle tubes attached to it for the 1996 Chevrolet Blazer? Posted by Customer
    A:
    The differential is housed within a casting known as the "carrier," which has a pressed steel cover. The steel axle tubes are pressed into and welded to the carrier.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How are the driveaxles retained in the 1996 Chevrolet Blazer? Posted by Customer
    A:
    The driveaxles are retained by snap rings at the inner end of the tri-pot joints.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What additional steps should you take if applicable for the 2002 Chevrolet Blazer? Posted by Customer
    A:
    If applicable, disconnect the vent hose and brake hose.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should be considered before assuming an axle problem, and why for the 2000 Chevrolet S10? Posted by Customer
    A:
    Before assuming the axle is the problem, it is important to check for other possible causes. Road noise, tire noise, and engine and transmission noise can be mistaken for axle issues.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How do you remove the C-lock and axleshaft for conventional differentials for the 1996 GMC Jimmy? Posted by Customer
    A:
    Have an assistant push in on the outer flanged end of the axle shaft while you remove the C-lock from the groove in the inner end of the shaft.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What type of rear axle assembly is used in the 1996 GMC Jimmy, and what is its purpose? Posted by Customer
    A:
    The rear axle assembly is a hypoid, semi-floating type with a differential. Its purpose is to allow the outer rear tire to turn more quickly than the inner tire when the vehicle goes around a corner, ensuring smooth handling.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should you do after removing the spacers and clamp plates for the 1995 Chevrolet S10? Posted by Customer
    A:
    Lower the jack and remove the rear axle assembly from under the vehicle.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should you do with the spring U-bolts for the 1999 GMC Jimmy? Posted by Customer
    A:
    Disconnect the spring U-bolts.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How should the axleshafts be installed back into the differential during reassembly for the 2002 Chevrolet S10? Posted by Customer
    A:
    Carefully insert the axleshaft into the housing and seat it securely in the differential.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should you do before removing the driveaxle flange bolts for the 2003 Chevrolet S10? Posted by Customer
    A:
    Mark the relationship of the inner CV joint to the flange.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should you do after breaking loose the driveaxle hub nut for the 1996 GMC Jimmy? Posted by Customer
    A:
    Remove the nut and washer.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What are the initial steps for removing the rear differential for the 2000 GMC Sonoma? Posted by Customer
    A:
    The initial steps for removing the rear differential are as follows: Raise the rear of the vehicle and support it securely on jackstands. Remove the wheel and brake drum. For vehicles with a locking differential, remove both rear wheels and brake drums.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How do you install the driveaxle for the 2003 GMC Sonoma? Posted by Customer
    A:
    Simply reverse the removal steps, making sure to tighten the driveaxle hub nut and CV joint flange bolts to the specified torque.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How do you start removing the rear axle assembly for the 1997 GMC Sonoma? Posted by Customer
    A:
    Start by loosening the rear wheel lug nuts and raising the rear of the vehicle with jackstands placed under the frame.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What is the housing of the differential called, and how are the axle tubes attached to it for the 1999 GMC Sonoma? Posted by Customer
    A:
    The differential is housed within a casting known as the "carrier," which has a pressed steel cover. The steel axle tubes are pressed into and welded to the carrier.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 26061505, the Right Choice

To ensure reliability, purchase GM part # 26061505 Shaft Kit,Front Drive Axle Clutch. It is sometimes referred to as Chevrolet Axle Shaft. Directly from GM, genuine parts are superb with regards to quality, longevity, and fit. Every single part passed stringent quality testing, so you can be sure that it's safe, durable, and built to perform like your original parts. This part fits specific Chevrolet Blazer, S10 models.

GMPartsGiant.com is a leading supplier of genuine GM parts and accessories such as GM 26061505 Shaft Kit,Front Drive Axle Clutch. You're certainly in the right place if you're searching for the great cost-effective OEM GM parts. Look no further than our vast inventory of genuine GM parts offered at unbeatable online prices, all of which are backed by the manufacturer's warranty. Not to forget, our hassle-free return policy and quick delivery service ensure a smooth shopping experience for you. For detailed Chevrolet parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly