How to disconnect and install the stop light switch for Buick Skylark,Oldsmobile Omega and Pontiac Phoenix?

Disconnect the electrical lead from the brake light switch. Unscrew the switch from its mount. To install, insert the switch into its mount from the rear until the switch body is up against the mounting clip. Pull the brake pedal rearward until it stops. This will press the switch rearward in its clip and provide proper adjustment. Reconnect the electrical lead.

Genuine Oldsmobile Omega Brake Light Switch

Brake Lamp Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Brake Light Switches found

View related parts
Oldsmobile Omega Switch Assembly, Stop Lamp & Cruise
Part Number: 25524845
$15.13 MSRP: $31.78
You Save: $16.65 (53%)
ADD TO CART
Product Specifications
- Other Name: SWITCH, Stop Lamp Switch; Brake Switch, Stoplamp Switch
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1982-1984 Oldsmobile Omega | 2 DOOR, 4 DOOR, BROUGHAM 2 DOOR, BROUGHAM 4 DOOR | 4 Cyl 2.5L, 6 Cyl 2.8L
View related parts
Oldsmobile Omega Switch Asm,Stop Lamp
Part Number: 25524848
Product Specifications
- Other Name: SWITCH, Stop Lamp Switch; Stoplamp Switch
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1982-1983 Oldsmobile Omega | 2 DOOR, 4 DOOR, BROUGHAM 2 DOOR, BROUGHAM 4 DOOR | 4 Cyl 2.5L, 6 Cyl 2.8L

Oldsmobile Omega Brake Light Switch Parts Questions & Experts Answers

Switch Asm,Stop Lamp
25524848
Q: How to disconnect and install the stop light switch for Buick Skylark,Oldsmobile Omega and Pontiac Phoenix?
A: Disconnect the electrical lead from the brake light switch. Unscrew the switch from its mount. To install, insert the switch into its mount from the rear until the switch body is up against the mounting clip. Pull the brake pedal rearward until it stops. This will press the switch rearward in its clip and provide proper adjustment. Reconnect the electrical lead.