How do you disconnect the ignition switch and remove the lock cylinder on Pontiac Vibe?

Disconnect the cable from the negative terminal of the battery. Remove the steering column covers. Unplug the ignition switch wiring harness connectors, then remove the switch retaining screws and pull the switch from the lock cylinder housing, with installation being the reverse of removal. For models equipped with the engine immobilizer system, gently dry off the plastic shroud around the key lock cylinder and disconnect the electrical connector, lifting the shroud edge from the locating tab just enough to slip it off, as it houses the amplifier for the special transponder keys. Pry lightly to remove the illumination ring and then take out the unlock arming switch. Insert the key and turn it to the ACC position. Use a small screwdriver or punch to depress the lock cylinder retaining pin, then withdraw the key cylinder. To install the lock cylinder, depress the retaining pin and guide it into the housing until the retaining pin extends back into the locating hole, with the remainder of installation being the reverse of removal.

Genuine Pontiac Vibe Ignition Lock Cylinder

Ignition Key Lock Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Ignition Lock Cylinders found

View related parts
Pontiac Vibe Cylinder,Ignition Lock(W/Key)
Part Number: 88969899
$38.06 MSRP: $71.82
You Save: $33.76 (48%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: CYLINDER, Ignition Switch; Cylinder & Key, Ignition Lock Cylinder
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2008 Pontiac Vibe | ALL PURPOSE 4 DOOR, ALL PURPOSE 4 DOOR AWD, ALL PURPOSE 4 DOOR GT | 4 Cyl 1.8L
View related parts
Pontiac Vibe Cylinder,Ignition Lock
Part Number: 19184242
$137.28 MSRP: $183.03
You Save: $45.75 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: CYLINDER, Ignition Switch; Cylinder & Key
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2010 Pontiac Vibe | 4 DOOR AWD, ALL PURPOSE 4 DOOR | 4 Cyl 1.8L, 4 Cyl 2.4L
View related parts
Pontiac Vibe Cylinder,Ignition Lock
Part Number: 19184239
$65.99 MSRP: $87.98
You Save: $21.99 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: CYLINDER, Ignition Switch; Cylinder & Key, Ignition Lock Cylinder
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2010 Pontiac Vibe | 4 DOOR AWD, ALL PURPOSE 4 DOOR, FWD GT | 4 Cyl 1.8L, 4 Cyl 2.4L
View related parts
Pontiac Vibe Cylinder,Ignition Lock(W/Key)
Part Number: 88975021
Product Specifications
- Other Name: CYLINDER, Ignition Switch
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008 Pontiac Vibe | ALL PURPOSE 4 DOOR | 4 Cyl 1.8L
View related parts
Pontiac Vibe Cylinder,Ignition Lock
Part Number: 19184241
Product Specifications
- Other Name: CYLINDER, Ignition Switch; Cylinder & Key
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2010 Pontiac Vibe | 4 DOOR AWD, ALL PURPOSE 4 DOOR, FWD GT | 4 Cyl 1.8L, 4 Cyl 2.4L
View related parts
Pontiac Vibe Cylinder,Ignition Lock
Part Number: 19184240
Product Specifications
- Other Name: CYLINDER, Ignition Switch; Cylinder & Key
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2010 Pontiac Vibe | 4 DOOR AWD, ALL PURPOSE 4 DOOR | 4 Cyl 1.8L, 4 Cyl 2.4L

Pontiac Vibe Ignition Lock Cylinder

The primary use of the Ignition Lock Cylinder in Pontiac Vibe car is that it provides the driver with a lock mechanism for starting the vehicle through insertion of a key and rotate it. This component is connected to the ignition switch as power to all the necessary circuits is supplied by the battery when the key is switched to the START position. Key and tumbler are exceptionally designed to ensure no intruder gets a chance to get access to the vehicle. Years ago, Pontiac Vibe models had key-operated ignition lock cylinders, but today's Pontiac Vibe have touchless push-button ignition cylinder. Whereas the former requires a key to insert and turn the ignition, the latter uses a key fob which interfaces with the car's computer and which allows the car to be started by simply pressing a button. A shift to keyless systems has benefits both in terms of accessibility as in the number of components which can make the system go wrong. However, it should be mentioned that the Ignition Lock Cylinder also have their problem- after wearing or malfunctioning, it can cause problems with the start or with shutdowns at the wrong time.

Each OEM Pontiac Vibe Ignition Lock Cylinder we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Pontiac Vibe Ignition Lock Cylinder Parts Questions & Experts Answers

Cylinder,Ignition Lock(W/Key)
88969899
Q: How do you disconnect the ignition switch and remove the lock cylinder on Pontiac Vibe?
A: Disconnect the cable from the negative terminal of the battery. Remove the steering column covers. Unplug the ignition switch wiring harness connectors, then remove the switch retaining screws and pull the switch from the lock cylinder housing, with installation being the reverse of removal. For models equipped with the engine immobilizer system, gently dry off the plastic shroud around the key lock cylinder and disconnect the electrical connector, lifting the shroud edge from the locating tab just enough to slip it off, as it houses the amplifier for the special transponder keys. Pry lightly to remove the illumination ring and then take out the unlock arming switch. Insert the key and turn it to the ACC position. Use a small screwdriver or punch to depress the lock cylinder retaining pin, then withdraw the key cylinder. To install the lock cylinder, depress the retaining pin and guide it into the housing until the retaining pin extends back into the locating hole, with the remainder of installation being the reverse of removal.