How do you remove the front Wheel Hub in Buick Enclave,Chevrolet Traverse and GMC Acadia?

To remove the driveaxle/hub, begin by loosening the driveaxle/hub and wheel lug nuts. Then, raise the vehicle and secure it on jackstands before removing the wheels. Remove the driveaxle/hub nut and the brake disc and use wire to support the driveaxle. Proceed to remove the hub and bearing assembly mounting bolts and then remove the hub and bearing unit. If the unit is stuck to the driveaxle, tap the driveaxle end with a hammer and a block of wood or use a puller to separate it from the knuckle, taking care not to damage the threads. For installation, simply reverse the removal steps and tighten the bolts to the specified torque.

How do you remove the rear Wheel Hub for Buick Enclave,Chevrolet Traverse and GMC Acadia?

To remove the rear wheel, start by loosening the lug nuts. Then, raise the rear of the vehicle and support it securely on jackstands. Remove the wheel and block the front wheels to prevent the vehicle from rolling off the stands. If you have an AWD model, remove the rear driveaxle/hub nut. Next, remove the brake disc and then detach the hub and bearing assembly from the knuckle by removing the bolts. If you have an AWD model, guide the driveaxle stub shaft out of the hub spines as you do this. If the shaft is stuck, you can use a rubber mallet, brass hammer, or a puller to remove it. To install the rear wheel, simply reverse the removal steps. Tighten the hub and bearing bolts to the specified torque and, for AWD models, tighten the driveaxle/hub nut to the suitable torque. Finally, install the wheel and lug nuts, lower the vehicle, and tighten the lug nuts to the specified torque.

Genuine Chevrolet Traverse Wheel Hub

Wheel Axle Hub

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Wheel Hubs found

View related parts
Chevrolet Traverse HUB ASM-FRT WHL
Part Number: 13552419
$86.52 MSRP: $171.65
You Save: $85.13 (50%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaces: 13536110, 13544385, 13510437, 13512896, 13591194
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2024 Chevrolet Traverse | 1LT/2LT EXTENDED 4 DOOR SUV, 1LZ/2LZ EXTENDED 4 DOOR SUV, LS EXTENDED 4 DOOR SUV, LT EXTENDED 4 DOOR SUV, LTZ EXTENDED 4 DOOR SUV | 4 Cyl 2.0L, 6 Cyl 3.6L
View related parts
Chevrolet Traverse HUB ASM,FRT WHL
Part Number: 19434718
$97.22 MSRP: $192.88
You Save: $95.66 (50%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Front Hub & Bearing, Hub, Hub & Bearing
- Replaces: 22756832, 25784448, 25848366
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2017 Chevrolet Traverse | SPORT UTILITY VEHICLE 2WD, SPORT UTILITY VEHICLE 4WD, SPORT UTILITY VEHICLE AWD | 6 Cyl 3.6L
View related parts
Chevrolet Traverse HUB ASM-RR WHL
Part Number: 13552420
$86.36 MSRP: $154.90
You Save: $68.54 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub Assembly
- Replaces: 13510438, 13544387, 13536111, 13591196, 13512897
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2024 Chevrolet Traverse | 1LT/2LT EXTENDED 4 DOOR SUV, 1LZ/2LZ EXTENDED 4 DOOR SUV, LS EXTENDED 4 DOOR SUV, LT EXTENDED 4 DOOR SUV, LTZ EXTENDED 4 DOOR SUV | 4 Cyl 2.0L, 6 Cyl 3.6L
View related parts
Chevrolet Traverse HUB ASM-RR WHL
Part Number: 13560188
$85.82 MSRP: $153.94
You Save: $68.12 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2024 Chevrolet Traverse | LS 4 DOOR APV EXTENDED , LT 4 DOOR APV EXTENDED , PREM 4 DOOR APV EXTENDED, Z71 4 DOOR APV EXTENDED | 4 Cyl 2.5L
View related parts
Chevrolet Traverse HUB ASM-RR WHL
Part Number: 13560187
$87.49 MSRP: $156.94
You Save: $69.45 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2024 Chevrolet Traverse | LS 4 DOOR APV EXTENDED , LT 4 DOOR APV EXTENDED , PREM 4 DOOR APV EXTENDED | 4 Cyl 2.5L

Chevrolet Traverse Wheel Hub

Wheel Hub is a part of Chevrolet traverse cars that holds the wheel bearings, sensors and brake parts, and acts as a tool that connects the wheels of the car. Currently, there are different types of hub and bearings assembly and many of these are as follows: the unit assembly that has the ABS sensor. The bearings which are worn out or loose pose to the problem of noise and vibration, resulting to poor performance and unsafe inference. lubrication is also important and should be performed as required, and during inspection the bearings and races should be examined for roughness, play, and manifestation of damage etc. Orders and adjustments as well as the replacement of parts damaged by the presence of grease are critical in restoring the device's performance to safe levels. That's why the Wheel Hub Assembly (WHA) of the Chevrolet Traverse vehicles is important as it enables the wheels to rotate evenly as well as helps in securely fixing the wheels to the vehicle enhancing efficiency and durability.

Each OEM Chevrolet Traverse Wheel Hub we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Chevrolet Traverse Wheel Hub Parts Questions & Experts Answers

Front Wheel Bearing
22756832
Q: How do you remove the front Wheel Hub in Buick Enclave,Chevrolet Traverse and GMC Acadia?
A: To remove the driveaxle/hub, begin by loosening the driveaxle/hub and wheel lug nuts. Then, raise the vehicle and secure it on jackstands before removing the wheels. Remove the driveaxle/hub nut and the brake disc and use wire to support the driveaxle. Proceed to remove the hub and bearing assembly mounting bolts and then remove the hub and bearing unit. If the unit is stuck to the driveaxle, tap the driveaxle end with a hammer and a block of wood or use a puller to separate it from the knuckle, taking care not to damage the threads. For installation, simply reverse the removal steps and tighten the bolts to the specified torque.
Front Wheel Bearing
22756832
Q: How do you remove the rear Wheel Hub for Buick Enclave,Chevrolet Traverse and GMC Acadia?
A: To remove the rear wheel, start by loosening the lug nuts. Then, raise the rear of the vehicle and support it securely on jackstands. Remove the wheel and block the front wheels to prevent the vehicle from rolling off the stands. If you have an AWD model, remove the rear driveaxle/hub nut. Next, remove the brake disc and then detach the hub and bearing assembly from the knuckle by removing the bolts. If you have an AWD model, guide the driveaxle stub shaft out of the hub spines as you do this. If the shaft is stuck, you can use a rubber mallet, brass hammer, or a puller to remove it. To install the rear wheel, simply reverse the removal steps. Tighten the hub and bearing bolts to the specified torque and, for AWD models, tighten the driveaxle/hub nut to the suitable torque. Finally, install the wheel and lug nuts, lower the vehicle, and tighten the lug nuts to the specified torque.