Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2006 Pontiac G6 | GT 2 DOOR CONVERTIBLE, GT 2 DOOR NOTCHBACK, GT 4 DOOR NOTCHBACK, GTP 2 DOOR CONVERTIBL, GTP 2 DOOR NOTCHBACK, SE 4 DOOR NOTCHBACK, SE1 4 DOOR NOTCHBACK | 6 Cyl 3.9L
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2007-2010 Pontiac G6 | GT 2 DOOR CONVERTIBLE, GT 2 DOOR NOTCHBACK, GT 4 DOOR NOTCHBACK, GTP 2 DOOR NOTCHBACK, GXP 2 DOOR NOTCHBACK, GXP 4 DOOR NOTCHBACK, SE 4 DOOR NOTCHBACK, SE1 2 DOOR NOTCHBACK, SE1 4 DOOR NOTCHBACK | 4 Cyl 2.4L
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2005-2006 Pontiac G6 | GT 2 DOOR CONVERTIBLE, GT 2 DOOR NOTCHBACK, GT 4 DOOR NOTCHBACK, GTP 2 DOOR CONVERTIBL, GTP 2 DOOR NOTCHBACK, SE 4 DOOR NOTCHBACK, SE1 4 DOOR NOTCHBACK | 6 Cyl 3.5L
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2006-2007 Pontiac G6 | GT 2 DOOR CONVERTIBLE, GT 2 DOOR NOTCHBACK, GT 4 DOOR NOTCHBACK, GTP 2 DOOR CONVERTIBL, GTP 2 DOOR NOTCHBACK, SE 4 DOOR NOTCHBACK, SE1 4 DOOR NOTCHBACK | 4 Cyl 2.4L
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2007-2009 Pontiac G6 | GT 2 DOOR CONVERTIBLE, GT 2 DOOR NOTCHBACK, GT 4 DOOR NOTCHBACK, GTP 2 DOOR NOTCHBACK, GXP 2 DOOR NOTCHBACK, GXP 4 DOOR NOTCHBACK, SE 4 DOOR NOTCHBACK, SE1 2 DOOR NOTCHBACK, SE1 4 DOOR NOTCHBACK | 6 Cyl 3.6L
Pontiac G6 A/C Compressor Parts Questions & Experts Answers
Q: How to remove and install an air conditioning compressor in a Pontiac G6?
A: Have the air conditioning system discharged by a dealer service department or by an automotive air conditioning shop before proceeding. Remove the drive belt. Raise the vehicle and secure it on jackstands. Remove the right front wheel. Remove the right front fender splash shield. If you're working on a 2005 to 2006 3.5L V6, remove the right radiator air deflector. Disconnect the electrical connector from the compressor clutch field coil. Disconnect the compressor refrigerant line fitting from the compressor. Discard the sealing washers. Remove the compressor mounting fasteners and remove the compressor. If a new compressor is being installed, follow the directions with the compressor regarding the draining of excess oil prior to installation. The clutch may have to be transferred from the original to the new compressor. Before connecting the refrigerant line fitting to the compressor, replace all sealing washers. The remainder of installation is the reverse of removal. Tighten the line fitting fastener and compressor mounting fasteners. Have the system evacuated, recharged, and leak tested by the shop that discharged it.