Make sure this part fits

Buick 7846870 Front Wheel Drive Axle SHAFT KIT

1983-1989 Buick Skyhawk

Customer Questions & Expert Answers (8)
GM 7846870 Front Wheel Drive Axle SHAFT KIT
  • Part Description
    Shaft Kit, Front Wheel Drive Axle
  • Position
    Front
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Buick
    Manufacturer Part Number7846870
    Part DescriptionShaft Kit, Front Wheel Drive Axle
    Item Dimensions30.7 x 5.1 x 5.1 inches
    Item Weight17.90 Pounds
    PositionFront
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU7846870
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    1983-1989 Buick Skyhawk4 Cyl 1.8L, 4 Cyl 2.0L2 DOOR, 4 DOOR, CUSTOM 2 DOOR, CUSTOM 2 DOOR NOTCHBACK, CUSTOM 4 DOOR, CUSTOM STATION WAGON, LIMITED 2 DOOR, LIMITED 4 DOOR, LIMITED WAGON, SPORT 2 DOOR, STATION WAGON, T-TYPE 2 DOOR
  • Customer Questions & Expert Answers

    Q:
    Will this part number fit my car? Posted by GMPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 7846870 fits your vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    What should be done after disconnecting the battery for the 1990 Chevrolet Beretta? Posted by Customer
    A:
    After disconnecting the battery, loosen the front wheel lug nuts, raise the vehicle, and support it securely on jack stands before removing the wheel.
    Posted by GMPartsGiant Specialist
    Q:
    What is the final step in the process for the 1988 Chevrolet Beretta? Posted by Customer
    A:
    Insert the balljoint stud into the steering knuckle and tighten the nut, ensuring a new cotter pin is used. Finally, install the stabilizer bar-to-control arm bolt, then install the wheel and tire, tightening the lug nuts to the specified torque.
    Posted by GMPartsGiant Specialist
    Q:
    What is the typical process for boot replacement for the 1993 Chevrolet Beretta? Posted by Customer
    A:
    Boot replacement typically involves removing the driveaxle. However, some auto parts stores offer split-type replacement boots that can be installed without removal. It is advisable to remove the driveaxle and disassemble the CV joint for thorough cleaning to eliminate contaminants that could accelerate wear.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What components need to be installed after positioning the new axle for the 1995 Chevrolet Beretta? Posted by Customer
    A:
    Install the coil springs and insulators, then connect the shock absorbers.
    Posted by GMPartsGiant Specialist
    Q:
    What should be done during installation of the 1991 Oldsmobile Cutlass? Posted by Customer
    A:
    Installation is a reversal of removal, but tighten all suspension bolts and nuts to the specified torque.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should be done after removing the wheel and brake drum of the 1994 Oldsmobile Cutlass? Posted by Customer
    A:
    After removing the wheel and brake drum, the pressed steel cover from the differential carrier should be unscrewed and removed, allowing the oil to drain into a suitable container.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should you do before installing the new bearing of the 1993 Oldsmobile Cutlass? Posted by Customer
    A:
    Before installing the new bearing, make sure to install the retainer plate and the seal to the shaft first.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 7846870, the Right Choice

To ensure reliability, purchase GM part # 7846870 Front Wheel Drive Axle SHAFT KIT. It is sometimes referred to as Buick Axle Shaft. Directly from GM, genuine parts are superb with regards to quality, longevity, and fit. Every single part passed stringent quality testing, so you can be sure that it's safe, durable, and built to perform like your original parts. This part fits specific Buick Skyhawk models.

GMPartsGiant.com is a leading supplier of genuine GM parts and accessories such as GM 7846870 Front Wheel Drive Axle SHAFT KIT. You're certainly in the right place if you're searching for the great cost-effective OEM GM parts. Look no further than our vast inventory of genuine GM parts offered at unbeatable online prices, all of which are backed by the manufacturer's warranty. Not to forget, our hassle-free return policy and quick delivery service ensure a smooth shopping experience for you. For detailed Buick parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly