My Garage
My Account
Cart
Genuine GMC Jimmy Brake Shoe
Brake Shoe Set- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
8 Brake Shoes found
GMC Jimmy Shoe Kit,Rear Brake
Part Number: 19152704$86.12 MSRP: $156.58You Save: $70.46 (45%)Ships in 1-2 Business Days
GMC Jimmy Shoe,Rear Brake
Part Number: 18029651$120.59 MSRP: $217.28You Save: $96.69 (45%)Ships in 1-3 Business Days
GMC Jimmy Shoe Kit,Rear Brake
Part Number: 19307565$72.04 MSRP: $132.43You Save: $60.39 (46%)Ships in 1-3 Business Days
GMC Jimmy Brake Shoe
The Brake Shoe of GMC Jimmy vehicles are essential in ensuring that the vehicle is halted through the interaction it has with the rotors. These shoes are associated with the drum brake assembly where they are clamped to a backing plate and functioned hydraulically by the means of the wheel cylinders. The friction linings are the components of the brake assembly that rub against the brake drum when brakes are operated and this helps to bring the vehicle to a stop. Different GMC Jimmy automobiles have had different kinds of brake shoptimal designs, including the non-servo and the duo-servo brake shoe models; the duo-servo are considered to provide higher degree of pulling force since they are self energizing in nature. The brake shoes should be inspected and serviced at least once in a while to attain one hundred percent efficiency on road.
Each OEM GMC Jimmy Brake Shoe we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.
GMC Jimmy Brake Shoe Parts Questions & Experts Answers
- Q: How to Inspect and Adjust Brake shoe on Chevrolet Blazer,S10,GMC Jimmy and Sonoma?A: To begin, loosen the wheel lug nuts and raise the rear of the vehicle, securely supporting it on jackstands. Block the front wheels to prevent the vehicle from rolling. Remove the rear wheels and then the brake drum. If the drum is stuck due to corrosion, apply penetrating oil and tap around the studs and flange to break it loose. If the drum is locked onto the shoes, use a screwdriver to push the actuator lever off the star adjuster and back off the adjuster wheel. Clean the brake assembly with brake system cleaner. Clean and inspect the brake drum for any damage or wear. Repeat these steps for the other rear brake assembly. Install the brake drums and adjust the shoes so they slightly drag on the drums. Install the rear wheels, lower the vehicle, and tighten the lug nuts. Check the brake pedal position and adjust further if necessary. Finally, test the brakes for proper operation before driving in traffic.
