How do you remove the caliper and Bracket for Buick Enclave,Chevrolet Traverse,GMC Acadia and Saturn Outlook?

To remove the brake caliper, start by loosening the wheel lug nuts and raising the vehicle on jackstands. Remove the wheels and then disconnect the brake hose from the caliper by removing the banjo fitting bolt. Remember to discard the sealing washers and plug the brake hose to prevent any contamination or fluid loss. Use hand tools to remove the upper guide pin bolt and securely hang the caliper out of the way if necessary. To remove the brake caliper bracket, remove the two bracket bolts and clean any remaining thread-locking material. For installation, use a high-temperature thread-lock on the brake caliper bracket bolts. Start by installing the caliper to the bracket, starting with the bolt closest to the bleed valve, and tighten the guide pin bolts to the proper torque specifications. Finally, bleed the brake system, check for any leaks, and test the brakes before returning the vehicle to normal service.

Genuine Chevrolet Traverse Brake Caliper Bracket

Caliper Bracket

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Brake Caliper Brackets found

View related parts
Chevrolet Traverse Bracket, Rear Brake Caliper
Part Number: 15855610
$42.56 MSRP: $80.30
You Save: $37.74 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: BRACKET, Wheel Brake Cylinder/Caliper; Caliper Support
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2017 Chevrolet Traverse | SPORT UTILITY VEHICLE 2WD, SPORT UTILITY VEHICLE 4WD, SPORT UTILITY VEHICLE AWD | 6 Cyl 3.6L
View related parts
Chevrolet Traverse Bracket, Rear Brake Caliper
Part Number: 15855617
$45.29 MSRP: $81.25
You Save: $35.96 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: BRACKET, Wheel Brake Cylinder/Caliper; Caliper Support
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2017 Chevrolet Traverse | SPORT UTILITY VEHICLE 2WD, SPORT UTILITY VEHICLE 4WD, SPORT UTILITY VEHICLE AWD | 6 Cyl 3.6L
View related parts
Chevrolet Traverse Bracket,Front Brake Caliper
Part Number: 88965672
$74.36 MSRP: $116.99
You Save: $42.63 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: BRACKET, Wheel Brake Cylinder/Caliper; Caliper Mount, Caliper Support
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2017 Chevrolet Traverse | SPORT UTILITY VEHICLE 2WD, SPORT UTILITY VEHICLE 4WD, SPORT UTILITY VEHICLE AWD | 6 Cyl 3.6L
View related parts
Chevrolet Traverse Bracket,Front Brake Caliper
Part Number: 88965679
$80.13 MSRP: $114.13
You Save: $34.00 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: BRACKET, Wheel Brake Cylinder/Caliper; Caliper Mount, Caliper Support
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2017 Chevrolet Traverse | SPORT UTILITY VEHICLE 2WD, SPORT UTILITY VEHICLE 4WD, SPORT UTILITY VEHICLE AWD | 6 Cyl 3.6L
View related parts
Chevrolet Traverse Bracket, Front Brake Caliper
Part Number: 13595196
$36.07 MSRP: $64.70
You Save: $28.63 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: BRACKET, Wheel Brake Cylinder/Caliper; Caliper Support
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2020 Chevrolet Traverse | LS EXTENDED 4 DOOR SUV, LT EXTENDED 4 DOOR SUV, LTZ EXTENDED 4 DOOR SUV | 4 Cyl 2.0L, 6 Cyl 3.6L
View related parts
Chevrolet Traverse Bracket,Rear Brake Caliper
Part Number: 13596671
$18.90 MSRP: $35.66
You Save: $16.76 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: BRACKET, Wheel Brake Cylinder/Caliper; Caliper Support
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2021 Chevrolet Traverse | LS EXTENDED 4 DOOR SUV, LT EXTENDED 4 DOOR SUV, LTZ EXTENDED 4 DOOR SUV | 4 Cyl 2.0L, 6 Cyl 3.6L
View related parts
Chevrolet Traverse Bracket Kit, Front Brk Clpr
Part Number: 13542416
$41.83 MSRP: $75.05
You Save: $33.22 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Support
- Position: Front
- Replaced by: 13552564
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2020-2021 Chevrolet Traverse | LS EXTENDED 4 DOOR SUV, LT EXTENDED 4 DOOR SUV, LTZ EXTENDED 4 DOOR SUV | 6 Cyl 3.6L

Chevrolet Traverse Brake Caliper Bracket Parts Questions & Experts Answers

Bracket,Front Brake Caliper
88965672
Q: How do you remove the caliper and Bracket for Buick Enclave,Chevrolet Traverse,GMC Acadia and Saturn Outlook?
A: To remove the brake caliper, start by loosening the wheel lug nuts and raising the vehicle on jackstands. Remove the wheels and then disconnect the brake hose from the caliper by removing the banjo fitting bolt. Remember to discard the sealing washers and plug the brake hose to prevent any contamination or fluid loss. Use hand tools to remove the upper guide pin bolt and securely hang the caliper out of the way if necessary. To remove the brake caliper bracket, remove the two bracket bolts and clean any remaining thread-locking material. For installation, use a high-temperature thread-lock on the brake caliper bracket bolts. Start by installing the caliper to the bracket, starting with the bolt closest to the bleed valve, and tighten the guide pin bolts to the proper torque specifications. Finally, bleed the brake system, check for any leaks, and test the brakes before returning the vehicle to normal service.