×
Contact Us Live Chat or 1-888-737-9766
My Garage
My Account
Cart
Search Bar
Search by Part Number, Part Name, or Vehicle
Track Order Help Center
Make sure this part fits

Buick 20877116 Fuel Pump Flow Control Module

2010-2012 Buick

Customer Questions & Expert Answers (13)
GM 20877116 Fuel Pump Flow Control Module
GM 20877116 Fuel Pump Flow Control Module
GM 20877116 Fuel Pump Flow Control Module
GM 20877116 Fuel Pump Flow Control Module
GM 20877116 Fuel Pump Flow Control Module
GM 20877116 Fuel Pump Flow Control Module
  • Part Description
    Module,Fuel Pump Flow Control
  • Replaces
    20850927, 20791901, 20827745
  • Manufacturer
    General Motors
Make sure this part fits
$117.85 MSRP: $247.58
You Save: $129.73 (53%)
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers

  • Related Parts

    Shop for related parts for your vehicle

  • Product Specifications

    BrandGenuine Buick
    Manufacturer Part Number20877116
    Part DescriptionModule,Fuel Pump Flow Control
    Other NamesControl Module, Module
    Item Dimensions10.1 x 6.7 x 3.4 inches
    Item Weight1.30 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces20850927, 20791901, 20827745
    ManufacturerGeneral Motors
    SKU20877116
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65

  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2010-2012 Buick Allure4 Cyl 2.4L, 6 Cyl 3.0L, 6 Cyl 3.6LCX 4 DOOR SEDAN, CXL 4 DOOR SEDAN, CXS 4 DOOR SEDAN, SPS 4 DOOR SEDAN
    2010-2012 Buick Enclave6 Cyl 3.6LSPORT UTILITY VEHICLE 2WD, SPORT UTILITY VEHICLE 4WD, SPORT UTILITY VEHICLE AWD
    2010-2012 Buick LaCrosse4 Cyl 2.4L, 6 Cyl 3.0L, 6 Cyl 3.6LCX 4 DOOR SEDAN, CXL 4 DOOR SEDAN, CXS 4 DOOR SEDAN, SPS 4 DOOR SEDAN
    2011-2012 Buick Regal4 Cyl 2.0L, 4 Cyl 2.4LCX 4 DOOR SEDAN, CXL 4 DOOR SEDAN, CXL TURBO 4 DOOR SEDAN, CXS 4 DOOR SEDAN

