How to replace a rear bearing in an axle housing on Chevrolet Avalanche,Silverado,Suburban,Tahoe,GMC Sierra,Yukon,Yukon Denali and Yukon XL?

To remove and replace a bearing in an axle housing, first remove the axleshaft and oil seal. Use a bearing puller and slide hammer to extract the old bearing from the housing. Clean out the recess and install the new bearing using a bearing installer or a piece of pipe against the outer race. Ensure the bearing is tapped in fully. Finally, install a new oil seal and re-install the axleshaft.

How do you remove and install right Axle Shaft,Shift Fork and Wheel Bearing on 4WD and AWD Chevrolet Avalanche,Silverado,Suburban,Tahoe,GMC Sierra,Yukon,Yukon Denali and Yukon XL?

To remove and install components in the front differential of selectable 4WD systems, first, loosen the wheel lug nuts and raise the vehicle securely on jackstands. Remove the right front wheel and the differential carrier splash shield if equipped. Drain the lubricant from the front differential. For 4WD systems, unbolt the right driveaxle from the axleshaft flange and support it out of the way. Remove the front axle shift motor and, if applicable, disconnect the front stabilizer link or remove the front shock absorber/coil spring assembly. On 2500/3500 models, remove the front axle bracket bolts and slide the bracket forward for additional clearance. Support the differential carrier with a floor jack and block of wood. Remove the bolts securing the axle tube to the differential carrier and the nuts attaching the tube to its support bracket. Carefully remove the output shaft tube, ensuring no components fall out. Mount the tube in a vise and remove the internal components. Measure and remove the axleshaft bearing using a slide hammer and bearing remover attachment. For installation, install the bearing to the original depth using a bearing driver or socket, then install a new seal and deflector, lubricating the seal lips with grease. Carefully drive in the axleshaft, followed by the internal components. Apply RTV sealant to the tube-to-differential housing mating surface, and install the tube assembly, tightening bolts and nuts to specified torques. Reinstall the driveaxle, front axle shift motor, and fill the differential with lubricant. For AWD systems, remove the stabilizer bar link and, if applicable, the front shock absorber. Unbolt the right driveaxle from the axleshaft flange, supporting it properly. Support the differential carrier with a floor jack and a block of wood. Remove nuts attaching the axle shaft to its support bracket and the bolts securing the axle shaft flange to the differential carrier. Use a brass punch and hammer to separate the axle shaft from the differential case side gear. Remove the inner axle shaft assembly and axle shaft. Replace the inner seal and bearing with a special tool, then apply RTV sealant to the differential sealing surface and install the inner axle shaft housing assembly. Install the axle shaft to the support bracket and align the splines with the differential side gear. Tap the axle shaft with a mallet until the ring (clip) aligns with the groove in the differential case side gear. Install the axle shaft to the inner flange and tighten the bolts. Reinstall the stabilizer link, fill the differential with lubricant, install the differential carrier splash shield, and finally, install the wheel and lug nuts. Lower the vehicle, tighten the lug nuts, and check for proper operation.

How to remove and install a rear hub assembly,Wheel Bearing and Wheel Seal for Chevrolet Avalanche,Silverado,Suburban,Tahoe,GMC Sierra,Yukon,Yukon Denali and Yukon XL?

To remove and install a rear hub assembly, first remove the axleshaft and rear wheels, then remove the brake disc and retaining ring/key from the end of the axle housing. Use a special socket to remove the adjusting nut and pull the hub assembly straight off the axle tube. Discard the oil seal and clean and inspect all components for wear or damage. Disassemble the hub further if necessary, then clean and reassemble using new bearing cups and lubricating with wheel bearing grease. To install, place the hub assembly on the axle tube and adjust the bearings by tightening the adjusting nut to 50 ft-lbs, then backing it off and tightening it hand-tight. Install the key and retaining ring, and ensure there is no play in the hub assembly before reinstalling the axleshaft and lowering the vehicle.

How to replace and install the front Wheel Bearing and Wheel Seal of 4WD Chevrolet Avalanche,Silverado,Suburban,Tahoe,GMC Sierra,Yukon,Yukon Denali and Yukon XL?

To remove the left side of a vehicle, first loosen the wheel lug nuts, raise the vehicle, place it securely on jackstands, and remove the left front wheel. Then, remove the differential carrier splash shield from under the front axle and the left driveaxle. Drain the lubricant from the front differential and pull the left axle shaft out with a slide hammer and adapter. Remove the deflector and seal from the differential and remove the bearing using a slide hammer and bearing remover attachment. To install the left side, first install the bearing with the square shoulder facing in, using a bearing driver or a socket with an outside diameter slightly smaller than that of the bearing. Then, install a new seal and deflector, lubricating the lips of the seal with multi-purpose grease. Carefully drive in the axle shaft with a soft-face hammer and fill the differential with the proper lubricant. Install the driveaxle and differential carrier splash shield, then install the wheel and lug nuts. Lower the vehicle, tighten the lug nuts to the proper torque specifications, and check for proper operation.

Genuine GMC Sierra Wheel Bearing

Hub Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

39 Wheel Bearings found

View related parts
GMC Sierra Rear Wheel Bearing
Part Number: 12479031
$46.59 MSRP: $92.44
You Save: $45.85 (50%)
ADD TO CART
Product Specifications
- Other Name: Bearing,Rear Wheel
- Position: Rear
- Replaces: 09442126, 9442126
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2024 GMC Sierra | 1500 CREW CAB, 1500 CREW CAB LONG BOX, 1500 CREW CAB STANDARD BOX, 1500 DOUBLE CAB STANDARD BOX, 1500 EXTENDED CAB LONG BOX, 1500 EXTENDED CAB SHORT BOX, 1500 EXTENDED CAB STANDARD BOX, 1500 REGULAR CAB LONG BOX, 1500 REGULAR CAB STANDARD BOX, CLASSIC 1500 CREW CAB LONG BOX, CLASSIC 1500 CREW CAB STANDARD BOX, CLASSIC 1500 EXTENDED CAB LONG BOX, CLASSIC 1500 EXTENDED CAB SHORT BOX, CLASSIC 1500 EXTENDED CAB STANDARD BOX, CLASSIC 1500 REGULAR CAB LONG BOX, CLASSIC 1500 REGULAR CAB STANDARD BOX, CREW CAB 1/2 TON, CREW CAB 5'8" 1/2 TON, CREW CAB 5'8" BOX 1/2 TON, Crew Cab 6'6" Box 1/2 Ton, CREW CAB 6'6" BOX 1/2 TON, EXTENDED CAB 5'8" BOX 1/2 TON, EXTENDED CAB 6'6" BOX 1/2 TON, EXTENDED CAB 8' BOX 1/2 TON, REGULAR CAB 6'6" BOX 1/2 TON, REGULAR CAB 8' BOX 1/2 TON | 4 Cyl 2.7L, 6 Cyl 3.0L Diesel, 6 CYL 3.0L Diesel, 6 Cyl 4.3L, 8 Cyl 4.8L, 8 Cyl 4.8L Flex, 8 Cyl 5.3L, 8 Cyl 5.3L Flex, 8 Cyl 6.0L, 8 Cyl 6.0L Flex, 8 Cyl 6.2L, 8 Cyl 6.2L Flex, 8 Cyl5.3L
View related parts
GMC Sierra Rear Wheel Bearing
Part Number: 9439561
$72.20 MSRP: $131.28
You Save: $59.08 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing,Rear Wheel
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2007 GMC Sierra | 1500 CREW CAB LONG BOX, 1500 CREW CAB STANDARD BOX, 2500 CREW CAB LONG BOX, 2500 CREW CAB STANDARD BOX, 2500 EXTENDED CAB LONG BOX, 2500 EXTENDED CAB STANDARD BOX, 2500 REGULAR CAB, CLASSIC 1500 CREW CAB LONG BOX, CLASSIC 1500 CREW CAB STANDARD BOX | 6 Cyl 4.3L, 8 Cyl 4.8L, 8 Cyl 5.3L, 8 Cyl 5.3L Flex, 8 Cyl 6.0L, 8 Cyl 6.6L Diesel, 8 Cyl 8.1L
View related parts
GMC Sierra Front Wheel Bearing (W/ Brg & Whl Spd Sen)
Part Number: 84459706
$217.83 MSRP: $449.71
You Save: $231.88 (52%)
ADD TO CART
Product Specifications
- Other Name: Hub Assembly, Front Whl (W/ Brg & Whl Spd Sen); Front Hub, Hub & Bearing
- Position: Front
- Replaces: 25807422, 84199405, 23203924
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011-2019 GMC Sierra | 1 TON CREW CAB, 3500 CREW CAB LONG BOX, 3500 CREW CAB ONLY, 3500 CREW CAB STANDARD BOX, 3500 DOUBLE CAB LONG BOX, 3500 REGULAR CAB, CREW CAB 1 TON, CREW CAB 1 TON 137.0, EXTENDED CAB 1 TON, EXTENDED CAB CHASSIS 1 TON 161.5, REGULAR CAB 1 TON, REGULAR CAB CHASSIS 1 TON 137.0, REGULAR CAB CHASSIS 1 TON 161.5 | 8 Cyl 6.0L, 8 Cyl 6.0L Flex, 8 Cyl 6.6L Diesel
View related parts
GMC Sierra Rear Wheel Bearing
Part Number: 9428908
$53.92 MSRP: $98.04
You Save: $44.12 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing,Rear Wheel Outer
