Other Name: PUMP, Power Steering; Power Steering Pump
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2004-2007 GMC Sierra | 1500 EXTENDED CAB LONG BOX, 1500 EXTENDED CAB STANDARD BOX, CLASSIC 1500 EXTENDED CAB STANDARD BOX | 6 Cyl 4.3L, 8 Cyl 4.8L, 8 Cyl 5.3L, 8 Cyl 5.3L Flex, 8 Cyl 6.0L, 8 Cyl 6.2L
GMC Sierra Power Steering Pump
Each OEM GMC Sierra Power Steering Pump we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.
GMC Sierra Power Steering Pump Parts Questions & Experts Answers
A: To remove the power steering pump, start by removing the drivebelt and using a power steering pump pulley remover to remove the pulley. Then, remove the oil pan skid plate or engine shield, if equipped, and the intermediate shaft coupler from the steering gear input shaft and lower intermediate shaft. Unclip the wiring harness and disconnect the feed hose, pressure line, and oil cooler hose from the pump, plugging or capping all openings. Lift the pump from the vehicle, being careful not to spill fluid. To install the pump, position it in the mounting bracket and tighten the mounting fasteners to the specified torque. Connect the pressure line and feed hose, press the pulley onto the shaft using a pulley installer tool, and install the drivebelt and engine shield. Finally, fill the power steering reservoir with the recommended fluid and bleed the system.