How is power transmitted from the transaxle to the wheels through driveaxles on Chevrolet Beretta?

Two driveaxles transfer power from the transaxle to the wheels, through the side gears of the differential if the latter's inner ends are splined, or an intermediate axleshaft if the splined parts are the outer ends of the driveaxles; the outer ends of the axles are splined to the axle hubs and locked by a large nut. The inner ends have CV joints with a slide that provides an angular as well as axial movement; some of the assemblies consist of tripot bearing and a joint housing that permits sliding when the driveaxle moves along the wheel, the others are ball-and-cage type where there are six balls between the inner and outer races separated by a cage. These inner joints can only be serviced - disassembled, cleaned and repacked; it cannot be overhauled, and when some of the parts are damaged, the entire unit needs to be replaced. Self-supporting outer CV joints, cross-groove or ball-and-cage design, enable angular motion but no axial movement and like the inner joint both are designed for dismantling and cleaning with worn components: being replaced by new complete units. One has to check the boots' condition often as finding a damaged CV joint boot should prompt an immediate replacement to avoid the joint's deterioration. Boot replacement in most cases requires the driveaxle to be removed but some auto part stores stocks split-type replacement boots that can be installed without the driveaxle being removed. Still, aspiring to clean up the driveaxle and reveal for cleaning the CV joint that those contaminants will quicken put on and tear the unit, it is preferable to take out the driveaxle and disassemble the CV joint in part. Some of the signs that a CV joint has become worn or damaged include grease leakage and squeaking sound on operation. On each axle, the CV joint housings should be held and the axle rotated in both of the directions and any play in the splines or loose joints indicating wear in the CV joints and the driveaxle shafts should be checked for cracks, dents and distortion.

Genuine Chevrolet Beretta Axle Shaft

Car Axle Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

46 Axle Shafts found

View related parts
Chevrolet Beretta Shaft Assembly
Part Number: 14105646
$54.81 MSRP: $78.77
You Save: $23.96 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Asm
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1987-1989 Chevrolet Beretta | 2 DOOR, 4 DOOR, 4 DOOR NOTCHBACK, 4 DOOR PLAIN BACK HATCHBACK, LTZ | 4 Cyl 2.0L, 6 Cyl 2.8L
View related parts
Chevrolet Beretta Front Wheel Drive Shaft Kit
Part Number: 26018518
$467.07 MSRP: $741.57
You Save: $274.50 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Kit, Front Wheel Drive; Axle Assembly, Axle Shaft, Drive Axle
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1993 Chevrolet Beretta | 2 DOOR, 4 DOOR | 6 Cyl 3.1L
View related parts
Chevrolet Beretta Front Wheel Drive Shaft Kit
Part Number: 26010875
$289.34 MSRP: $552.54
You Save: $263.20 (48%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Kit,Front Wheel Drive ; Shaft Kit, Front Wheel Drive Axle
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991 Chevrolet Beretta | 2 DOOR, 4 DOOR | 4 Cyl 2.2L, 6 Cyl 3.1L
View related parts
Chevrolet Beretta Front Wheel Drive Shaft Kit
Part Number: 26018513
$604.06 MSRP: $959.05
You Save: $354.99 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Kit, Front Wheel Drive; Axle Assembly, Drive Axle
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1993 Chevrolet Beretta | 2 DOOR, 4 DOOR | 6 Cyl 3.1L
View related parts
Chevrolet Beretta Front Wheel Drive Shaft Kit
Part Number: 26087488
$324.61 MSRP: $513.04
You Save: $188.43 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Kit,Front Wheel Drive; Axle Assembly, Drive Axle
- Position: Front
- Replaces: 26018524
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1993 Chevrolet Beretta | 2 DOOR, 4 DOOR | 6 Cyl 3.1L
View related parts
Chevrolet Beretta Rear Axle
Part Number: 12353516
Product Specifications
- Other Name: Axle, Rear Axle
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1994 Chevrolet Beretta | 4 DOOR | 4 Cyl 2.2L, 4 Cyl 2.3L, 6 Cyl 3.1L
View related parts
Chevrolet Beretta Rear Axle
Part Number: 18023245
Product Specifications
- Other Name: Axle, Rear Axle; Axle Beam
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1996 Chevrolet Beretta | 2 DOOR, 4 DOOR, Z26 2 DOOR | 4 Cyl 2.2L, 6 Cyl 3.1L
View related parts
Chevrolet Beretta Rear Axle
Part Number: 22592489
Product Specifications
- Other Name: Axle, Rear Axle
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1994 Chevrolet Beretta | 4 DOOR | 4 Cyl 2.2L, 4 Cyl 2.3L, 6 Cyl 3.1L
View related parts
Chevrolet Beretta Front Wheel Drive Axle Shaft
Part Number: 26003631
Product Specifications
- Other Name: Shaft, Front Wheel Drive Axle; Axle Shaft
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1994 Chevrolet Beretta | 2 DOOR, 4 DOOR, Z26 2 DOOR | 4 Cyl 2.3L
View related parts
Chevrolet Beretta Front Wheel Drive Axle Shaft
Part Number: 26003635
Product Specifications
- Other Name: Shaft, Front Wheel Drive Axle
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991 Chevrolet Beretta | 2 DOOR, 4 DOOR | 6 Cyl 3.1L
View related parts
Chevrolet Beretta Front Wheel Drive Axle SHAFT KIT
Part Number: 26005513
Product Specifications
- Other Name: Shaft Kit, Front Wheel Drive Axle; Axle Assembly, Drive Axle
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1990-1991 Chevrolet Beretta | 2 DOOR, 4 DOOR, 4 DOOR NOTCHBACK, 4 DOOR PLAIN BACK HATCHBACK, LTZ | 6 Cyl 3.1L
View related parts
Chevrolet Beretta Front Wheel Drive Axle SHAFT KIT
Part Number: 26005521
Product Specifications
- Other Name: Shaft Kit, Front Wheel Drive Axle; Axle Assembly
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1990-1991 Chevrolet Beretta | 2 DOOR, 4 DOOR, 4 DOOR NOTCHBACK, 4 DOOR PLAIN BACK HATCHBACK, LTZ | 4 Cyl 2.2L, 4 Cyl 2.3L, 6 Cyl 3.1L
View related parts
Chevrolet Beretta Front Wheel Drive Shaft Kit
Part Number: 26018510
Product Specifications
- Other Name: Shaft Kit, Front Wheel Drive ; Shaft Kit, Front Wheel Drive Axle; Axle Assembly, Drive Axle
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1993 Chevrolet Beretta | 2 DOOR, 4 DOOR | 6 Cyl 3.1L
View related parts
Chevrolet Beretta Front Wheel Drive Axle SHAFT KIT
Part Number: 26018512
Product Specifications
- Other Name: Shaft Kit, Front Wheel Drive Axle; Axle Assembly
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994 Chevrolet Beretta | 2 DOOR, 4 DOOR, Z26 2 DOOR | 4 Cyl 2.3L
- 1992 Chevrolet Beretta | 2 DOOR, 4 DOOR | 4 Cyl 2.3L
View related parts
Chevrolet Beretta Front Wheel Drive Axle Shaft
Part Number: 26039162
Product Specifications
- Other Name: Shaft, Front Wheel Drive Axle; Axle Shaft, Shaft
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1995 Chevrolet Beretta | 2 DOOR, 4 DOOR, Z26 2 DOOR | 4 Cyl 2.2L
- 1987-1989 Chevrolet Beretta | 2 DOOR, 4 DOOR, 4 DOOR NOTCHBACK, 4 DOOR PLAIN BACK HATCHBACK, LTZ | 4 Cyl 2.0L, 6 Cyl 2.8L
View related parts
Chevrolet Beretta Front Wheel Drive Axle Shaft
Part Number: 26049902
Product Specifications
- Other Name: Shaft, Front Wheel Drive Axle
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996 Chevrolet Beretta | 2 DOOR, 4 DOOR, Z26 2 DOOR | 4 Cyl 2.2L
View related parts
Chevrolet Beretta Front Wheel Drive Axle Shaft
Part Number: 26049908
Product Specifications
- Other Name: Shaft, Front Wheel Drive Axle
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996 Chevrolet Beretta | 2 DOOR, 4 DOOR, Z26 2 DOOR | 4 Cyl 2.2L
View related parts
Chevrolet Beretta Front Wheel Drive Axle Shaft
Part Number: 7845153
Product Specifications
- Other Name: Shaft, Front Wheel Drive Axle; Axle Shaft, Shaft
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1993 Chevrolet Beretta | 2 DOOR, 4 DOOR | 6 Cyl 3.1L
View related parts
Chevrolet Beretta SHAFT
Part Number: 7846170
Product Specifications
- Other Name: Axle Shaft
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1987-1989 Chevrolet Beretta | 2 DOOR, 4 DOOR, 4 DOOR NOTCHBACK, 4 DOOR PLAIN BACK HATCHBACK, LTZ | 4 Cyl 2.0L, 6 Cyl 2.8L
View related parts
Chevrolet Beretta Front Wheel Drive Axle SHAFT KIT
Part Number: 7846868
Product Specifications
- Other Name: Shaft Kit, Front Wheel Drive Axle
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1990-1991 Chevrolet Beretta | 2 DOOR, 4 DOOR, 4 DOOR NOTCHBACK, 4 DOOR PLAIN BACK HATCHBACK, LTZ | 4 Cyl 2.2L, 4 Cyl 2.3L, 6 Cyl 3.1L

| Page 1 of 3 |Next >

1-20 of 46 Results

Chevrolet Beretta Axle Shaft

In the Chevrolet Beretta Cars, the Axle Shaft is crucial in transmitting torque to the drive wheels so that these wheels can turn unilaterally for better tractive force generation during turning. Usually made of sturdy steel material, these axle shafts are made for material and rigorous use of cars while being responsive to the overall stability and performance of the vehicle in motion. Halfshafts found in Chevrolet Beretta models is characterized by splined ends where they engage the differential and wheel hub. Such a design can be effective for power transfer especially in carriages with independent suspensions. Over the years, variations in axle shaft configurations may have occurred, but the primary function remains consistent: for bracing the weight of the car and also in order to allow easy rotation of the wheels. However, worn out components pose danger to the vehicles by causing noise, vibration, and sometimes failure of the Axle Shaft system on Chevrolet Beretta.

Each OEM Chevrolet Beretta Axle Shaft we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Chevrolet Beretta Axle Shaft Parts Questions & Experts Answers

SHAFT
7846170
Q: How is power transmitted from the transaxle to the wheels through driveaxles on Chevrolet Beretta?
A: Two driveaxles transfer power from the transaxle to the wheels, through the side gears of the differential if the latter's inner ends are splined, or an intermediate axleshaft if the splined parts are the outer ends of the driveaxles; the outer ends of the axles are splined to the axle hubs and locked by a large nut. The inner ends have CV joints with a slide that provides an angular as well as axial movement; some of the assemblies consist of tripot bearing and a joint housing that permits sliding when the driveaxle moves along the wheel, the others are ball-and-cage type where there are six balls between the inner and outer races separated by a cage. These inner joints can only be serviced - disassembled, cleaned and repacked; it cannot be overhauled, and when some of the parts are damaged, the entire unit needs to be replaced. Self-supporting outer CV joints, cross-groove or ball-and-cage design, enable angular motion but no axial movement and like the inner joint both are designed for dismantling and cleaning with worn components: being replaced by new complete units. One has to check the boots' condition often as finding a damaged CV joint boot should prompt an immediate replacement to avoid the joint's deterioration. Boot replacement in most cases requires the driveaxle to be removed but some auto part stores stocks split-type replacement boots that can be installed without the driveaxle being removed. Still, aspiring to clean up the driveaxle and reveal for cleaning the CV joint that those contaminants will quicken put on and tear the unit, it is preferable to take out the driveaxle and disassemble the CV joint in part. Some of the signs that a CV joint has become worn or damaged include grease leakage and squeaking sound on operation. On each axle, the CV joint housings should be held and the axle rotated in both of the directions and any play in the splines or loose joints indicating wear in the CV joints and the driveaxle shafts should be checked for cracks, dents and distortion.