Chevrolet 84040481 Cleaner Assembly, Air

You can Select Your Vehicle to check if 84040481 fits your vehicle.

Begin the process of removing the air intake duct by disconnecting the PCV hose from the resonator on 2.4L engine models or the PCV fresh air tube from valve cover in V6 engine models. Next, undo the clamps at both ends of the intake duct and lift it off. To install, you only need to reverse this sequence. Similarly, to remove the air filter box, loosen its clamp and remove its duct from it. Then unplug MAF sensor's electrical connector and take out box mounting fastener so as to lift off box. Conversely, installation is just about reversing removal steps.

One must put new air filter element in after certain intervals. The air filter is located in a black plastic box positioned at the right side of the engine compartment on all models. To remove it, take out intake tube and then on models 2009 and earlier disengage retaining clips while on engines from 2010 onwards, loosen the four captive screws but do not try to take them out. Raising the housing cover up, remove the air filter element from its housing. Wipe away any debris that may have fallen into your wings with a clean cloth. Do not drop anything into the breather while you still have the cover off. Reverse this process to install the cover back onto the car after you have removed it.

The air filter element should be replaced with a new one.