My Garage
My Account
Cart
Genuine GMC Canyon Wheel Hub
Wheel Axle Hub- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
6 Wheel Hubs found
GMC Canyon Hub Assembly, Front Whl (W/ Brg)
Part Number: 84681709$153.19 MSRP: $303.96You Save: $150.77 (50%)Ships in 1-2 Business Days
GMC Canyon Hub Assembly, Front Whl (W/ Brg)
Part Number: 84654063$132.83 MSRP: $263.56You Save: $130.73 (50%)Ships in 1-2 Business Days
GMC Canyon HUB ASM-FRT WHL (W/ BRG)
Part Number: 13542340$100.70 MSRP: $180.62You Save: $79.92 (45%)Ships in 1-2 Business Days
GMC Canyon HUB,FRT WHL(W/BEARING)
Part Number: 13542341$101.65 MSRP: $182.34You Save: $80.69 (45%)Ships in 1-2 Business Days
GMC Canyon Wheel Hub
It is a component that plays a significant role by providing a linkage point of the wheels to the GMC Canyon vehicle while at the same time is fitted with parts such as wheel bearings and brake systems. This assembly also facilitates rotation of the wheels and assured fixing that enhances the safety and the steering of the vehicle. Throughout the years, GMC Canyon has chosen unprecedented Wheel Hub that differ in some of the characteristics including bolt pattern and axle-extension width. Although there are some global options available, it is better to choose a direct-fit part which will cater the needs of the GMC Canyon in the most appropriate way. Lack of appropriate installation and torque is very bad for the mechanical losses and that is why proper installation is appropriate for the Wheel Hub for its longevity and performance.
Each OEM GMC Canyon Wheel Hub we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.
GMC Canyon Wheel Hub Parts Questions & Experts Answers
- Q: How should the hub and bearing assembly be replaced if worn or damaged on GMC Canyon?A: The hub and bearing assembly is sealed-for-life and must be replaced as a unit if worn or damaged. For 2008 and earlier models, the ABS wheel speed sensor is an integral part of the hub/bearing assembly, which is also replaced as a unit. To begin removal, loosen the front wheel lug nuts, raise the vehicle, and support it securely on jackstands before removing the wheel. For 4WD models, remove the hub cover and unscrew the driveaxle/hub nut using a socket and large breaker bar, bracing a large prybar across two wheel studs or inserting a large screwdriver through the center of the brake caliper to prevent the hub from turning. Discard the nut and use a new one during installation. Next, remove the brake caliper and hang it out of the way with wire, then remove the caliper mounting bracket. For 2008 and earlier models, disconnect the ABS sensor electrical connector, mark the position of the bolts securing the ABS bracket, remove the bolts, and tie the harness and bracket aside. For 2009 and later models, remove the ABS wheel speed sensor from the Steering Knuckle, and on 4WD models, the steering knuckle must be removed for access to the hub/bearing assembly mounting bolts. Remove the hub and brake disc from the spindle as an assembly, taking off the bolts that secure the hub and bearing assembly to the steering knuckle, which will also remove the splash shield. With the disc/hub assembly on a flat surface, remove the bolts securing the disc to the hub. For installation, clean the mating surfaces on the hub and brake disc, assemble the disc and hub, and install the bolts, tightening them to the specified torque. Install the hub and bearing/brake disc assembly along with the disc splash shield to the steering knuckle, tightening the bolts to the specified torque. Complete the installation by reversing the removal procedure, installing the wheel, lowering the vehicle, and tightening the lug nuts to the specified torque.
