How do you remove the Steering Knuckle?

To start removing the driveaxle/hub, loosen the driveaxle/hub nut and also the wheel lug nuts. After that, raise vehicle and securely support it with jackstands so as to remove wheel. Thereafter, brake disc as well as ABS wheel speed sensor should be removed. It is also important to note that strut-to-knuckle nuts must be loosened after separating control arm from steering knuckle via control arm balljoint. In addition, steering knuckle arm must be separated from tie-rod end. Lastly, unfasten the knuckle from strut and through this process take away the knuckle. When installing the knuckle, maneuver it into place before slipping the drive axle into hub. Remember to install strut-to-knuckle bolts and nuts while fastening ball joint to knuckle by nut tightened to specified torque value. Attach tie-rod end to steering knuckle arm then screw in nut torque specification by manufacturer for this component assembly job. Besides this fact, exact tightening of strut-to-knuckle bolts must be ensured during this step too. Next on line would be fitting of wheel speed sensor plus harness bracket followed by brake disc and caliper/mounting bracket assembly combination part. Lastly, fit in tire together with eight lug nuts at their respective positions at which time one lower vehicle back down after which the lug nuts along with driveaxle/hub nut are tightened using proper torque specifications. It is also advisable that a front-end alignment check and adjust if needed.

Genuine GMC Acadia Steering Knuckle

Front Steering Knuckle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Steering Knuckles found

View related parts
GMC Acadia Steering Knuckle
Part Number: 25796983
$202.16 MSRP: $351.87
You Save: $149.71 (43%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle, Steering ; Knuckle, Steering; Knuckle
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2017 GMC Acadia | SPORT UTILITY VEHICLE 2WD, SPORT UTILITY VEHICLE 4WD, SPORT UTILITY VEHICLE AWD | 6 Cyl 3.6L
View related parts
GMC Acadia Steering Knuckle
Part Number: 25796982
$139.82 MSRP: $351.87
You Save: $212.05 (61%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle, Steering ; Knuckle, Steering; Knuckle
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2017 GMC Acadia | SPORT UTILITY VEHICLE 2WD, SPORT UTILITY VEHICLE 4WD, SPORT UTILITY VEHICLE AWD | 6 Cyl 3.6L
View related parts
GMC Acadia Steering Knuckle
Part Number: 84560115
$68.21 MSRP: $118.74
You Save: $50.53 (43%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle, Strg; Knuckle
- Replaces: 84437328, 84437326, 22985326
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2017-2021 GMC Acadia | DENALI SUV, SLE SUV, SLE2 & ALL TERRAIN SUV, SLE2 SUV, SLT & ALL TERRAIN SUV, SLT SUV, SLT2 SUV | 4 Cyl 2.0L, 4 Cyl 2.5L, 6 Cyl 3.6L
View related parts
GMC Acadia Steering Knuckle
Part Number: 84560116
$63.84 MSRP: $111.12
You Save: $47.28 (43%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle, Strg; Knuckle
- Replaces: 22985325, 84437325, 84437327
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2017-2021 GMC Acadia | DENALI SUV, SLE SUV, SLE2 & ALL TERRAIN SUV, SLE2 SUV, SLT & ALL TERRAIN SUV, SLT SUV, SLT2 SUV | 4 Cyl 2.0L, 4 Cyl 2.5L, 6 Cyl 3.6L
View related parts
GMC Acadia Rear Suspension Knuckle Assembly
Part Number: 84196224
$94.57 MSRP: $173.56
You Save: $78.99 (46%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle Assembly, Rear Suspension; Knuckle
- Position: Rear
- Replaced by: 26503836
- Replaces: 84196222, 84005628
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2017-2021 GMC Acadia | DENALI SUV, SLE SUV, SLE2 & ALL TERRAIN SUV, SLE2 SUV, SLT & ALL TERRAIN SUV, SLT SUV, SLT2 SUV | 4 Cyl 2.0L, 4 Cyl 2.5L, 6 Cyl 3.6L
View related parts
GMC Acadia Rear Suspension Knuckle Assembly
Part Number: 84196225
$99.72 MSRP: $173.56
You Save: $73.84 (43%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle Assembly, Rear Suspension; Knuckle
- Position: Rear
- Replaced by: 26503837
- Replaces: 84005629, 84196223
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2017-2021 GMC Acadia | DENALI SUV, SLE SUV, SLE2 & ALL TERRAIN SUV, SLE2 SUV, SLT & ALL TERRAIN SUV, SLT SUV, SLT2 SUV | 4 Cyl 2.0L, 4 Cyl 2.5L, 6 Cyl 3.6L
View related parts
GMC Acadia Rear Steering Knuckle Assembly
Part Number: 10391041
$124.94 MSRP: $197.47
You Save: $72.53 (37%)
Product Specifications
- Other Name: Knuckle Asm,Rear Suspension ; Knuckle, Rear Wheel; Knuckle
- Position: Rear
- Replaced by: 23400077
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2017 GMC Acadia | SPORT UTILITY VEHICLE 2WD, SPORT UTILITY VEHICLE 4WD, SPORT UTILITY VEHICLE AWD | 6 Cyl 3.6L
View related parts
GMC Acadia Rear Suspension Knuckle Assembly
Part Number: 23400078
$143.52 MSRP: $226.84
You Save: $83.32 (37%)
Product Specifications
- Other Name: Knuckle Assembly, Rear Suspension; Knuckle
- Position: Rear
- Replaces: 10391042
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2017 GMC Acadia | SPORT UTILITY VEHICLE 2WD, SPORT UTILITY VEHICLE 4WD, SPORT UTILITY VEHICLE AWD | 6 Cyl 3.6L

GMC Acadia Steering Knuckle Parts Questions & Experts Answers

Steering Knuckle
25796983
Q: How do you remove the Steering Knuckle?
A: To start removing the driveaxle/hub, loosen the driveaxle/hub nut and also the wheel lug nuts. After that, raise vehicle and securely support it with jackstands so as to remove wheel. Thereafter, brake disc as well as ABS wheel speed sensor should be removed. It is also important to note that strut-to-knuckle nuts must be loosened after separating Control Arm from steering knuckle via control arm balljoint. In addition, steering knuckle arm must be separated from tie-rod end. Lastly, unfasten the knuckle from strut and through this process take away the knuckle. When installing the knuckle, maneuver it into place before slipping the drive axle into hub. Remember to install strut-to-knuckle bolts and nuts while fastening Ball Joint to knuckle by nut tightened to specified torque value. Attach tie-rod end to steering knuckle arm then screw in nut torque specification by manufacturer for this component assembly job. Besides this fact, exact tightening of strut-to-knuckle bolts must be ensured during this step too. Next on line would be fitting of wheel speed sensor plus harness bracket followed by brake disc and caliper/mounting bracket assembly combination part. Lastly, fit in tire together with eight lug nuts at their respective positions at which time one lower vehicle back down after which the lug nuts along with driveaxle/hub nut are tightened using proper torque specifications. It is also advisable that a front-end alignment check and adjust if needed.

Related GMC Acadia Parts

Browse by Year

2021 Steering Knuckle 2020 Steering Knuckle 2019 Steering Knuckle 2018 Steering Knuckle 2017 Steering Knuckle 2016 Steering Knuckle 2015 Steering Knuckle 2014 Steering Knuckle 2013 Steering Knuckle 2012 Steering Knuckle 2011 Steering Knuckle 2010 Steering Knuckle 2009 Steering Knuckle 2008 Steering Knuckle 2007 Steering Knuckle