Chevrolet 15164283 INSULATOR

You can Select Your Vehicle to check if 15164283 fits your vehicle.

To remove the sway bar kit, start by loosening the rear wheel lug nuts and raising the rear of the vehicle. Support it securely on jackstands and block the front wheels to prevent rolling. Remove the rear wheels. Then, remove the sway bar kit link-to-frame nuts/bolts and the nuts from the lower ends of the links. Separate the links from the bar. Finally, remove the sway bar kit by removing the clamp nuts. To install the sway bar kit, inspect the sway bar bushings and link bushings for any signs of deterioration and replace them if necessary. Then, follow the reverse order of removal, making sure to tighten all fasteners to the specified torque.

To install the stabilizer bar, simply reverse the removal steps, ensuring that all fasteners are tightened to the specified torque.