Make sure this part fits

Buick 13579088 Sensor Assembly, Brake Pedal Position

2012 Buick

Customer Questions & Expert Answers (6)
GM 13579088 Sensor Assembly, Brake Pedal Position
  • Part Description
    SENSOR, Brake
  • Replaces
    22774281
  • Manufacturer
    General Motors
Make sure this part fits
$13.11 MSRP: $24.74
You Save: $11.63 (48%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Buick
    Manufacturer Part Number13579088
    Part DescriptionSENSOR, Brake
    Other NamesStoplamp Switch
    Item Dimensions4.0 x 3.1 x 2.1 inches
    Item Weight0.40 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces22774281
    ManufacturerGeneral Motors
    SKU13579088
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2012 Buick Allure4 Cyl 2.4L, 6 Cyl 3.6LCX 4 DOOR SEDAN, CXL 4 DOOR SEDAN, CXS 4 DOOR SEDAN
    2012 Buick LaCrosse4 Cyl 2.4L, 6 Cyl 3.6LCX 4 DOOR SEDAN, CXL 4 DOOR SEDAN, CXS 4 DOOR SEDAN
    2012 Buick Regal4 Cyl 2.0L, 4 Cyl 2.4LCX 4 DOOR SEDAN, CXL 4 DOOR SEDAN, CXS 4 DOOR SEDAN
  • Customer Questions & Expert Answers

    Q:
    I am wonder if this is complete and correct part for my vehicle. Posted by GMPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 13579088 fits your vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    How do you remove the BPP sensor on Chevrolet Camaro? Posted by Customer
    A:
    Remove the insulation panel and the knee bolster. Disconnect the electrical connector at the sensor. Remove the Brake Light Switch mounting fastener and remove the sensor from the bracket. Install the sensor to the bracket and tighten the sensor mounting bolt securely.
    Posted by GMPartsGiant Specialist
    Q:
    How to Troubleshoot and Replace the Brake Light Switch on Chevrolet Express and GMC Savana? Posted by Customer
    A:
    The brake light switch is located on the side and activates the brake lights when the pedal is depressed. If there is voltage, check for power at the brake light wires at the tail light housings. If there is no power, repair the circuit between the switch and the brake lights. If there is power, check for bad ground using a jumper wire connected to a good ground. To replace the switch, remove the left side under the dash panel and the heater/air conditioning duct. Unplug the electrical connector from the switch and remove the clip that retains the switch and pushrod to the pin on the brake pedal arm. Slip the brake light switch off the pin and install the new switch by reversing the removal procedure.
    Posted by GMPartsGiant Specialist
    Q:
    What should you do after disconnecting the electrical connector for the 2017 Chevrolet Express? Posted by Customer
    A:
    Remove the bolt securing the sensor to the brake pedal.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Brake Light Switch
    Q:
    What should be checked if the brake lights are not working for the 2011 Chevrolet Express? Posted by Customer
    A:
    First, check the fuse to see if it is functional. If the fuse is good, check for voltage to the brake light switch on the feed wire. If there is no voltage, repair the wire between the switch and the fuse box. If there is voltage, proceed to the next step.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Brake Light Switch
    Q:
    Is there anything else you need to do for proper functioning of the 1996 GMC Savana? Posted by Customer
    A:
    Yes, make sure to have the brake pedal position sensor calibrated.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Brake Light Switch
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 13579088, the Right Choice

To ensure reliability, purchase GM part # 13579088 Sensor Assembly, Brake Pedal Position. It is sometimes referred to as Buick Brake Light Switch. Directly from GM, genuine parts are superb with regards to quality, longevity, and fit. Every single part passed stringent quality testing, so you can be sure that it's safe, durable, and built to perform like your original parts. This part fits specific Buick Allure, LaCrosse, Regal models.

GMPartsGiant.com is a leading supplier of genuine GM parts and accessories such as GM 13579088 Sensor Assembly, Brake Pedal Position. You're certainly in the right place if you're searching for the great cost-effective OEM GM parts. Look no further than our vast inventory of genuine GM parts offered at unbeatable online prices, all of which are backed by the manufacturer's warranty. Not to forget, our hassle-free return policy and quick delivery service ensure a smooth shopping experience for you. For detailed Buick parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly