Cadillac 12608424 Sensor Assembly, Camshaft Position

You can Select Your Vehicle to check if 12608424 fits your vehicle.

Four CMP sensors are located on the cylinder heads' front. To replace a left-side sensor, drain the engine coolant, support the engine with a floor jack, remove the engine mount strut, bracket, radiator inlet hose, and power steering reservoir bolts. Move the reservoir aside, disconnect the CMP sensor connector, remove the sensor mounting bolt and the sensor. Reinstall in reverse order and refill the cooling system if drained.

To remove the camshaft position sensor 3.0L and 3.6L V6 engines have four camshaft sensors. If replacing the CMP sensor on the right side, remove the air filter housing. For the left side replacement on 2013 and later 3.6L models, remove the front engine mount. Installation is the reverse of removal. The 2.4L four-cylinder engine has two camshaft sensors, the intake camshaft position sensor located below the fuel pump, and the exhaust camshaft sensor located at the corner of the cylinder head above the exhaust manifold. To remove the intake camshaft position sensor, remove the fuel pump cover, disconnect the electrical connector, and remove the mounting bolt and the sensor from the cylinder head.

Remove the fuel pump cover, disconnect the electrical connector, and remove the mounting bolt and the sensor from the cylinder head. Installation is the reverse of removal.

A Buick Enclave has 2 camshaft position sensors