Cadillac 15186674 Speaker,Radio Windshield Side Garnish Molding

You can Select Your Vehicle to check if 15186674 fits your vehicle.

Remove the car radio by starting with removing the heater and air conditioning control assembly then the center trim panel. After that, take off four screws that hold radio in place and pull out the radio from dashboard while unhooking electrical connectors and antenna cables at rear side of the radio. To remove a door speaker, detach the door trim panel and unscrew speaker mounting screw before pulling it out of the socket and unplugging its wiring connection. When installing a speaker, ensure that lower mounting flange aligns with lower edge of speaker mounting hole in the door. Remove a tweeter by taking away its A-pillar trim panel and unplug tweeter electrical connector to it. Grasp tightly onto a tweeter grille to pull off both grille and tweeter as one unit, then carefully separate our small tool from three retainers which enables us to split tweeters apart from grilles using their large sizes. Reinstallation is just opposite to removal procedure for all components.

To remove the radio in a vehicle, you need to start by removing the center trim panel and the heater and air conditioning control assembly. Then, remove the four radio mounting screws and pull the radio out from the dash. Finally, disconnect the electrical connectors and antenna cable from the backside of the radio.

To install a tweeter, simply reverse the removal process. Begin by attaching the tweeter to the grille using the three retainers. Then, align the tweeter grille assembly with the A-pillar trim panel and firmly press it into place. Finally, connect the tweeter electrical connector.

To install a tweeter, simply reverse the removal process. Begin by attaching the tweeter to the grille using the three retainers. Then, align the tweeter grille assembly with the A-pillar trim panel and firmly press it into place. Finally, connect the tweeter electrical connector.

To remove the radio in a vehicle, you need to start by removing the center trim panel and the heater and air conditioning control assembly. Then, remove the four radio mounting screws and pull the radio out from the dash. Finally, disconnect the electrical connectors and antenna cable from the backside of the radio.

To remove a door speaker, you first need to remove the door trim panel. Then, locate and remove the speaker mounting screw. After that, simply pull out the speaker and disconnect the electrical connector.