How to remove the steering gear boot for Chevrolet Cobalt,HHR and Saturn ION?

To remove the rack and pinion boot, start by loosening the lug nuts and raising the vehicle, then support it securely on jackstands. Remove the wheel and proceed to remove the tie-rod end and jam nut. Use pliers to remove the outer rack and pinion boot clamp and cut off the inner boot clamp with diagonal cutters. Slide off the boot. Before installing the new boot, wrap the threads and serrations on the end of the steering rod with tape to protect the small end of the new boot. Slide the new boot into position on the rack and pinion, ensuring it seats in the groove in the steering rod, and install new clamps. Remove the tape and proceed to install the tie-rod end. For installation, start by installing the wheel and lug nuts, then lower the vehicle and tighten the lug nuts to the proper torque specifications. Finally, have the front end alignment checked.

Genuine Saturn Ion Rack and Pinion Boot

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Rack and Pinion Boot found

View related parts
Saturn Ion Boot Kit, Steering Gear
Part Number: 15225591
Product Specifications
- Other Name: BOOT KIT, Steering Tie Rod; Boot Kit, Tie Rod Boot
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2007 Saturn Ion | 2 DOOR, 4 DOOR, REDLINE 2 DOOR | 4 Cyl 2.0L, 4 Cyl 2.2L, 4 Cyl 2.4L

Saturn Ion Rack and Pinion Boot

Known for its functionality in the safety of the steering rack from dirt and other form of contamination, the Rack and Pinion Boot in Saturn Ion vehicles is uniquely mounted on the car. The above shown rubber part fits and seals both ends of the rack so as to keep the interiority of the rack's mechanisms safe from contaminants. If the Rack and Pinion Boot gets damaged or develops crack, it easily exposes the rack and pinion system and therefore it may fail at times. While the overview does not specify different types or styles of Rack and Pinion Boot used in various Ion models, the primary function remains consistent across all iterations: to promote a cleanliness of sorts inside the steering mechanism to avoid pollution of the system. both the Rack and Pinion Boot should be inspected and maintained periodically to guarantee optimal performance of the vehicle's steering elements.

Each OEM Saturn Ion Rack and Pinion Boot we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Saturn Ion Rack and Pinion Boot Parts Questions & Experts Answers

Boot Kit, Steering Gear
15225591
Q: How to remove the steering gear boot for Chevrolet Cobalt,HHR and Saturn ION?
A: To remove the rack and pinion boot, start by loosening the lug nuts and raising the vehicle, then support it securely on jackstands. Remove the wheel and proceed to remove the tie-rod end and jam nut. Use pliers to remove the outer rack and pinion boot clamp and cut off the inner boot clamp with diagonal cutters. Slide off the boot. Before installing the new boot, wrap the threads and serrations on the end of the steering rod with tape to protect the small end of the new boot. Slide the new boot into position on the rack and pinion, ensuring it seats in the groove in the steering rod, and install new clamps. Remove the tape and proceed to install the tie-rod end. For installation, start by installing the wheel and lug nuts, then lower the vehicle and tighten the lug nuts to the proper torque specifications. Finally, have the front end alignment checked.