Chevrolet 15855632 Joint,Front Wheel Drive Shaft Tri, Pot

You can Select Your Vehicle to check if 15855632 fits your vehicle.

Universal joints are mechanical couplings that connect two rotating components at different angles. They consist of a yoke on each side connected by a crosspiece called a trunnion, with needle bearings in cups at each end of the trunnion for smooth torque transfer. Wear in the needle roller bearings can cause vibration, noise, and ultimately disintegration of the bearings. To check for wear, the driveshaft can be turned while holding the rear differential pinion flange or front half coupling, and any movement indicates considerable wear. A prybar can also be used to check for looseness between the universal joint and the driveshaft or flange. If wear is present, the driveshaft should be replaced. The constant velocity joint on the forward end of the driveshaft is not serviceable and must be replaced if worn or if the boot is damaged.

If wear is present, the driveshaft should be replaced.

Wear in the needle roller bearings can be checked by turning the driveshaft while holding the rear differential pinion flange or front half coupling, or by using a prybar to test for looseness.

If any wear is detected, the driveshaft should be replaced.

If any wear is detected, the driveshaft should be replaced.