My Garage
My Account
Cart
Genuine Pontiac G6 Blower Motor Resistor
Heater Blower Motor Resistor- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Blower Motor Resistors found
Pontiac G6 Resistor Assembly, Auxiliary Blower Motor
Part Number: 15831065$21.82 MSRP: $66.57You Save: $44.75 (68%)Ships in 1 Business Day
Pontiac G6 Resistor Assembly, Auxiliary A/C Blower Motor
Part Number: 23454134$135.86 MSRP: $285.41You Save: $149.55 (53%)Ships in 1-2 Business Days
Pontiac G6 Blower Motor Resistor Parts Questions & Experts Answers
- Q: How do I replace the blower motor and blower motor resistor in a Pontiac G6?A: Disconnect the cable from the negative battery terminal. Remove the insulating panel from below the dash and under the glove box in the passenger compartment, if equipped. Remove the insulating panel by pulling it down against the tension of the retaining clips. For the blower motor resistor, disconnect the electrical connector at the blower motor resistor. Remove the mounting screws securing the resistor and pull it out of the evaporator/heater core housing. Installation is the reverse of removal. Reconnect the battery. To replace the blower motor, part of the plastic housing must be cut with a sharp utility knife and the motor must be reinstalled with a factory mounting kit. Disconnect the blower motor electrical connector. Cut the plastic blower motor housing between the two concentric rings. Lower the blower motor. Installation of replacement blower motor requires a factory installation kit that includes screws and a metal ring to secure the blower motor to the housing. Before installing the screws, make sure that the motor is placed in the original position. Reconnect the battery.
