Where is the brake light switch located and how do you access it?

The brake pedal bracket's top is where the brake light switch is found in the driver-side footwell. The driver's side lower trim panel must be removed to gain access to it. Once the panel has been taken off, disconnect the electric connector from the switch and turn the switch 90 degrees clockwise to take it out. For fitting of new switch, rotate it counterclockwise through 90° while sliding it into its mounting bracket then immediately connect up electrical connector. After fitting, push down on the brake pedal until it stops moving and draw outwards on plunger before releasing brake pedal . Lastly press down on the brake and then release it check that when you put your leg back there are no more lights shining again.

Genuine Saturn LS1 Brake Light Switch

Brake Lamp Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Brake Light Switches found

View related parts
Saturn LS1 Switch Asm,Stop Lamp
Part Number: 90504499
$6.36 MSRP: $10.14
You Save: $3.78 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: SWITCH, Stop Lamp Switch
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000 Saturn LS1 | LS, LS1, LS2, LW1, LW2 | 4 Cyl 2.2L
View related parts
Saturn LS1 Switch Asm,Cruise Control Release
Part Number: 22712549
$7.25 MSRP: $10.83
You Save: $3.58 (34%)
Product Specifications
- Other Name: SWITCH, Stop Lamp Switch; Release Switch, Stoplamp Switch
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000 Saturn LS1 | LS, LS1, LS2, LW1, LW2 | 4 Cyl 2.2L

Saturn LS1 Brake Light Switch

Simply, it is a component of the Saturn LS1 cars, which relays a signal to the brake lights when the brake pedal is depressed. This mechanism creates awareness to drivers or anyone at the rear that a vehicle has slowed down or stopped thus increasing on road safety. Although the general idea that the author paves does not mention varying types or kinds of Brake Light Switch installed in LS1 vehicles, it stresses the switch as an item to alert other drivers. Thus Brake Light Switch plays important role in communication and safety while driving thus can be said to be very effective.

Each OEM Saturn LS1 Brake Light Switch we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Saturn LS1 Brake Light Switch Parts Questions & Experts Answers

Switch Asm,Stop Lamp
90504499
Q: Where is the brake light switch located and how do you access it?
A: The brake pedal bracket's top is where the brake light switch is found in the driver-side footwell. The driver's side lower trim panel must be removed to gain access to it. Once the panel has been taken off, disconnect the electric connector from the switch and turn the switch 90 degrees clockwise to take it out. For fitting of new switch, rotate it counterclockwise through 90° while sliding it into its mounting bracket then immediately connect up electrical connector. After fitting, push down on the brake pedal until it stops moving and draw outwards on plunger before releasing brake pedal . Lastly press down on the brake and then release it check that when you put your leg back there are no more lights shining again.