Chevrolet 19213358 Cylinder Asm,Rear Brake

You can Select Your Vehicle to check if 19213358 fits your vehicle.

First, hinder the front wheels so that the vehicle does not move. Afterwards, slacken the lug nuts at the rear wheel and raise the tail end of the vehicle, holding it firmly onto jack stands. Remove both rear wheel and let off parking brake before removing brake drum. After that give a thorough clean around wheel cylinder area and remove any rubbish or foreign object. At the back of backing plate unscrew brake line fitting ensuring that you don't pull away brake line from wheel cylinder. Take out bleeder screw for wheel cylinder followed by its cover together with mounting bolts for wheel cylinder. Then release it from backing plate to which it is attached.Remove bleed screw cap.Taken out are mounting screws for fixing wheel cylinder on backing plate.Place it in position and attach brake lines' socket finger tight.Fix on again mounting bolts as required.Securely tighten up this bolt attaching brake lines.Plug in bleeder screw to close external opening after replacing cap.Then install on hub flange first shoes intended for brakes.Reinstall both wheels after putting lug nuts back on.Bleed a braking system, lower car to ground then secure each lug nut with correct torque specifications.The brakes should be properly checked before driving this automobile into normal traffic situations.

Before driving the vehicle in traffic, carefully check the operation of the brakes.