My Garage
My Account
Cart
Genuine Pontiac Vibe Door Lock Cylinder
Door Lock Cylinder Tumbler- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
12 Door Lock Cylinders found
Pontiac Vibe Cylinder,Front Side Door Lock(W/Keys)
Part Number: 19184236$28.47 MSRP: $33.17You Save: $4.70 (15%)Ships in 1-2 Business Days
Pontiac Vibe Cylinder Set,Front Side Door & Lift Gate & Ignition Lock
Part Number: 19204671$95.36 MSRP: $119.99You Save: $24.63 (21%)Ships in 1-2 Business Days
Pontiac Vibe Lift Gate Lock Cylinder (W/Key)
Part Number: 88969898$72.12 MSRP: $107.82You Save: $35.70 (34%)
Pontiac Vibe Door Lock Cylinder
Door Lock Cylinders are other significant parts used in the front doors of Pontiac Vibe cars to lock and unlock using car keys. At the same time, taking into consideration that car manufacturers have been eliminating door lock cylinders during production, they are still integrated into numerous cars. They are used frequently, and this leads to wear and tear; therefore, they might have to be replaced from time to time to enhance proper functioning. Common tell-tales that indicate a door lock cylinder has worn includes challenge in locking and unlocking the door or key jamming or getting stuck in the lock. To avoid get locked out of your car, or worse; have a break in looming, prompt replacement of a faulty door lock cylinder is advisable.
Each OEM Pontiac Vibe Door Lock Cylinder we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.
Pontiac Vibe Door Lock Cylinder Parts Questions & Experts Answers
- Q: How do you remove a door latch, handle and lock cylinder?A: To remove the Door Latch Assembly, remove the door trim panel, the plastic water shield, and the door panel brace. Disconnect the control links from the latch. If the vehicle has power door locks, disconnect the electrical connector at the latch. Remove the latch retaining screws at the end of the door. Detach the door latch as well as the door lock solenoid. For installation, simply follow the reverse order of removal. For the lock cylinder and outside handle, work through the access holes in the door to disconnect the control rods from the Door Lock Cylinder and outside Door Handle. Loosen the screw with a Torque bit and remove the lock cover and lock cylinder. To remove the outside handle, slide it to the rear, and then remove the handle. If you need to remove the outside handle assembly, disconnect the rod and door-opening cable from the handle assembly. Remove the two screws securing the frame to the door. Press on the plastic clip to release the frame. Use a screwdriver to pry off the retaining clip or remove the lock cylinder retaining bolt. The installation process for the lock cylinder and outside handle is the reverse of the removal steps. To remove the inside handle, remove the clip at the rear of the handle assembly. Pull the handle free, disconnect the cables from the inside handle control, and remove the handle. Installation is the reverse of removal.
