Make sure this part fits

Buick 22527149 Camshaft Assembly, Engine

1982-1990 Buick

Customer Questions & Expert Answers (11)
GM 22527149 Camshaft Assembly, Engine
  • Part Description
    CAMSHAFT, Engine
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Buick
    Manufacturer Part Number22527149
    Part DescriptionCAMSHAFT, Engine
    Other NamesCamshaft
    Item Dimensions28.2 x 3.1 x 3.1 inches
    Item Weight12.60 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU22527149
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    1982-1989 Buick Estate Wagon8 Cyl 5.0LCUSTOM 2 DOOR, CUSTOM 4 DOOR, ELECTRA ESTATE WAGON, ESTATE WAGON, LIMITED 2 DOOR, LIMITED 2 DOOR COLLECT SP EDIT, LIMITED 4 DOOR, LIMITED 4 DOOR COLLECT SP EDIT
    1988-1990, 1982-1985 Buick Lesabre8 Cyl 5.0LCUSTOM 2 DOOR, CUSTOM 4 DOOR, ELECTRA ESTATE WAGON, ESTATE WAGON, LIMITED 2 DOOR, LIMITED 2 DOOR COLLECT SP EDIT, LIMITED 4 DOOR, LIMITED 4 DOOR COLLECT SP EDIT
    1982-1987 Buick Regal8 Cyl 5.0L2 DOOR, 4 DOOR, REGAL, STATION WAGON
    1982-1985 Buick Riviera8 Cyl 5.0LCONVERTIBLE COUPE, RIVIERA, T TYPE
  • Customer Questions & Expert Answers

    Q:
    I would like to confirm if this is the correct part number for my vehicle. Please advise. Thank you. Posted by GMPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 22527149 fits your vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    How do I extract the camshaft in the 1986 Buick Regal? Posted by Customer
    A:
    To extract the camshaft, assemble a puller with the appropriate components, such as the puller screw, expanding collet, and back-up nut. Insert this assembly into the camshaft bearing for removal. Repeat this process for each bearing, except the front one, which can be extracted using a spacer.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    How should the camshaft be mounted for measurement for the 1984 Chevrolet Caprice? Posted by Customer
    A:
    Mount the camshaft on V-blocks.
    Posted by GMPartsGiant Specialist
    Q:
    What is the first step in the process for the 1981 Chevrolet Caprice? Posted by Customer
    A:
    Drain the cooling system.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What should be removed after creating clearance for the camshaft for the 1981 Chevrolet Caprice? Posted by Customer
    A:
    Remove the fuel pump and fuel pump pushrod, then take off the torsional damper, crankcase front cover, and camshaft sprocket/timing chain.
    Posted by GMPartsGiant Specialist
    Q:
    What should be done if the engine has been removed from the car for the 1986 Chevrolet El Camino? Posted by Customer
    A:
    If the engine has been removed from the car, disregard the following steps which do not apply.
    Posted by GMPartsGiant Specialist
    Q:
    What is the oil hole alignment for Mark IV VB bearings for the 1985 Chevrolet El Camino? Posted by Customer
    A:
    For Mark IV VB, the No.1 through No. 4 oil holes must align with the cam bearing bore oil holes, while the No. 5 bearing bore should be at or near the 6 o'clock position.
    Posted by GMPartsGiant Specialist
    Q:
    What is the first step in the process for the 1983 Chevrolet El Camino? Posted by Customer
    A:
    Drain the cooling system.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    How can the camshaft be pulled out for the 1991 Oldsmobile Cutlass? Posted by Customer
    A:
    Install two bolts into the camshaft bolt holes to use as grips for pulling the camshaft.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What should be confirmed before re-installing the camshaft for the 1982 Oldsmobile Cutlass? Posted by Customer
    A:
    Confirm that the camshaft timing marks are aligned.
    Posted by GMPartsGiant Specialist
    Q:
    What should be done if the bearings are worn for the 1995 Oldsmobile Cutlass? Posted by Customer
    A:
    Worn bearings can be extracted using a suitable tool, such as GM tool set No. J-6098.
    Posted by GMPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 22527149, the Right Choice

To ensure reliability, purchase GM part # 22527149 Camshaft Assembly, Engine. It is sometimes referred to as Buick Camshaft. Directly from GM, genuine parts are superb with regards to quality, longevity, and fit. Every single part passed stringent quality testing, so you can be sure that it's safe, durable, and built to perform like your original parts. This part fits specific Buick Lesabre, Regal, Riviera models.

GMPartsGiant.com is a leading supplier of genuine GM parts and accessories such as GM 22527149 Camshaft Assembly, Engine. You're certainly in the right place if you're searching for the great cost-effective OEM GM parts. Look no further than our vast inventory of genuine GM parts offered at unbeatable online prices, all of which are backed by the manufacturer's warranty. Not to forget, our hassle-free return policy and quick delivery service ensure a smooth shopping experience for you. For detailed Buick parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly