Make sure this part fits

Buick 26100286 Rod Kit,Steering Linkage Outer Tie

2004-2007 Buick Rainier

Customer Questions & Expert Answers (4)
GM 26100286 Rod Kit,Steering Linkage Outer Tie
  • Part Description
    ROD KIT, Steering Tie Rod Outer
  • Position
    Outer
  • Manufacturer
    General Motors
Make sure this part fits
$158.83 MSRP: $253.32
You Save: $94.49 (38%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Buick
    Manufacturer Part Number26100286
    Part DescriptionROD KIT, Steering Tie Rod Outer
    Other NamesOuter Tie Rod
    Item Dimensions7.2 x 6.5 x 13.1 inches
    Item Weight3.10 Pounds
    PositionOuter
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU26100286
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2004-2007 Buick Rainier6 Cyl 4.2L, 8 Cyl 5.3L4 DOOR
  • Customer Questions & Expert Answers

    Q:
    I would like to confirm if this is the correct part number for my vehicle. Please advise. Thank you. Posted by GMPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 26100286 fits your vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    How do you remove the tie-rod end? Posted by Customer
    A:
    To remove the tie-rod end, start by loosening the wheel lug nuts and raising the front of the vehicle. Support it securely on jackstands and apply the parking brake. Block the rear wheels to prevent the vehicle from rolling. Remove the wheel and measure the length of exposed threads on the tie-rod end. Write down this measurement and then break loose the tie-rod end jam nut. Loosen the nut on the tie-rod end ball stud, but do not remove it. Use a puller to break loose the tie-rod end from the steering knuckle arm. Remove the nut and detach the tie rod end from the steering knuckle. Unscrew the tie rod end from the tie rod. To install the new tie-rod end, thread the new jam nut onto it so that the same length of threads is exposed. Connect the tie-rod end to the steering knuckle arm and install the nut on the ball stud. Tighten it to the specified torque. Securely tighten the jam nut and install the wheel. Lower the vehicle and tighten the lug nuts to the specified torque. Finally, have the front-end alignment checked and adjusted if necessary.
    Posted by GMPartsGiant Specialist
    Q:
    What should you do after installing the new tie-rod end for the 2007 Chevrolet Trailblazer? Posted by Customer
    A:
    Install the wheel. Lower the vehicle and tighten the lug nuts to the specified torque. Finally, have the front-end alignment checked and adjusted if necessary.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Tie Rod End
    Q:
    The guy on chat said I need to contact you. This is not the only number I need. Please read my note below: I need to know the part numbers for rear sway bar end-links. I think you call them stabilizer links - for the rear sway bar. Also, the part numbers for front tie rods passenger and driver and the part number for the transfer case motor. This is the motor that switches the transmission from 2D, 4D LO and 4D HI. Posted by Customer: 2003 Light Truck Trailblazer / Envoy / Bravada (4WD / AWD)
    A:
    88982342 L LINK KIT, RR STAB SHF - LH (Service Lane Part) ST155 2002-2005 01 102.58 4F 1550C 88982343 R LINK KIT, RR STAB SHF - RH (Service Lane Part) ST155 2002-2005 01 102.58 4F 1550C 26100288 ROD KIT, STRG LNKG INR TIE (16MM X 1.5) (W/GEARS STAMPED 15162147,15185191, 15217081) (Service Lane Part) ST1 NON-VARIABLE P/S (N40) 2003-2009 02 162.53 9D X0038 26100286 L ROD KIT, STRG LNKG OTR TIE (16MM THREADS ON GEAR END) - LH (Service Lane Part) ST1 NON-VARIABLE P/S (N40) 2003-2004 01 215.33 9D X0039 26100287 R ROD KIT, STRG LNKG OTR TIE (16MM THREADS ON GEAR END) - RH (Service Lane Part) ST1 NON-VARIABLE P/S (N40) 2003-2004 01 215.33 9D X0039 28 89059275 04.563 ACTUATOR, TRFER CASE FOUR WHL DRV (INCLS 29,30) (INCLS MOTOR ENCODER) (ACDelco #89059275) (Service Lane Part) T155 (EXC NP4) 2002 - 2003 01 7E 3A X0102
    Posted by GMPartsGiant Specialist 22/5/2017
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 26100286, the Right Choice

To ensure reliability, purchase GM part # 26100286 Rod Kit,Steering Linkage Outer Tie. It is sometimes referred to as Buick Tie Rod, Buick Tie Rod End. Directly from GM, genuine parts are superb with regards to quality, longevity, and fit. Every single part passed stringent quality testing, so you can be sure that it's safe, durable, and built to perform like your original parts. This part fits specific Buick Rainier models.

GMPartsGiant.com is a leading supplier of genuine GM parts and accessories such as GM 26100286 Rod Kit,Steering Linkage Outer Tie. You're certainly in the right place if you're searching for the great cost-effective OEM GM parts. Look no further than our vast inventory of genuine GM parts offered at unbeatable online prices, all of which are backed by the manufacturer's warranty. Not to forget, our hassle-free return policy and quick delivery service ensure a smooth shopping experience for you. For detailed Buick parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly