Make sure this part fits

Buick 10054563 Seal Unit, Crank/Shaft Rear Oil (Free Of Asbestos)

1982-1986 Buick

Customer Questions & Expert Answers (13)
GM 10054563 Seal Unit, Crank/Shaft Rear Oil (Free Of Asbestos)
  • Part Description
    SEAL KIT, Engine Rear Main Bearing
  • Position
    Rear
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Buick
    Manufacturer Part Number10054563
    Part DescriptionSEAL KIT, Engine Rear Main Bearing
    Other NamesRear Main Seal
    Item Dimensions4.1 x 2.0 x 4.1 inches
    Item Weight0.60 Pounds
    PositionRear
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU10054563
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    1985-1986 Buick Century6 Cyl 2.8LCUSTOM 2 DOOR, CUSTOM 4 DOOR, CUSTOM STATION WAGON, LIMITED 2 DOOR, LIMITED 4 DOOR
    1982-1986 Buick Skyhawk4 Cyl 1.8L, 4 Cyl 2.0L2 DOOR, 4 DOOR, CUSTOM 2 DOOR, CUSTOM 2 DOOR NOTCHBACK, CUSTOM 4 DOOR, CUSTOM STATION WAGON, LIMITED 2 DOOR, LIMITED 4 DOOR, LIMITED WAGON, SPORT 2 DOOR, STATION WAGON, T-TYPE 2 DOOR
    1982-1985 Buick Skylark6 Cyl 2.8L2 DOOR, 4 DOOR, CUSTOM 2 DOOR, CUSTOM 4 DOOR, LIMITED 2 DOOR, LIMITED 4 DOOR
  • Customer Questions & Expert Answers

    Q:
    I am wonder if this is complete and correct part for my vehicle. Posted by GMPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 10054563 fits your vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    How do I install the new oil seal in the bearing cap for the 1985 Buick Century? Posted by Customer
    A:
    Quickly roll a new seal into the groove with both ends projecting above the cap's parting surface, using a suitable tool. Apply a thin film of chassis grease to the rope seal's working surface and force it into the groove until it projects no more than 1/8 inch (1.5mm) above the groove. Cut the seal ends flush with the cap's surface using a razor blade.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Crankshaft Seal
    Q:
    What is the torque specification for the main bearing cap attaching bolts for the 1984 Buick Skylark? Posted by Customer
    A:
    Torque all main bearing cap attaching bolts to the proper specification, except for the number 5 (L4) or number 3 (V6) main bearing cap, which should be torqued to about 10 to 12 ft-lb initially.
    Posted by GMPartsGiant Specialist
    Q:
    How should the new seal be prepared before installation for the 1982 Buick Skylark? Posted by Customer
    A:
    Coat the seal lips of the new seal with light engine oil, avoiding oil on the seal mating ends.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Crankshaft Seal
    Q:
    What should be done before removing the crank pulley for the 1984 Buick Skylark? Posted by Customer
    A:
    Mark the position of the pulley to the hub before removing it.
    Posted by GMPartsGiant Specialist
    Q:
    What should be applied to the seal contact surface of the hub for the 1984 Pontiac Firebird? Posted by Customer
    A:
    Apply a thin layer of clean multipurpose grease.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Crankshaft Seal
    Q:
    What technique should be used to ensure the seal is properly seated for the 1981 Oldsmobile Omega? Posted by Customer
    A:
    Roll the seal around the crankshaft using the tool as a shoehorn, and once both ends of the seal are flush with the engine block, carefully remove the installation tool without withdrawing the seal.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Crankshaft Seal
    Q:
    How should the crank pulley be installed for the 1984 Oldsmobile Omega? Posted by Customer
    A:
    Install the crank pulley onto the hub, aligning it with the marks made during removal.
    Posted by GMPartsGiant Specialist
    Q:
    What is the next step after marking the pulley for the 1983 Pontiac Phoenix? Posted by Customer
    A:
    Detach the bolts securing the crank pulley to the hub and lift it out.
    Posted by GMPartsGiant Specialist
    Q:
    What should be done to align the rear bearing properly for the 1981 Oldsmobile Omega? Posted by Customer
    A:
    Tap the end of the crankshaft with a lead hammer to align the rear bearing properly, then retorque all bearing cap bolts to the proper specification.
    Posted by GMPartsGiant Specialist
    Q:
    Is it easier to replace the rear main oil seal with the engine removed or in place for the 1980 Pontiac Phoenix? Posted by Customer
    A:
    Replacing the seal is much easier with the engine removed from the car, but it can still be done with the engine in place.
    Posted by GMPartsGiant Specialist
    Q:
    What is the torque specification for the main bearing cap attaching bolts for the 1981 Pontiac Phoenix? Posted by Customer
    A:
    Torque all main bearing cap attaching bolts to the proper specification, except for the number 5 (L4) or number 3 (V6) main bearing cap, which should be torqued to about 10 to 12 ft-lb initially.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Crankshaft Seal
    Q:
    What should be inspected for V8 engine for the 1982 Pontiac Firebird? Posted by Customer
    A:
    For V8 engines from 1985 and earlier, it is important to inspect the bearing cap and engine block mating surfaces for defects.
    Posted by GMPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 10054563, the Right Choice

To ensure reliability, purchase GM part # 10054563 Seal Unit, Crank/Shaft Rear Oil (Free Of Asbestos). It is sometimes referred to as Buick Crankshaft Seal. Directly from GM, genuine parts are superb with regards to quality, longevity, and fit. Every single part passed stringent quality testing, so you can be sure that it's safe, durable, and built to perform like your original parts. This part fits specific Buick Century, Skyhawk, Skylark models.

GMPartsGiant.com is a leading supplier of genuine GM parts and accessories such as GM 10054563 Seal Unit, Crank/Shaft Rear Oil (Free Of Asbestos). You're certainly in the right place if you're searching for the great cost-effective OEM GM parts. Look no further than our vast inventory of genuine GM parts offered at unbeatable online prices, all of which are backed by the manufacturer's warranty. Not to forget, our hassle-free return policy and quick delivery service ensure a smooth shopping experience for you. For detailed Buick parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly