Other Name: Module Assembly, Fuel Pump Power Control
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2016 Chevrolet Silverado | 2500 CREW CAB STANDARD BOX, 2500 REGULAR CAB, 3500 CREW CAB LONG BOX, 3500 CREW CAB ONLY, 3500 CREW CAB STANDARD BOX, 3500 DOUBLE CAB LONG BOX, 3500 REGULAR CAB, CREW CAB 2500 LONG BOX, DOUBLE CAB 2500 LONG BOX, DOUBLE CAB 2500 STANDARD BOX | 8 Cyl 6.0L
Chevrolet Silverado Fuel Pump Driver Module
Each OEM Chevrolet Silverado Fuel Pump Driver Module we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.
Chevrolet Silverado Fuel Pump Driver Module Parts Questions & Experts Answers
Q: How to replace the fuel pressure sensor and fuel pump flow control module on Chevrolet Avalanche,Silverado,Suburban,Tahoe,GMC Sierra,Yukon,Yukon Denali and Yukon XL?
A: To replace the fuel pressure sensor, relieve the fuel system pressure, lift the vehicle onto jackstands, and disconnect the sensor's electrical connector. Unscrew the old sensor, discard its o-ring, and fit a new oiled o-ring onto the new sensor. Reinstall in reverse order, ensuring the sensor is tight. Before lowering, test for leaks by toggling the ignition switch to ON for two seconds, OFF for ten seconds, and back to ON, checking for any leaks around the sensor. For the fuel pump driver module, elevate the vehicle, disconnect its electrical connector, remove three mounting bolts, and extract the module. Reverse the process to install.