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2010 GMC Sierra | 2500 CREW CAB LONG BOX, 2500 CREW CAB STANDARD BOX, 2500 EXTENDED CAB LONG BOX, 2500 EXTENDED CAB STANDARD BOX, 2500 REGULAR CAB, 3500 CREW CAB, 3500 EXTENDED CAB, 3500 REGULAR CAB, CLASSIC 2500 CREW CAB LONG BOX, CLASSIC 2500 CREW CAB STANDARD BOX, CLASSIC 2500 EXTENDED CAB LONG BOX, CLASSIC 2500 EXTENDED CAB STANDARD BOX, CLASSIC 2500 REGULAR CAB, CLASSIC 3500 CREW CAB, CLASSIC 3500 EXTENDED CAB, CLASSIC 3500 REGULAR CAB, CREW CAB 1 TON, CREW CAB 6'6" BOX 3/4 TON, CREW CAB 8' BOX 3/4 TON, EXTENDED CAB 1 TON, EXTENDED CAB 6'6" BOX 3/4 TON, EXTENDED CAB 8' BOX 3/4 TON, EXTENDED CAB CHASSIS 1 TON 161.5, REGULAR CAB 1 TON, REGULAR CAB 3/4 TON, REGULAR CAB CHASSIS 1 TON 137.0, REGULAR CAB CHASSIS 1 TON 161.5 | 8 Cyl 5.3L, 8 Cyl 6.0L, 8 Cyl 6.0L Flex, 8 Cyl 6.6L Diesel, 8 Cyl 8.1L
View related parts
GMC Sierra Rear Wheel Bearing
Part Number: 25855296
$56.60 MSRP: $112.30
You Save: $55.70 (50%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing Assembly, Rear Wheel Outer ; Bearing, Rear Wheel; Outer Bearing, Shaft Bearing
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011-2024 GMC Sierra | 1 TON CREW CAB, 2500 CREW CAB STANDARD BOX, 2500 REGULAR CAB, 2500 REGULAR CAB STANDARD BOX, 3500 CREW CAB LONG BOX, 3500 CREW CAB ONLY, 3500 CREW CAB STANDARD BOX, 3500 DOUBLE CAB LONG BOX, 3500 REGULAR CAB, CREW CAB 1 TON, CREW CAB 1 TON 119.0, CREW CAB 1 TON 137.0, CREW CAB 2500 LONG BOX, CREW CAB 6'6" BOX 1 TON, CREW CAB 6'6" BOX 3/4 TON, CREW CAB 8' BOX 1 TON, CREW CAB 8' BOX 3/4 TON, DOUBLE CAB 2500 LONG BOX, DOUBLE CAB 2500 STANDARD BOX, EXTENDED CAB 1 TON, EXTENDED CAB 6'6" BOX 3/4 TON, EXTENDED CAB 8' BOX 1 TON, EXTENDED CAB 8' BOX 3/4 TON, EXTENDED CAB CHASSIS 1 TON 161.5, EXTENDED CREW CAB 1 TON 161.5, REGULAR CAB 1 TON, REGULAR CAB 3/4 TON, REGULAR CAB 8' BOX 1 TON, REGULAR CAB 8' BOX 3/4 TON, REGULAR CAB CHASSIS 1 TON 137.0, REGULAR CAB CHASSIS 1 TON 161.5 | 8 Cyl 6.0L, 8 Cyl 6.0L Flex, 8 Cyl 6.6L, 8 Cyl 6.6L Diesel
View related parts
GMC Sierra Rear Wheel Bearing
Part Number: 15042154
$40.80 MSRP: $80.96
You Save: $40.16 (50%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing Assembly, Rear Wheel Outer ; Bearing, Rear Wheel; Outer Bearing, Wheel Bearing
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2010 GMC Sierra | 3500 CHASSIS EXTENDED CAB 161.5, 3500 CHASSIS EXTENDED CAB 185.5, 3500 CHASSIS REGULAR CAB 137.0, 3500 CHASSIS REGULAR CAB 161.5, 3500 CREW CAB, 3500 EXTENDED CAB, 3500 REGULAR CAB, CLASSIC 3500 CHASSIS EXTENDED CAB 161.5, CLASSIC 3500 CHASSIS REGULAR CAB 137.0, CLASSIC 3500 CHASSIS REGULAR CAB 161.5, CLASSIC 3500 CREW CAB, CLASSIC 3500 EXTENDED CAB, CLASSIC 3500 REGULAR CAB, CREW CAB 1 TON, EXTENDED CAB 1 TON, EXTENDED CAB CHASSIS 1 TON 161.5, REGULAR CAB 1 TON, REGULAR CAB CHASSIS 1 TON 137.0, REGULAR CAB CHASSIS 1 TON 161.5 | 6 Cyl 4.3L, 8 Cyl 4.8L, 8 Cyl 5.3L, 8 Cyl 6.0L, 8 Cyl 6.0L Flex, 8 Cyl 6.6L Diesel, 8 Cyl 8.1L
View related parts
GMC Sierra Rear Wheel Bearing
Part Number: 25843093
$158.68 MSRP: $484.38
You Save: $325.70 (68%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub Assembly, Rear Wheel ; Hub, Rear Wheel; Hub
- Position: Rear
- Replaces: 15712805, 15829645
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2010 GMC Sierra | 2500 CREW CAB LONG BOX, 2500 CREW CAB STANDARD BOX, 2500 EXTENDED CAB LONG BOX, 2500 EXTENDED CAB STANDARD BOX, 2500 REGULAR CAB, 3500 CHASSIS EXTENDED CAB 161.5, 3500 CHASSIS REGULAR CAB 137.0, 3500 CHASSIS REGULAR CAB 161.5, 3500 CREW CAB, 3500 EXTENDED CAB, 3500 REGULAR CAB, CLASSIC 2500 CREW CAB LONG BOX, CLASSIC 2500 CREW CAB STANDARD BOX, CLASSIC 2500 EXTENDED CAB LONG BOX, CLASSIC 2500 EXTENDED CAB STANDARD BOX, CLASSIC 2500 REGULAR CAB, CLASSIC 3500 CHASSIS EXTENDED CAB 161.5, CLASSIC 3500 CHASSIS REGULAR CAB 137.0, CLASSIC 3500 CHASSIS REGULAR CAB 161.5, CLASSIC 3500 CREW CAB, CLASSIC 3500 EXTENDED CAB, CLASSIC 3500 REGULAR CAB, CREW CAB 1 TON, CREW CAB 6'6" BOX 3/4 TON, CREW CAB 8' BOX 3/4 TON, EXTENDED CAB 1 TON, EXTENDED CAB 6'6" BOX 3/4 TON, EXTENDED CAB 8' BOX 3/4 TON, REGULAR CAB 1 TON, REGULAR CAB 3/4 TON | 8 Cyl 5.3L, 8 Cyl 6.0L, 8 Cyl 6.0L Flex, 8 Cyl 6.6L Diesel, 8 Cyl 8.1L
View related parts
GMC Sierra Rear Wheel Bearing
Part Number: 23455948
$256.38 MSRP: $508.69
You Save: $252.31 (50%)
ADD TO CART
Product Specifications
- Other Name: Hub Assembly, Rear Wheel; Hub
- Position: Rear
- Replaces: 20945051
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011-2019 GMC Sierra | 3500 CREW CAB LONG BOX, 3500 CREW CAB ONLY, 3500 DOUBLE CAB LONG BOX, 3500 REGULAR CAB, CREW CAB 1 TON, CREW CAB 1 TON 137.0, EXTENDED CAB 1 TON, EXTENDED CAB CHASSIS 1 TON 161.5, EXTENDED CREW CAB 1 TON 161.5, REGULAR CAB 1 TON, REGULAR CAB CHASSIS 1 TON 137.0, REGULAR CAB CHASSIS 1 TON 161.5 | 8 Cyl 6.0L, 8 Cyl 6.0L Flex, 8 Cyl 6.6L Diesel
View related parts
GMC Sierra Rear Wheel Bearing
Part Number: 20945052
$186.64 MSRP: $370.29
You Save: $183.65 (50%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub Assembly, Rear Wheel ; Hub, Rear Wheel; Hub
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011-2019 GMC Sierra | 1 TON CREW CAB, 2500 CREW CAB STANDARD BOX, 2500 REGULAR CAB, 2500 REGULAR CAB STANDARD BOX, 3500 CREW CAB LONG BOX, 3500 CREW CAB STANDARD BOX, 3500 DOUBLE CAB LONG BOX, 3500 REGULAR CAB, CREW CAB 1 TON, CREW CAB 1 TON 119.0, CREW CAB 2500 LONG BOX, CREW CAB 6'6" BOX 3/4 TON, CREW CAB 8' BOX 3/4 TON, DOUBLE CAB 2500 LONG BOX, DOUBLE CAB 2500 STANDARD BOX, EXTENDED CAB 1 TON, EXTENDED CAB 6'6" BOX 3/4 TON, EXTENDED CAB 8' BOX 3/4 TON, REGULAR CAB 1 TON, REGULAR CAB 3/4 TON | 8 Cyl 6.0L, 8 Cyl 6.0L Flex, 8 Cyl 6.6L Diesel
View related parts
GMC Sierra Wheel Bearing
Part Number: 15042155
$48.70 MSRP: $96.62
You Save: $47.92 (50%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing Assembly, Rear Wheel Inner ; Bearing, Rear Wheel; Inner Bearing
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2010 GMC Sierra | 3500 CHASSIS EXTENDED CAB 161.5, 3500 CHASSIS EXTENDED CAB 185.5, 3500 CHASSIS REGULAR CAB 137.0, 3500 CHASSIS REGULAR CAB 161.5, 3500 CREW CAB, 3500 EXTENDED CAB, 3500 REGULAR CAB, CLASSIC 3500 CHASSIS EXTENDED CAB 161.5, CLASSIC 3500 CHASSIS REGULAR CAB 137.0, CLASSIC 3500 CHASSIS REGULAR CAB 161.5, CLASSIC 3500 CREW CAB, CLASSIC 3500 EXTENDED CAB, CLASSIC 3500 REGULAR CAB, CREW CAB 1 TON, EXTENDED CAB 1 TON, EXTENDED CAB CHASSIS 1 TON 161.5, REGULAR CAB 1 TON, REGULAR CAB CHASSIS 1 TON 137.0, REGULAR CAB CHASSIS 1 TON 161.5 | 6 Cyl 4.3L, 8 Cyl 4.8L, 8 Cyl 5.3L, 8 Cyl 6.0L, 8 Cyl 6.0L Flex, 8 Cyl 6.6L Diesel, 8 Cyl 8.1L
View related parts
GMC Sierra Wheel Hub, Front
Part Number: 22740470
$281.62 MSRP: $859.64
You Save: $578.02 (68%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub Assembly, Front Wheel (W/ Bearing & Wheel Speed Sensor) ; Hub, Front Wheel; Front Hub, Hub & Bearing
- Position: Front
- Replaces: 15910969, 20836877
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2010 GMC Sierra | CREW CAB 1 TON, EXTENDED CAB 1 TON, EXTENDED CAB CHASSIS 1 TON 161.5, REGULAR CAB 1 TON, REGULAR CAB CHASSIS 1 TON 137.0, REGULAR CAB CHASSIS 1 TON 161.5 | 8 Cyl 6.0L, 8 Cyl 6.0L Flex, 8 Cyl 6.6L Diesel
View related parts
GMC Sierra Front Wheel Bearing
Part Number: 26041515
$27.08 MSRP: $51.10
You Save: $24.02 (48%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Bearing,Front Drive Axle Inner Shaft; Inner Pinion Bearing, Output Shaft Bearing
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2019 GMC Sierra | 1500 CREW CAB LONG BOX, 1500 CREW CAB STANDARD BOX, 1500 DOUBLE CAB STANDARD BOX, 1500 EXTENDED CAB LONG BOX, 1500 EXTENDED CAB SHORT BOX, 1500 EXTENDED CAB STANDARD BOX, 1500 REGULAR CAB LONG BOX, 1500 REGULAR CAB STANDARD BOX, CLASSIC 1500 CREW CAB LONG BOX, CLASSIC 1500 CREW CAB STANDARD BOX, CLASSIC 1500 EXTENDED CAB LONG BOX, CLASSIC 1500 EXTENDED CAB SHORT BOX, CLASSIC 1500 EXTENDED CAB STANDARD BOX, CLASSIC 1500 REGULAR CAB LONG BOX, CLASSIC 1500 REGULAR CAB STANDARD BOX, CREW CAB 1/2 TON, EXTENDED CAB 5'8" BOX 1/2 TON, EXTENDED CAB 6'6" BOX 1/2 TON, EXTENDED CAB 8' BOX 1/2 TON, REGULAR CAB 6'6" BOX 1/2 TON, REGULAR CAB 8' BOX 1/2 TON | 6 Cyl 4.3L, 8 Cyl 4.8L, 8 Cyl 4.8L Flex, 8 Cyl 5.3L, 8 Cyl 5.3L Flex, 8 Cyl 6.0L, 8 Cyl 6.0L Flex, 8 Cyl 6.2L, 8 Cyl 6.2L Flex
View related parts
GMC Sierra Front Wheel Bearing
Part Number: 26066885
$28.67 MSRP: $54.10
You Save: $25.43 (48%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing,Front Drive Axle Inner Shaft; Inner Pinion Bearing, Output Shaft Bearing
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2019 GMC Sierra | 1500 CREW CAB LONG BOX, 1500 CREW CAB STANDARD BOX, 1500 DOUBLE CAB STANDARD BOX, 1500 EXTENDED CAB LONG BOX, 1500 EXTENDED CAB SHORT BOX, 1500 EXTENDED CAB STANDARD BOX, 1500 REGULAR CAB LONG BOX, 1500 REGULAR CAB STANDARD BOX, CLASSIC 1500 CREW CAB LONG BOX, CLASSIC 1500 CREW CAB STANDARD BOX, CLASSIC 1500 EXTENDED CAB LONG BOX, CLASSIC 1500 EXTENDED CAB SHORT BOX, CLASSIC 1500 EXTENDED CAB STANDARD BOX, CLASSIC 1500 REGULAR CAB LONG BOX, CLASSIC 1500 REGULAR CAB STANDARD BOX, CREW CAB 1/2 TON, EXTENDED CAB 5'8" BOX 1/2 TON, EXTENDED CAB 6'6" BOX 1/2 TON, EXTENDED CAB 8' BOX 1/2 TON, REGULAR CAB 6'6" BOX 1/2 TON, REGULAR CAB 8' BOX 1/2 TON | 6 Cyl 4.3L, 8 Cyl 4.8L, 8 Cyl 4.8L Flex, 8 Cyl 5.3L, 8 Cyl 5.3L Flex, 8 Cyl 6.0L, 8 Cyl 6.0L Flex, 8 Cyl 6.2L, 8 Cyl 6.2L Flex
View related parts
GMC Sierra Differential Bearing
Part Number: 9436881
$75.24 MSRP: $145.36
You Save: $70.12 (49%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing,Differential
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2019 GMC Sierra | 2500 CREW CAB LONG BOX, 2500 CREW CAB STANDARD BOX, 2500 EXTENDED CAB LONG BOX, 2500 EXTENDED CAB STANDARD BOX, 2500 REGULAR CAB, 2500 REGULAR CAB STANDARD BOX, 3500 CHASSIS EXTENDED CAB 161.5, 3500 CHASSIS EXTENDED CAB 185.5, 3500 CHASSIS REGULAR CAB 137.0, 3500 CHASSIS REGULAR CAB 161.5, 3500 CREW CAB, 3500 EXTENDED CAB, 3500 REGULAR CAB, CLASSIC 2500 CREW CAB LONG BOX, CLASSIC 2500 CREW CAB STANDARD BOX, CLASSIC 2500 EXTENDED CAB LONG BOX, CLASSIC 2500 EXTENDED CAB STANDARD BOX, CLASSIC 2500 REGULAR CAB, CLASSIC 3500 CHASSIS EXTENDED CAB 161.5, CLASSIC 3500 CHASSIS REGULAR CAB 137.0, CLASSIC 3500 CHASSIS REGULAR CAB 161.5, CLASSIC 3500 CREW CAB, CLASSIC 3500 EXTENDED CAB, CLASSIC 3500 REGULAR CAB, CREW CAB 1 TON, CREW CAB 2500 LONG BOX, CREW CAB 6'6" BOX 3/4 TON, CREW CAB 8' BOX 3/4 TON, DOUBLE CAB 2500 LONG BOX, DOUBLE CAB 2500 STANDARD BOX, EXTENDED CAB 1 TON, EXTENDED CAB 6'6" BOX 3/4 TON, EXTENDED CAB 8' BOX 3/4 TON, REGULAR CAB 1 TON, REGULAR CAB 3/4 TON | 6 Cyl 4.3L, 8 Cyl 4.8L, 8 Cyl 5.3L, 8 Cyl 6.0L, 8 Cyl 6.0L Flex, 8 Cyl 6.6L Diesel, 8 Cyl 8.1L
View related parts
GMC Sierra Hub Assembly, Front Whl (W/ Brg & Whl Spd Sen)
Part Number: 84869190
$171.73 MSRP: $340.74
You Save: $169.01 (50%)
ADD TO CART
Product Specifications
- Position: Front
- Replaced by: 85689422
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2019 GMC Sierra | 1500 CREW CAB STANDARD BOX, 1500 DOUBLE CAB STANDARD BOX, 1500 REGULAR CAB LONG BOX, 1500 REGULAR CAB STANDARD BOX, CREW CAB 1/2 TON | 6 Cyl 4.3L, 8 Cyl 5.3L, 8 Cyl 6.2L
View related parts
GMC Sierra Hub Assembly, Front Whl (W/ Brg & Whl Spd Sen)
Part Number: 84964448
$207.38 MSRP: $373.68
You Save: $166.30 (45%)
ADD TO CART
Product Specifications
- Other Name: Hub & Bearing
- Position: Front
- Replaces: 84459703, 84199397, 23203922, 25807420
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011-2019 GMC Sierra | 1 TON CREW CAB, 2500 CREW CAB STANDARD BOX, 2500 REGULAR CAB, 3500 CREW CAB LONG BOX, 3500 CREW CAB ONLY, 3500 CREW CAB STANDARD BOX, 3500 DOUBLE CAB LONG BOX, 3500 REGULAR CAB, CREW CAB 1 TON, CREW CAB 1 TON 137.0, CREW CAB 2500 LONG BOX, CREW CAB 6'6" BOX 3/4 TON, CREW CAB 8' BOX 3/4 TON, DOUBLE CAB 2500 LONG BOX, DOUBLE CAB 2500 STANDARD BOX, EXTENDED CAB 1 TON, EXTENDED CAB 6'6" BOX 3/4 TON, EXTENDED CAB 8' BOX 3/4 TON, EXTENDED CAB CHASSIS 1 TON 161.5, REGULAR CAB 1 TON, REGULAR CAB 3/4 TON, REGULAR CAB CHASSIS 1 TON 137.0, REGULAR CAB CHASSIS 1 TON 161.5 | 8 Cyl 6.0L, 8 Cyl 6.0L Flex, 8 Cyl 6.6L Diesel
View related parts
GMC Sierra Wheel Bearing
Part Number: 25855295
$70.59 MSRP: $140.06
You Save: $69.47 (50%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing Assembly, Rear Wheel Inner ; Bearing, Rear Wheel; Axle Bearing, Inner Bearing, Shaft Bearing
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011-2024 GMC Sierra | 1 TON CREW CAB, 2500 CREW CAB STANDARD BOX, 2500 REGULAR CAB, 2500 REGULAR CAB STANDARD BOX, 3500 CREW CAB LONG BOX, 3500 CREW CAB ONLY, 3500 CREW CAB STANDARD BOX, 3500 DOUBLE CAB LONG BOX, 3500 REGULAR CAB, CREW CAB 1 TON, CREW CAB 1 TON 119.0, CREW CAB 1 TON 137.0, CREW CAB 2500 LONG BOX, CREW CAB 6'6" BOX 1 TON, CREW CAB 6'6" BOX 3/4 TON, CREW CAB 8' BOX 1 TON, CREW CAB 8' BOX 3/4 TON, DOUBLE CAB 2500 LONG BOX, DOUBLE CAB 2500 STANDARD BOX, EXTENDED CAB 1 TON, EXTENDED CAB 6'6" BOX 3/4 TON, EXTENDED CAB 8' BOX 1 TON, EXTENDED CAB 8' BOX 3/4 TON, EXTENDED CAB CHASSIS 1 TON 161.5, EXTENDED CREW CAB 1 TON 161.5, REGULAR CAB 1 TON, REGULAR CAB 3/4 TON, REGULAR CAB 8' BOX 1 TON, REGULAR CAB 8' BOX 3/4 TON, REGULAR CAB CHASSIS 1 TON 137.0, REGULAR CAB CHASSIS 1 TON 161.5 | 8 Cyl 6.0L, 8 Cyl 6.0L Flex, 8 Cyl 6.6L, 8 Cyl 6.6L Diesel
View related parts
GMC Sierra Front Wheel Bearing (W/ Brg & Whl Spd Sen)
Part Number: 84459697
$217.45 MSRP: $431.44
You Save: $213.99 (50%)
ADD TO CART
Product Specifications
- Other Name: Hub Assembly, Front Whl (W/ Brg & Whl Spd Sen); Front Hub, Hub & Bearing
- Position: Front
- Replaces: 22762440, 25807419, 20873257
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011-2019 GMC Sierra | 2500 CREW CAB STANDARD BOX, 2500 REGULAR CAB, 2500 REGULAR CAB STANDARD BOX, 3500 CREW CAB LONG BOX, 3500 CREW CAB ONLY, 3500 CREW CAB STANDARD BOX, 3500 DOUBLE CAB LONG BOX, 3500 REGULAR CAB, CREW CAB 1 TON, CREW CAB 1 TON 119.0, CREW CAB 2500 LONG BOX, CREW CAB 6'6" BOX 3/4 TON, CREW CAB 8' BOX 3/4 TON, DOUBLE CAB 2500 LONG BOX, DOUBLE CAB 2500 STANDARD BOX, EXTENDED CAB 1 TON, EXTENDED CAB 6'6" BOX 3/4 TON, EXTENDED CAB 8' BOX 3/4 TON, EXTENDED CAB CHASSIS 1 TON 161.5, EXTENDED CREW CAB 1 TON 161.5, REGULAR CAB 1 TON, REGULAR CAB 3/4 TON, REGULAR CAB CHASSIS 1 TON 137.0, REGULAR CAB CHASSIS 1 TON 161.5 | 8 Cyl 6.0L, 8 Cyl 6.0L Flex, 8 Cyl 6.6L Diesel
View related parts
GMC Sierra Rear Wheel Bearing
Part Number: 15894423
$219.14 MSRP: $394.84
You Save: $175.70 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub Assembly, Rear Wheel ; Hub, Rear Wheel; Hub
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2010 GMC Sierra | CREW CAB 6'6" BOX 3/4 TON, EXTENDED CAB 6'6" BOX 3/4 TON | 8 Cyl 6.0L, 8 Cyl 6.0L Flex, 8 Cyl 6.6L Diesel
View related parts
GMC Sierra HUB ASM,FRT WHL (W/ BRG & WHL SPD SEN)
Part Number: 19419502
$314.85 MSRP: $624.72
You Save: $309.87 (50%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Front Hub, Hub & Bearing
- Replaces: 15225752, 89059058, 89059060, 15225753, 15056760, 15946733, 15056753
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2007 GMC Sierra | 3500 CHASSIS EXTENDED CAB 161.5, 3500 CHASSIS EXTENDED CAB 185.5, 3500 CHASSIS REGULAR CAB 137.0, 3500 CHASSIS REGULAR CAB 161.5, 3500 CREW CAB, 3500 EXTENDED CAB, 3500 REGULAR CAB, CLASSIC 3500 CHASSIS EXTENDED CAB 161.5, CLASSIC 3500 CHASSIS REGULAR CAB 137.0, CLASSIC 3500 CHASSIS REGULAR CAB 161.5, CLASSIC 3500 CREW CAB, CLASSIC 3500 EXTENDED CAB, CLASSIC 3500 REGULAR CAB | 6 Cyl 4.3L, 8 Cyl 4.8L, 8 Cyl 5.3L, 8 Cyl 6.0L, 8 Cyl 6.6L Diesel, 8 Cyl 8.1L

| Page 1 of 2 |Next >

1-20 of 39 Results

GMC Sierra Wheel Bearing

The Wheel Bearing of GMC Sierra cars are very important part of the car to support the rotation of the wheels that shows both the aspect of working principle and safety. Due to different arrangements of the hub and bearing, there are 3 sets with the most common type being the Unit assembly with the ABS sensor. Worn or loose bearings are some of the causes that lead to noise and vibration which in bad consequences lead to wheel loss. These couplings require frequent examination for roughness, play, and indications of wear and tear and need to be lubricated frequently also. Tapered roller bearings with other RHP bearings are change out type, which have to be cleaned up and injecting high-quality grease from packing before being reassembled. In summary, the wheel bearing is an essential part to ensure that GMC Sierra drivers enjoy a smooth ride and no vibrations.

Each OEM GMC Sierra Wheel Bearing we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

GMC Sierra Wheel Bearing Parts Questions & Experts Answers

Differential Bearing
9436881
Q: How to replace a rear bearing in an axle housing on Chevrolet Avalanche,Silverado,Suburban,Tahoe,GMC Sierra,Yukon,Yukon Denali and Yukon XL?
A: To remove and replace a bearing in an axle housing, first remove the axleshaft and oil seal. Use a bearing puller and slide hammer to extract the old bearing from the housing. Clean out the recess and install the new bearing using a bearing installer or a piece of pipe against the outer race. Ensure the bearing is tapped in fully. Finally, install a new oil seal and re-install the axleshaft.
Rear Wheel Bearing
15715055
Q: How do you remove and install right Axle Shaft,Shift Fork and Wheel Bearing on 4WD and AWD Chevrolet Avalanche,Silverado,Suburban,Tahoe,GMC Sierra,Yukon,Yukon Denali and Yukon XL?
A: To remove and install components in the front Differential of selectable 4WD systems, first, loosen the wheel lug nuts and raise the vehicle securely on jackstands. Remove the right front wheel and the differential carrier splash shield if equipped. Drain the lubricant from the front differential. For 4WD systems, unbolt the right driveaxle from the axleshaft flange and support it out of the way. Remove the front axle shift motor and, if applicable, disconnect the front stabilizer link or remove the front shock absorber/coil spring assembly. On 2500/3500 models, remove the front axle bracket bolts and slide the bracket forward for additional clearance. Support the differential carrier with a floor jack and block of wood. Remove the bolts securing the axle tube to the differential carrier and the nuts attaching the tube to its support bracket. Carefully remove the output shaft tube, ensuring no components fall out. Mount the tube in a vise and remove the internal components. Measure and remove the axleshaft bearing using a slide hammer and bearing remover attachment. For installation, install the bearing to the original depth using a bearing driver or socket, then install a new seal and deflector, lubricating the seal lips with grease. Carefully drive in the axleshaft, followed by the internal components. Apply RTV sealant to the tube-to-differential housing mating surface, and install the tube assembly, tightening bolts and nuts to specified torques. Reinstall the driveaxle, front axle shift motor, and fill the differential with lubricant. For AWD systems, remove the stabilizer bar link and, if applicable, the front shock absorber. Unbolt the right driveaxle from the axleshaft flange, supporting it properly. Support the differential carrier with a floor jack and a block of wood. Remove nuts attaching the axle shaft to its support bracket and the bolts securing the axle shaft flange to the differential carrier. Use a brass punch and hammer to separate the axle shaft from the differential case side gear. Remove the inner axle shaft assembly and axle shaft. Replace the inner seal and bearing with a special tool, then apply RTV sealant to the differential sealing surface and install the inner axle shaft housing assembly. Install the axle shaft to the support bracket and align the splines with the differential side gear. Tap the axle shaft with a mallet until the ring (clip) aligns with the groove in the differential case side gear. Install the axle shaft to the inner flange and tighten the bolts. Reinstall the stabilizer link, fill the differential with lubricant, install the differential carrier splash shield, and finally, install the wheel and lug nuts. Lower the vehicle, tighten the lug nuts, and check for proper operation.
Rear Wheel Bearing
15042154
Q: How to remove and install a rear hub assembly,Wheel Bearing and Wheel Seal for Chevrolet Avalanche,Silverado,Suburban,Tahoe,GMC Sierra,Yukon,Yukon Denali and Yukon XL?
A: To remove and install a rear hub assembly, first remove the axleshaft and rear wheels, then remove the brake disc and retaining ring/key from the end of the axle housing. Use a special socket to remove the adjusting nut and pull the hub assembly straight off the axle tube. Discard the oil seal and clean and inspect all components for wear or damage. Disassemble the hub further if necessary, then clean and reassemble using new bearing cups and lubricating with wheel bearing grease. To install, place the hub assembly on the axle tube and adjust the bearings by tightening the adjusting nut to 50 ft-lbs, then backing it off and tightening it hand-tight. Install the key and retaining ring, and ensure there is no play in the hub assembly before reinstalling the axleshaft and lowering the vehicle.
Wheel Bearing
15042155
Q: How to replace and install the front Wheel Bearing and Wheel Seal of 4WD Chevrolet Avalanche,Silverado,Suburban,Tahoe,GMC Sierra,Yukon,Yukon Denali and Yukon XL?
A: To remove the left side of a vehicle, first loosen the wheel lug nuts, raise the vehicle, place it securely on jackstands, and remove the left front wheel. Then, remove the differential carrier splash shield from under the front axle and the left driveaxle. Drain the lubricant from the front differential and pull the left Axle Shaft out with a slide hammer and adapter. Remove the deflector and seal from the differential and remove the bearing using a slide hammer and bearing remover attachment. To install the left side, first install the bearing with the square shoulder facing in, using a bearing driver or a socket with an outside diameter slightly smaller than that of the bearing. Then, install a new seal and deflector, lubricating the lips of the seal with multi-purpose grease. Carefully drive in the axle shaft with a soft-face hammer and fill the differential with the proper lubricant. Install the driveaxle and differential carrier splash shield, then install the wheel and lug nuts. Lower the vehicle, tighten the lug nuts to the proper torque specifications, and check for proper operation.