Make sure this part fits

Chevrolet 17095173 Manifold Assembly, Upper Intake (W/ Throttle Body)

1995 Chevrolet

Customer Questions & Expert Answers (8)
GM 17095173 Manifold Assembly, Upper Intake (W/ Throttle Body)
  • Part Description
    MANIFOLD, Engine Fuel Intake Manifold
  • Position
    Upper
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Chevrolet
    Manufacturer Part Number17095173
    Part DescriptionMANIFOLD, Engine Fuel Intake Manifold
    Other NamesIntake Manifold, Throttle Body
    Item Dimensions17.8 x 11.3 x 9.9 inches
    Item Weight2.40 Pounds
    PositionUpper
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU17095173
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    1995 Chevrolet Beretta4 Cyl 2.2L2 DOOR, 4 DOOR, Z26 2 DOOR
    1995 Chevrolet Corsica4 Cyl 2.2L2 DOOR, 4 DOOR, Z26 2 DOOR
    1995 Chevrolet S104 Cyl 2.2LPICKUP
  • Customer Questions & Expert Answers

    Q:
    I am wonder if this is complete and correct part for my vehicle. Posted by GMPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 17095173 fits your vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    What additional components need to be removed before taking out the intake manifold for the 1994 Chevrolet Beretta? Posted by Customer
    A:
    You should also remove the oil/air separator and the oil fill cap and dipstick assembly. Additionally, unbolt and detach the oil fill tube from the engine block.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    What should be done after removing the intake manifold and gasket for the 1995 Chevrolet Beretta? Posted by Customer
    A:
    Scrape all traces of gasket material off the intake manifold and head gasket mating surfaces.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    How should the manifold mounting bolts be removed for the 1990 Chevrolet Beretta? Posted by Customer
    A:
    The manifold mounting bolts should be removed carefully, without prying between the manifold and heads.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    What should be done when reinstalling the intake manifold for the 2001 Chevrolet S10? Posted by Customer
    A:
    Ensure clean mating surfaces by removing old gasket material and applying RTV sealant as needed. Install new intake manifold gaskets, making sure they align correctly, and set the manifold in place while the sealant is wet. Tighten the manifold bolts in the recommended sequence, then proceed with the remaining installation steps in reverse order, starting the engine and checking for leaks.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    How should you secure the new manifold to the cylinder head for the 2003 Chevrolet S10? Posted by Customer
    A:
    To secure the new manifold to the cylinder head, place a new gasket on the manifold, hold the manifold in position against the cylinder head, and install the mounting nuts finger-tight.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    What should be done before removing and installing the intake manifold on the 2001 GMC Sonoma? Posted by Customer
    A:
    Disconnect the negative battery cable, remove the upper fan shroud, air cleaner assembly, drain the cooling system, and disconnect the upper radiator and heater hoses.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    How should you handle the spark plug wires during this process, and why should you mark them for the 1998 GMC Sonoma? Posted by Customer
    A:
    You should remove the spark plug wires from the coil pack, mark them for reassembly, and pull them up through the intake manifold, laying them over the left side of the engine.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Intake Manifold
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 17095173, the Right Choice

Your vehicle deserves only genuine OEM GM parts and accessories. To ensure reliability, purchase GM part # 17095173 Manifold Assembly, Upper Intake (W/ Throttle Body). It is sometimes referred to as Chevrolet Intake Manifold. Our GM parts and accessories are expedited directly from authorized GM dealers strategically located all across the U.S. and are backed by the manufacturer's 12 month, 12,000 mile warranty. OEM GM parts are the best for restoring your vehicle to factory condition performance. This part fits specific Chevrolet Beretta, Corsica, S10 models.

Affordable, reliable and built to last, GM part # 17095173 Manifold Assembly, Upper Intake (W/ Throttle Body) stands out as the smart option. GMPartsGiant.com is your prime online source with the biggest and best selection of genuine GM parts and accessories at giant discounted prices. We have the OEM GM parts and accessories you need at the wholesale prices. GMPartsGiant.com has you covered no matter what type of GM vehicle you drive. For detailed Chevrolet parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly