Cadillac 17086095 Canister Asm,Evap Emission

You can Select Your Vehicle to check if 17086095 fits your vehicle.

The Vapor Canister is designed to limit gasoline vapor discharge into the air when the vehicle is not operating. This system transfers fuel vapors from the fuel tank to a charcoal canister storage device, which absorbs and stores the vapors until they can be burned in the engine. When the engine is running, the fuel vapor is purged from the carbon element by intake airflow and consumed in the normal combustion process, facilitated by the EVAP purge solenoid valve. Split, cracked or improperly connected hoses; damaged canister; malfunctioning purge solenoid could turn out to be reasons of poor idle, stalling or poor driveability. It will only be necessary to service this vapor canister if it becomes clogged, is cracked or contains liquid fuel. The canister shall be replaced as it necessitates replacement i.e. it cannot be disassembled but must be replaced as a unit. Check for cracks, damage or signs of liquid fuel on The Evaporative Emission Canister. If any of these conditions are found, replace the canister. Hence, tag and detach all hoses attached to the charcoal canister; unbolt and remove canister; bolt down a new canister and finally bolt back all hoses unto it.

The most important component of the EVAP system is the EVAP charcoal canister, which stores the evaporated fuel drawn from the fuel tank.

The purpose of the evaporation control system is to reduce hydrocarbon emissions by redirecting wasted fuel back to the gas tank and storing fuel vapors instead of releasing them into the atmosphere.