Make sure this part fits

Chevrolet 19303851 Steering Knuckle

2005-2011 Chevrolet

Customer Questions & Expert Answers (4)
GM 19303851 Steering Knuckle
  • Part Description
    Knuckle,Steering
  • Replaces
    22667248, 25836292
  • Manufacturer
    General Motors
Make sure this part fits
$143.51 MSRP: $361.07
You Save: $217.56 (61%)
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Chevrolet
    Manufacturer Part Number19303851
    Part DescriptionKnuckle,Steering
    Other NamesKnuckle, Lower Control Arm
    Item Dimensions12.5 x 11.6 x 6.3 inches
    Item Weight6.10 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces22667248, 25836292
    ManufacturerGeneral Motors
    SKU19303851
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2005-2010 Chevrolet Cobalt4 Cyl 2.0L, 4 Cyl 2.2L, 4 Cyl 2.4L2 DOOR, 4 DOOR, LEVEL 4 PERFORMANCE (SS) 2 DOOR, LEVEL 4 PERFORMANCE/SC (SS) 2 DOOR, LEVEL ONE (LS) 2 DOOR, LEVEL ONE (LS) 4 DOOR, LEVEL THREE (SS) 2 DOOR, LEVEL THREE (SS) 4 DOOR, LEVEL TWO (LT) 2 DOOR, LEVEL TWO (LT) 4 DOOR
    2006-2011 Chevrolet HHR4 Cyl 2.0L, 4 Cyl 2.2L, 4 Cyl 2.2L Flex, 4 Cyl 2.4L5 DOOR HIGH ROOF HATCHBACK, 5 DOOR HIGH ROOF HATCHBACK SS, 5 DOOR HIGH ROOF PANEL, 5 DOOR HIGH ROOF PANEL SS, 5 DOOR UPLEVEL HIGH ROOF HATCHBACK, 5 DOOR UPLEVEL HIGH ROOF PANEL
  • Customer Questions & Expert Answers

    Q:
    I am wonder if this is complete and correct part for my vehicle. Posted by GMPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 19303851 fits your vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    How do you install the driveaxle/hub of the 2010 Chevrolet Cobalt? Posted by Customer
    A:
    To install, guide the knuckle and hub assembly into position, inserting the driveaxle into the hub.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Steering Knuckle
    Q:
    How do you remove the driveaxle/hub for the 2007 Chevrolet HHR? Posted by Customer
    A:
    Start by loosening the driveaxle/hub nut and the wheel lug nuts. Then, raise the vehicle and support it securely on jackstands. Remove the wheel and the brake caliper with its bracket, supporting them with a piece of wire. Take off the brake disc from the hub and unplug the wheel speed sensor electrical connector if the vehicle has ABS. Mark the strut to the steering knuckle and loosen the strut-to-steering knuckle bolt nuts. Separate the tie-rod end from the steering knuckle arm and remove the balljoint-to-steering knuckle pinch bolt, separating the balljoint from the steering knuckle. Remove the driveaxle/hub nut and push the driveaxle from the hub, supporting the end with a piece of wire. Finally, remove the strut-to-knuckle bolts and carefully separate the steering knuckle from the strut.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Steering Knuckle
    Q:
    How do you remove the driveaxle/hub for the 2006 Saturn ION? Posted by Customer
    A:
    Start by loosening the driveaxle/hub nut and the wheel lug nuts. Then, raise the vehicle and support it securely on jackstands. Remove the wheel and the brake caliper with its bracket, supporting them with a piece of wire. Take off the brake disc from the hub and unplug the wheel speed sensor electrical connector if the vehicle has ABS. Mark the strut to the steering knuckle and loosen the strut-to-steering knuckle bolt nuts. Separate the tie-rod end from the steering knuckle arm and remove the balljoint-to-steering knuckle pinch bolt, separating the balljoint from the steering knuckle. Remove the driveaxle/hub nut and push the driveaxle from the hub, supporting the end with a piece of wire. Finally, remove the strut-to-knuckle bolts and carefully separate the steering knuckle from the strut.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Steering Knuckle
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 19303851, the Right Choice

To ensure reliability, purchase GM part # 19303851 Steering Knuckle. It is sometimes referred to as Chevrolet Steering Knuckle. Directly from GM, genuine parts are superb with regards to quality, longevity, and fit. Every single part passed stringent quality testing, so you can be sure that it's safe, durable, and built to perform like your original parts. This part fits specific Chevrolet Cobalt, HHR models.

GMPartsGiant.com is a leading supplier of genuine GM parts and accessories such as GM 19303851 Steering Knuckle. You're certainly in the right place if you're searching for the great cost-effective OEM GM parts. Look no further than our vast inventory of genuine GM parts offered at unbeatable online prices, all of which are backed by the manufacturer's warranty. Not to forget, our hassle-free return policy and quick delivery service ensure a smooth shopping experience for you. For detailed Chevrolet parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly