My Garage
My Account
Cart
Genuine GMC Jimmy Power Steering Pump
Power Steering Pump Unit- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
16 Power Steering Pumps found
GMC Jimmy Pump Assembly, P/S
Part Number: 26019743$219.88 MSRP: $439.59You Save: $219.71 (50%)Ships in 1-2 Business Days
GMC Jimmy Pump Assembly, P/S
Part Number: 26019741$185.68 MSRP: $371.22You Save: $185.54 (50%)Ships in 1-2 Business Days
GMC Jimmy F, Pump
Part Number: 26003927$185.69 MSRP: $264.57You Save: $78.88 (30%)Ships in 1-2 Business Days
GMC Jimmy Pump Asm,P/S
Part Number: 7839797$448.31 MSRP: $472.60You Save: $24.29 (6%)Ships in 1-2 Business Days
GMC Jimmy Power Steering Pump
The Power Steering Pump is an important component in GMC Jimmy car where engine power is turned into hydraulic power to help the driver steer the car. The pump, in its process of supplying hydraulic power to the steering system, lessens the amount of effort required from the driver to turn the steering wheel hence easing the usage of vehicles. The GMC Jimmy Power Steering Pumps are sometimes connected to the crankshaft, by a belt, and the control valves; the hydraulic cylinders assists in the directions of the turn. Some of the usual problems that may be associated with a power steering pump include leakage, noise, absence of assist, and sensitivity problems; when analyzed, all these problems can be solved. In essence, the Power Steering Pump is a crucial component because of its contribution to the steering capability and workload reduction for the driver in managing the steering wheel.
Each OEM GMC Jimmy Power Steering Pump we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.
GMC Jimmy Power Steering Pump Parts Questions & Experts Answers
- Q: How do you remove the power steering pump?A: To remove the power steering pump, start by disconnecting the cable from the negative terminal of the battery. Then, remove the upper fan shroud and the serpentine drive belt. Use a special power steering pump pulley remover to remove the pulley from the pump. Place a drain pan under the pump and disconnect the pressure and return hoses, plugging them to prevent contaminants from entering. Remove the pump mounting fasteners and lift the pump from the vehicle, being careful not to spill fluid on painted surfaces. To install the new pump, position it in the mounting bracket and secure it with bolts and nuts. Connect the hoses and tighten the fittings securely. Use a special pulley installer tool or a fabricated alternative tool to press the pulley onto the shaft. Install the drive belt and fill the power steering reservoir with the recommended fluid. Finally, bleed the system to ensure proper functioning.
