How do you remove the release cylinder for Chevrolet Cobalt,HHR and Saturn ION?

To remove the clutch slave cylinder, start by disconnecting the quick-connect hydraulic line fitting. Then, remove the transaxle and the fasteners securing the clutch slave cylinder to the transaxle. Slide the clutch slave cylinder assembly off the transaxle input shaft. For installation, lubricate the inside diameter of the bearing with high-temperature grease. Apply a thread-locking compound to the clutch slave cylinder mounting fasteners and tighten them to the specified torque. Install the transaxle and connect the hydraulic fitting. Check the fluid level in the brake fluid reservoir and add brake fluid conforming to DOT 3 specifications if needed. Finally, bleed the system.

Genuine Saturn Ion Clutch Slave Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Clutch Slave Cylinders found

View related parts
Saturn Ion Cylinder Assembly, Clutch Actuator
Part Number: 22615300
$138.18 MSRP: $206.05
You Save: $67.87 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: CYLINDER, Clutch Hydraulic Release Slave/Actuator; Actuator
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2007 Saturn Ion | 2 DOOR, 4 DOOR, REDLINE 2 DOOR | 4 Cyl 2.0L, 4 Cyl 2.2L, 4 Cyl 2.4L
View related parts
Saturn Ion Cylinder Assembly, Clutch Actuator
Part Number: 12583857
$113.06 MSRP: $178.72
You Save: $65.66 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: CYLINDER, Clutch Hydraulic Release Slave/Actuator; Actuator, Slave Cylinder
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2007 Saturn Ion | 2 DOOR, 4 DOOR, REDLINE 2 DOOR | 4 Cyl 2.0L, 4 Cyl 2.2L, 4 Cyl 2.4L

Saturn Ion Clutch Slave Cylinder Parts Questions & Experts Answers

Cylinder Assembly, Clutch Actuator
22615300
Q: How do you remove the release cylinder for Chevrolet Cobalt,HHR and Saturn ION?
A: To remove the clutch slave cylinder, start by disconnecting the quick-connect hydraulic line fitting. Then, remove the transaxle and the fasteners securing the clutch slave cylinder to the transaxle. Slide the clutch slave cylinder assembly off the transaxle input shaft. For installation, lubricate the inside diameter of the bearing with high-temperature grease. Apply a thread-locking compound to the clutch slave cylinder mounting fasteners and tighten them to the specified torque. Install the transaxle and connect the hydraulic fitting. Check the fluid level in the brake fluid reservoir and add brake fluid conforming to DOT 3 specifications if needed. Finally, bleed the system.