  • Customer Questions & Expert Answers

    Q:
    I would like to confirm if this is the correct part number for my vehicle. Please advise. Thank you. Posted by GMPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 20877116 fits your vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    How do I remove the FPFCM module on Buick LaCrosse? Posted by Customer
    A:
    To remove the fuel pump driver module, disconnect the cable from the negative terminal of the battery. Remove the right-side trim panel in the trunk. Disconnect the electrical connector from the FPDM. Remove the FPDM retaining bolts and detach the module from its mounting bracket. Installation is the reverse of removal.
    Posted by GMPartsGiant Specialist
    Q:
    How to replace the fuel pressure sensor and remove the chassis control module on Chevrolet Express? Posted by Customer
    A:
    To replace the fuel pressure sensor, start by relieving the system fuel pressure. Then, raise the vehicle and support it securely on jackstands. Disconnect the electrical connector from the fuel pressure sensor and unscrew it from the fuel supply line. Remove the old fuel pressure sensor O-ring and replace it with a new one coated in clean engine oil. Securely tighten the fuel pressure sensor. Before lowering the vehicle, test for leaks by turning the ignition switch key to the ON position for two seconds, then to the OFF position for ten seconds, and finally back to the ON position. Inspect the area around the fuel pressure sensor for leaks. To remove the fuel pump driver module, locate it under the vehicle mounted to the outside of the driver's side frame rail. Raise the front of the vehicle and support it securely on jackstands. Disconnect the electrical connector from the fuel pump driver module and remove the module from its mounting bracket by removing the nut. To install the fuel pump driver module, simply reverse the removal process.
    Posted by GMPartsGiant Specialist
    Q:
    How to replace the fuel pressure sensor and fuel pump flow control module on Chevrolet Avalanche,Silverado,Suburban,Tahoe,GMC Sierra,Yukon,Yukon Denali and Yukon XL? Posted by Customer
    A:
    To replace the fuel pressure sensor, relieve the fuel system pressure, lift the vehicle onto jackstands, and disconnect the sensor's electrical connector. Unscrew the old sensor, discard its o-ring, and fit a new oiled o-ring onto the new sensor. Reinstall in reverse order, ensuring the sensor is tight. Before lowering, test for leaks by toggling the ignition switch to ON for two seconds, OFF for ten seconds, and back to ON, checking for any leaks around the sensor. For the fuel pump driver module, elevate the vehicle, disconnect its electrical connector, remove three mounting bolts, and extract the module. Reverse the process to install.
    Posted by GMPartsGiant Specialist
    Q:
    How do you remove the FPFCM on Buick Enclave,Chevrolet Traverse and GMC Acadia? Posted by Customer
    A:
    Raise the rear of the vehicle and support it securely on jackstands. Disconnect the electrical connector from the Fuel Pump Driver Module (FPDM). Loosen the bolts that retain the FPDM, then slide the module mounting bracket to disengage it from the bolt heads. Installation is the reverse of removal.
    Posted by GMPartsGiant Specialist
    Q:
    What should you do after raising the 2015 Buick Enclave? Posted by Customer
    A:
    Disconnect the electrical connector from the FPFCM and loosen the bolts that retain it.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Fuel Pump Driver Module
    Q:
    How should you tighten the fuel pressure sensor for the 2013 Chevrolet Avalanche? Posted by Customer
    A:
    You should tighten the fuel pressure sensor securely.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Fuel Pump Driver Module
    Q:
    How do you remove the FPFCM for the 2009 Chevrolet Traverse? Posted by Customer
    A:
    Start by raising the rear of the vehicle and supporting it securely on jackstands.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Fuel Pump Driver Module
    Q:
    What is the first step to replace the fuel pressure sensor for the 2009 Chevrolet Silverado? Posted by Customer
    A:
    The first step is to relieve the system fuel pressure and raise the vehicle on jackstands.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Fuel Pump Driver Module
    Q:
    What should you do after tightening the fuel pressure sensor for the 2011 Chevrolet Tahoe? Posted by Customer
    A:
    After tightening the fuel pressure sensor, you should test for leaks before lowering the vehicle.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Fuel Pump Driver Module
    Q:
    What should be done after raising the 2013 GMC Sierra on jackstands? Posted by Customer
    A:
    After raising the vehicle on jackstands, you should disconnect the electrical connector.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Fuel Pump Driver Module
    Q:
    How do you replace the fuel pump flow control module for the 2010 GMC Yukon? Posted by Customer
    A:
    To replace the fuel pump flow control module, you need to disconnect the electrical connector and remove the three mounting bolts before removing the module from its bracket.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Fuel Pump Driver Module
    Q:
    Is this compatible with this vehicle? And would it have to be reprogram? Posted by Customer: 2011 Buick Enclave (AWD)
    A:
    PART# 20877116 FITS PER VIN# AND WILL NEED PROGRAMMED...
    Posted by GMPartsGiant Specialist 12/8/2022
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 20877116, the Right Choice

To ensure reliability, purchase GM part # 20877116 Fuel Pump Flow Control Module. It is sometimes referred to as Buick Fuel Pump Driver Module. Directly from GM, genuine parts are superb with regards to quality, longevity, and fit. Every single part passed stringent quality testing, so you can be sure that it's safe, durable, and built to perform like your original parts. This part fits specific Buick Allure, Enclave, Regal models.

GMPartsGiant.com is a leading supplier of genuine GM parts and accessories such as GM 20877116 Fuel Pump Flow Control Module. You're certainly in the right place if you're searching for the great cost-effective OEM GM parts. Look no further than our vast inventory of genuine GM parts offered at unbeatable online prices, all of which are backed by the manufacturer's warranty. Not to forget, our hassle-free return policy and quick delivery service ensure a smooth shopping experience for you. For detailed Buick parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly