Chevrolet 24502982 Belt, Timing

You can Select Your Vehicle to check if 24502982 fits your vehicle.

Lift the timing belt covers and check the timing belt for wear, paying special attention to the cracks, tears, or such effects like oil staining the belt, damage to the teeth of the belt should be checked. Deterioration or fray usually agrees with an area of being out of alignment for cam/belt drive parts, and so the belt is changed if required. Slide a very thin and narrow ruler under the tensioner pulley and check the depth from the edge of the pulley to the base of the tensioner - if the depth is 42.6 mm or less, the belt length is fine, but if the figure is 45.1 mm or more, the belt length is too large, and the belt must be replaced. Taking off the timing belt, identification of the rotation direction on the belt if it is to be reinstalled. When pulling the belt away take special care not to twist, fold or pry it; care should also be taken not to kink this part of the belt. To install, insert the mid part of the belt on the intermediate shaft sprocket then wrap the belt into the other sprockets or pulleys in an anti-clockwise manner until you gather all the slack, and then slip in the tensioner assembly to end the whole process.