Make sure this part fits

Chevrolet 12679101 Cylinder Head Assembly (W/ Valve)

2012-2015 Chevrolet

Customer Questions & Expert Answers (10)
GM 12679101 Cylinder Head Assembly (W/ Valve)
  • Part Description
    Head Assembly, Cyl (W/ Valve)
  • Replaces
    12635547
  • Manufacturer
    General Motors
Make sure this part fits
$748.53 MSRP: $1185.92
You Save: $437.39 (37%)
Core Charge: $75.00
Ships in 1-3 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Chevrolet
    Manufacturer Part Number12679101
    Part DescriptionHead Assembly, Cyl (W/ Valve)
    Other NamesCylinder Head
    Item Dimensions24.1 x 15.6 x 10.9 inches
    Item Weight51.80 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces12635547
    ManufacturerGeneral Motors
    SKU12679101
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2012-2015 Chevrolet Captiva Sport6 Cyl 3.0LSPORT LT FWD
    2012 Chevrolet Equinox6 Cyl 3.0LLT SUV, LTZ SUV
  • Customer Questions & Expert Answers

    Q:
    I am wonder if this is complete and correct part for my vehicle. Posted by GMPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 12679101 fits your vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    How should the new head bolts be installed for the 2007 Cadillac CTS? Posted by Customer
    A:
    Coat the threads of the new 8 mm head bolts with a medium-strength thread locking compound, install them finger tight, then install the new 11 mm head bolts and tighten them finger tight.
    Posted by GMPartsGiant Specialist
    Q:
    What cleaning steps should be taken after removing the cylinder head for the 2010 Cadillac CTS? Posted by Customer
    A:
    Clean the mating faces of the cylinder head and block thoroughly, ensuring no carbon enters the oil and water passages, and check for any damage on the surfaces.
    Posted by GMPartsGiant Specialist
    Q:
    What should you do before starting the procedure for the 2007 Cadillac CTS? Posted by Customer
    A:
    Wait until the engine is completely cool before beginning this procedure.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Cylinder Head
    Q:
    Are there any specific steps for the 2013 Chevrolet Equinox? Posted by Customer
    A:
    Yes, for these models, remove the power brake booster pump and secure it out of the way.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Cylinder Head
    Q:
    How should the new cylinder head bolts be installed for the 2017 Chevrolet Equinox? Posted by Customer
    A:
    Install the new cylinder head bolts and tighten them in the recommended sequence to the specified torque, followed by turning each bolt the specified angle.
    Posted by GMPartsGiant Specialist
    Q:
    What should be done if resistance is felt when lifting the cylinder head for the 2009 Chevrolet Equinox? Posted by Customer
    A:
    Use a wood block and hammer to assist in lifting the cylinder head off the engine, and store the cylinder head on wood blocks to prevent damage.
    Posted by GMPartsGiant Specialist
    Q:
    How should the head bolts be loosened for the 2017 GMC Terrain? Posted by Customer
    A:
    Loosen the head bolts in 1/4-turn increments in the reverse order of the tightening sequence until they can be removed by hand, noting that there will be different lengths and sizes of bolts in different locations.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Cylinder Head
    Q:
    How should the new gasket be positioned for the 2010 GMC Terrain? Posted by Customer
    A:
    Position the new gasket over the dowel pins in the block, ensuring the correct side is facing up.
    Posted by GMPartsGiant Specialist
    Q:
    How should the new gasket and cylinder head be installed for the 2012 GMC Terrain? Posted by Customer
    A:
    Install the new gasket on the dowels in the block, carefully position the cylinder head on the engine block without disturbing the gasket, and install new cylinder head bolts.
    Posted by GMPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 12679101, the Right Choice

To ensure reliability, purchase GM part # 12679101 Cylinder Head Assembly (W/ Valve). It is sometimes referred to as Chevrolet Cylinder Head. Directly from GM, genuine parts are superb with regards to quality, longevity, and fit. Every single part passed stringent quality testing, so you can be sure that it's safe, durable, and built to perform like your original parts. This part fits specific Chevrolet Captiva Sport, Equinox models.

GMPartsGiant.com is a leading supplier of genuine GM parts and accessories such as GM 12679101 Cylinder Head Assembly (W/ Valve). You're certainly in the right place if you're searching for the great cost-effective OEM GM parts. Look no further than our vast inventory of genuine GM parts offered at unbeatable online prices, all of which are backed by the manufacturer's warranty. Not to forget, our hassle-free return policy and quick delivery service ensure a smooth shopping experience for you. For detailed Chevrolet parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly