Make sure this part fits

Buick 7842347 Axle Assembly

1982-1983 Buick

Customer Questions & Expert Answers (9)
GM 7842347 Axle Assembly
  • Part Description
    Axle Assy
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Buick
    Manufacturer Part Number7842347
    Part DescriptionAxle Assy
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU7842347
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    1982-1983 Buick Century4 Cyl 2.5L, 6 Cyl 3.0L, 6 Cyl 4.3L DieselCUSTOM 2 DOOR, CUSTOM 4 DOOR, CUSTOM STATION WAGON, LIMITED 2 DOOR, LIMITED 4 DOOR
    1982 Buick Skyhawk4 Cyl 1.8L2 DOOR, 4 DOOR, LIMITED 2 DOOR, LIMITED 4 DOOR
    1982-1983 Buick Skylark4 Cyl 2.5L, 6 Cyl 2.8L2 DOOR, 4 DOOR, LIMITED 2 DOOR, LIMITED 4 DOOR
  • Customer Questions & Expert Answers

    Q:
    Will this part number fit my car? Posted by GMPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 7842347 fits your vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    What type of lubricant does GM recommend for positraction/limited slip differentials for the 1980 Buick Century? Posted by Customer
    A:
    GM recommends a specialized lubricant designed explicitly for these units, typically available at Buick parts departments.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How should you install the seal retainer onto the inner joint assembly for the 1982 Buick Skylark? Posted by Customer
    A:
    Use a press to install the seal retainer onto the inner joint assembly.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How should the axleshaft be installed into the transaxle for the 1985 Buick Skylark? Posted by Customer
    A:
    Install the axleshaft into the transaxle by tapping it until seated.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should be avoided when working with the drive axle assemblies for the 1984 Buick Skylark? Posted by Customer
    A:
    It is advised not to attempt to heat or straighten any part of the drive axle assemblies as this could weaken the metal or cause other damage.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should be checked before installation of the rear axle for the 1980 Buick Skylark? Posted by Customer
    A:
    Prior to installation, you should ensure the lower edge of the control arms are on a true horizontal plane and adjust the control arm brackets to a 45° angle if needed.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How should the axle assembly be lowered of the 1989 Oldsmobile Cutlass? Posted by Customer
    A:
    Slowly lower the axle assembly.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should you do if the bearing becomes separated into three parts during axleshaft removal of the 1992 Oldsmobile Cutlass? Posted by Customer
    A:
    If the bearing becomes separated into three parts during axleshaft removal, remove the two sections left behind from the axle tube. This does not indicate that the bearing is unserviceable.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should be done after removing the pressed steel cover of the 1992 Oldsmobile Cutlass? Posted by Customer
    A:
    After removing the pressed steel cover, the lock screw from the differential pinion shaft should be unscrewed and removed.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 7842347, the Right Choice

To ensure reliability, purchase GM part # 7842347 Axle Assembly. It is sometimes referred to as Buick Axle Shaft. Directly from GM, genuine parts are superb with regards to quality, longevity, and fit. Every single part passed stringent quality testing, so you can be sure that it's safe, durable, and built to perform like your original parts. This part fits specific Buick Century, Skyhawk, Skylark models.

GMPartsGiant.com is a leading supplier of genuine GM parts and accessories such as GM 7842347 Axle Assembly. You're certainly in the right place if you're searching for the great cost-effective OEM GM parts. Look no further than our vast inventory of genuine GM parts offered at unbeatable online prices, all of which are backed by the manufacturer's warranty. Not to forget, our hassle-free return policy and quick delivery service ensure a smooth shopping experience for you. For detailed Buick parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly