How to replace a blower unit in a Toyota Matrix and Pontiac Vibe?

The blower unit in a vehicle is typically located in the passenger compartment under the glove box area. If the blower is not functioning properly, it is important to check the fuse and all connections in the circuit for looseness and corrosion, as well as ensuring that the battery is fully charged. If the blower motor operates at high speed but not at lower speeds, the issue is likely a faulty blower motor resistor, which can be found under the instrument panel on the passenger side. To replace the blower, disconnect the cable from the negative terminal of the battery, lower the PCM and its bracket, disconnect the wiring connector from the blower, remove the three mounting screws, and lower the blower assembly from the housing. The fan can be removed and reused on the new blower motor. Installation is the reverse of removal.

Genuine Pontiac Vibe Blower Motor

A/C Heater Blower Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Blower Motors found

View related parts
Pontiac Vibe Motor,Blower
Part Number: 88973567
$102.26 MSRP: $214.82
You Save: $112.56 (53%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: MOTOR, A/C Evaporator Blower; Blower Motor, Fan & Motor
- Replaces: 88970276
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2008 Pontiac Vibe | ALL PURPOSE 4 DOOR, ALL PURPOSE 4 DOOR AWD, ALL PURPOSE 4 DOOR GT | 4 Cyl 1.8L
View related parts
Pontiac Vibe Blower
Part Number: 19184660
$188.19 MSRP: $319.90
You Save: $131.71 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: BLOWER, Heater Blower Motor; Blower Assembly
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2010 Pontiac Vibe | 4 DOOR AWD, ALL PURPOSE 4 DOOR, FWD GT | 4 Cyl 2.4L
View related parts
Pontiac Vibe Motor,Blower
Part Number: 19184662
Product Specifications
- Other Name: MOTOR, Heater Blower Motor; Blower Motor, Fan & Motor
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2010 Pontiac Vibe | 4 DOOR AWD, ALL PURPOSE 4 DOOR, FWD GT | 4 Cyl 1.8L, 4 Cyl 2.4L
View related parts
Pontiac Vibe Blower
Part Number: 19184661
Product Specifications
- Other Name: BLOWER, Heater Blower Motor; Blower Assembly
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2010 Pontiac Vibe | ALL PURPOSE 4 DOOR | 4 Cyl 1.8L

Pontiac Vibe Blower Motor

The Blower Motor in Pontiac Vibe is one of the automotive's parts located inside the car that act as the HVAC blower motor, designed to regulate the amount of air that enters the interior of the car. These blower motor controls are responsible for the amount of air being blown through the system of car's heater and thus can be easily adjusted by drivers to meet the right temperature inside the car. Usually situated closely, the blower motor controls are wired to a control module that may experience electrical issues or get physically damaged. With problems, signs presented are rather apparent, for instance, inability to control the heating and air conditioning units. In general, the Blower Motor is an important component, which contributes to climate and comfort regulation in Pontiac Vibe cars.

Each OEM Pontiac Vibe Blower Motor we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Pontiac Vibe Blower Motor Parts Questions & Experts Answers

Motor,Blower
88973567
Q: How to replace a blower unit in a Toyota Matrix and Pontiac Vibe?
A: The blower unit in a vehicle is typically located in the passenger compartment under the glove box area. If the blower is not functioning properly, it is important to check the fuse and all connections in the circuit for looseness and corrosion, as well as ensuring that the battery is fully charged. If the blower motor operates at high speed but not at lower speeds, the issue is likely a faulty blower motor resistor, which can be found under the instrument panel on the passenger side. To replace the blower, disconnect the cable from the negative terminal of the battery, lower the PCM and its bracket, disconnect the wiring connector from the blower, remove the three mounting screws, and lower the blower assembly from the housing. The fan can be removed and reused on the new blower motor. Installation is the reverse of removal.